[PATCH v2 0/6] Add support of two Audio PLL source
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being configured to handle 8kHz and 11kHz series audio rates.
The patches implement the functionality to select at runtime the appropriate AUDIO PLL for root clock, if there is no two PLL registered, then no action taken.
change in v2: - simply the logic for calling reparent function
Shengjiu Wang (6): ASoC: fsl_utils: Add function to handle PLL clock source ASoC: fsl_spdif: Add support for PLL switch at runtime. ASoC: fsl_micfil: Add support for PLL switch at runtime ASoC: fsl_sai: Add support for PLL switch at runtime ASoC: dt-bindings: fsl_spdif: Add two PLL clock source ASoC: dt-bindings: fsl-sai: Add two PLL clock source
.../devicetree/bindings/sound/fsl,spdif.yaml | 4 ++ .../devicetree/bindings/sound/fsl-sai.txt | 3 + sound/soc/fsl/Kconfig | 3 + sound/soc/fsl/fsl_micfil.c | 31 +++++++++ sound/soc/fsl/fsl_sai.c | 38 ++++++++++ sound/soc/fsl/fsl_sai.h | 2 + sound/soc/fsl/fsl_spdif.c | 48 +++++++++++-- sound/soc/fsl/fsl_utils.c | 69 +++++++++++++++++++ sound/soc/fsl/fsl_utils.h | 7 ++ 9 files changed, 200 insertions(+), 5 deletions(-)
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being configured to handle 8kHz and 11kHz series audio rates. Add common function in fsl_utils to handle these two PLL clock source, which are needed by CPU DAI drivers
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- sound/soc/fsl/fsl_utils.c | 69 +++++++++++++++++++++++++++++++++++++++ sound/soc/fsl/fsl_utils.h | 7 ++++ 2 files changed, 76 insertions(+)
diff --git a/sound/soc/fsl/fsl_utils.c b/sound/soc/fsl/fsl_utils.c index 9bab202569af..b75843e31f00 100644 --- a/sound/soc/fsl/fsl_utils.c +++ b/sound/soc/fsl/fsl_utils.c @@ -6,6 +6,8 @@ // // Copyright 2010 Freescale Semiconductor, Inc.
+#include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/module.h> #include <linux/of_address.h> #include <sound/soc.h> @@ -83,6 +85,73 @@ int fsl_asoc_get_dma_channel(struct device_node *ssi_np, } EXPORT_SYMBOL(fsl_asoc_get_dma_channel);
+/** + * fsl_asoc_get_pll_clocks - get two PLL clock source + * + * @dev: device pointer + * @pll8k_clk: PLL clock pointer for 8kHz + * @pll11k_clk: PLL clock pointer for 11kHz + * + * This function get two PLL clock source + */ +void fsl_asoc_get_pll_clocks(struct device *dev, struct clk **pll8k_clk, + struct clk **pll11k_clk) +{ + *pll8k_clk = devm_clk_get(dev, "pll8k"); + if (IS_ERR(*pll8k_clk)) + *pll8k_clk = NULL; + + *pll11k_clk = devm_clk_get(dev, "pll11k"); + if (IS_ERR(*pll11k_clk)) + *pll11k_clk = NULL; +} +EXPORT_SYMBOL(fsl_asoc_get_pll_clocks); + +/** + * fsl_asoc_reparent_pll_clocks - set clock parent if necessary + * + * @dev: device pointer + * @clk: root clock pointer + * @pll8k_clk: PLL clock pointer for 8kHz + * @pll11k_clk: PLL clock pointer for 11kHz + * @ratio: target requency for root clock + * + * This function set root clock parent according to the target ratio + */ +void fsl_asoc_reparent_pll_clocks(struct device *dev, struct clk *clk, + struct clk *pll8k_clk, + struct clk *pll11k_clk, u64 ratio) +{ + struct clk *p, *pll = 0, *npll = 0; + bool reparent = false; + int ret = 0; + + if (!clk || !pll8k_clk || !pll11k_clk) + return; + + p = clk; + while (p && pll8k_clk && pll11k_clk) { + struct clk *pp = clk_get_parent(p); + + if (clk_is_match(pp, pll8k_clk) || + clk_is_match(pp, pll11k_clk)) { + pll = pp; + break; + } + p = pp; + } + + npll = (do_div(ratio, 8000) ? pll11k_clk : pll8k_clk); + reparent = (pll && !clk_is_match(pll, npll)); + + if (reparent) { + ret = clk_set_parent(p, npll); + if (ret < 0) + dev_warn(dev, "failed to set parent %s: %d\n", __clk_get_name(npll), ret); + } +} +EXPORT_SYMBOL(fsl_asoc_reparent_pll_clocks); + MODULE_AUTHOR("Timur Tabi timur@freescale.com"); MODULE_DESCRIPTION("Freescale ASoC utility code"); MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/fsl/fsl_utils.h b/sound/soc/fsl/fsl_utils.h index c5dc2a14b492..4d5f3d93bc81 100644 --- a/sound/soc/fsl/fsl_utils.h +++ b/sound/soc/fsl/fsl_utils.h @@ -19,4 +19,11 @@ int fsl_asoc_get_dma_channel(struct device_node *ssi_np, const char *name, struct snd_soc_dai_link *dai, unsigned int *dma_channel_id, unsigned int *dma_id); + +void fsl_asoc_get_pll_clocks(struct device *dev, struct clk **pll8k_clk, + struct clk **pll11k_clk); + +void fsl_asoc_reparent_pll_clocks(struct device *dev, struct clk *clk, + struct clk *pll8k_clk, + struct clk *pll11k_clk, u64 ratio); #endif /* _FSL_UTILS_H */
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being configured to handle 8kHz and 11kHz series audio rates.
The patch implements the functionality to select at runtime the appropriate AUDIO PLL as function of audio file rate. As the clock parent may be changed, need to probe txclk according to sample rate again.
Signed-off-by: Viorel Suman viorel.suman@nxp.com Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- sound/soc/fsl/Kconfig | 1 + sound/soc/fsl/fsl_spdif.c | 48 +++++++++++++++++++++++++++++++++++---- 2 files changed, 44 insertions(+), 5 deletions(-)
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 10fa38753453..910b8747b6bd 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -59,6 +59,7 @@ config SND_SOC_FSL_SPDIF select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_TZIC || MXC_AVIC) select BITREVERSE + select SND_SOC_FSL_UTILS help Say Y if you want to add Sony/Philips Digital Interface (SPDIF) support for the Freescale CPUs. diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index 0504431792cf..7fc1c96929bb 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -23,6 +23,7 @@ #include <sound/soc.h>
#include "fsl_spdif.h" +#include "fsl_utils.h" #include "imx-pcm.h"
#define FSL_SPDIF_TXFIFO_WML 0x8 @@ -114,6 +115,8 @@ struct spdif_mixer_control { * @dma_params_rx: DMA parameters for receive channel * @regcache_srpc: regcache for SRPC * @bypass: status of bypass input to output + * @pll8k_clk: PLL clock for the rate of multiply of 8kHz + * @pll11k_clk: PLL clock for the rate of multiply of 11kHz */ struct fsl_spdif_priv { const struct fsl_spdif_soc_data *soc; @@ -137,6 +140,8 @@ struct fsl_spdif_priv { /* regcache for SRPC */ u32 regcache_srpc; bool bypass; + struct clk *pll8k_clk; + struct clk *pll11k_clk; };
static struct fsl_spdif_soc_data fsl_spdif_vf610 = { @@ -480,6 +485,8 @@ static int spdif_set_rx_clksrc(struct fsl_spdif_priv *spdif_priv, return 0; }
+static int fsl_spdif_probe_txclk(struct fsl_spdif_priv *spdif_priv, enum spdif_txrate index); + static int spdif_set_sample_rate(struct snd_pcm_substream *substream, int sample_rate) { @@ -528,6 +535,10 @@ static int spdif_set_sample_rate(struct snd_pcm_substream *substream, return -EINVAL; }
+ ret = fsl_spdif_probe_txclk(spdif_priv, rate); + if (ret) + return ret; + clk = spdif_priv->txclk_src[rate]; if (clk >= STC_TXCLK_SRC_MAX) { dev_err(&pdev->dev, "tx clock source is out of range\n"); @@ -647,6 +658,29 @@ static void fsl_spdif_shutdown(struct snd_pcm_substream *substream, } }
+static int spdif_reparent_rootclk(struct fsl_spdif_priv *spdif_priv, unsigned int sample_rate) +{ + struct platform_device *pdev = spdif_priv->pdev; + struct clk *clk; + int ret; + + /* Reparent clock if required condition is true */ + if (!fsl_spdif_can_set_clk_rate(spdif_priv, STC_TXCLK_SPDIF_ROOT)) + return 0; + + /* Get root clock */ + clk = spdif_priv->txclk[STC_TXCLK_SPDIF_ROOT]; + + /* Disable clock first, for it was enabled by pm_runtime */ + clk_disable_unprepare(clk); + fsl_asoc_reparent_pll_clocks(&pdev->dev, clk, spdif_priv->pll8k_clk, + spdif_priv->pll11k_clk, sample_rate); + ret = clk_prepare_enable(clk); + if (ret) + return ret; + + return 0; +} static int fsl_spdif_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) @@ -659,6 +693,13 @@ static int fsl_spdif_hw_params(struct snd_pcm_substream *substream, int ret = 0;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + ret = spdif_reparent_rootclk(spdif_priv, sample_rate); + if (ret) { + dev_err(&pdev->dev, "%s: reparent root clk failed: %d\n", + __func__, sample_rate); + return ret; + } + ret = spdif_set_sample_rate(substream, sample_rate); if (ret) { dev_err(&pdev->dev, "%s: set sample rate failed: %d\n", @@ -1548,11 +1589,8 @@ static int fsl_spdif_probe(struct platform_device *pdev) } spdif_priv->rxclk_src = DEFAULT_RXCLK_SRC;
- for (i = 0; i < SPDIF_TXRATE_MAX; i++) { - ret = fsl_spdif_probe_txclk(spdif_priv, i); - if (ret) - return ret; - } + fsl_asoc_get_pll_clocks(&pdev->dev, &spdif_priv->pll8k_clk, + &spdif_priv->pll11k_clk);
/* Initial spinlock for control data */ ctrl = &spdif_priv->fsl_spdif_control;
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being configured to handle 8kHz and 11kHz series audio rates.
The patch implements the functionality to select at runtime the appropriate AUDIO PLL as function of audio file rate.
Signed-off-by: Viorel Suman viorel.suman@nxp.com Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- sound/soc/fsl/Kconfig | 1 + sound/soc/fsl/fsl_micfil.c | 31 +++++++++++++++++++++++++++++++ 2 files changed, 32 insertions(+)
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 910b8747b6bd..533937166b4a 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -81,6 +81,7 @@ config SND_SOC_FSL_MICFIL select REGMAP_MMIO select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n select SND_SOC_GENERIC_DMAENGINE_PCM + select SND_SOC_FSL_UTILS help Say Y if you want to add Pulse Density Modulation microphone interface (MICFIL) support for NXP. diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c index 18ab80b68752..431278bfbd7b 100644 --- a/sound/soc/fsl/fsl_micfil.c +++ b/sound/soc/fsl/fsl_micfil.c @@ -24,6 +24,7 @@ #include <sound/core.h>
#include "fsl_micfil.h" +#include "fsl_utils.h"
#define MICFIL_OSR_DEFAULT 16
@@ -42,6 +43,8 @@ struct fsl_micfil { const struct fsl_micfil_soc_data *soc; struct clk *busclk; struct clk *mclk; + struct clk *pll8k_clk; + struct clk *pll11k_clk; struct snd_dmaengine_dai_dma_data dma_params_rx; struct sdma_peripheral_config sdmacfg; unsigned int dataline; @@ -283,6 +286,27 @@ static int fsl_micfil_trigger(struct snd_pcm_substream *substream, int cmd, return 0; }
+static int fsl_micfil_reparent_rootclk(struct fsl_micfil *micfil, unsigned int sample_rate) +{ + struct device *dev = &micfil->pdev->dev; + u64 ratio = sample_rate; + struct clk *clk; + int ret; + + /* Get root clock */ + clk = micfil->mclk; + + /* Disable clock first, for it was enabled by pm_runtime */ + clk_disable_unprepare(clk); + fsl_asoc_reparent_pll_clocks(dev, clk, micfil->pll8k_clk, + micfil->pll11k_clk, ratio); + ret = clk_prepare_enable(clk); + if (ret) + return ret; + + return 0; +} + static int fsl_micfil_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) @@ -306,6 +330,10 @@ static int fsl_micfil_hw_params(struct snd_pcm_substream *substream, if (ret) return ret;
+ ret = fsl_micfil_reparent_rootclk(micfil, rate); + if (ret) + return ret; + ret = clk_set_rate(micfil->mclk, rate * clk_div * osr * 8); if (ret) return ret; @@ -610,6 +638,9 @@ static int fsl_micfil_probe(struct platform_device *pdev) return PTR_ERR(micfil->busclk); }
+ fsl_asoc_get_pll_clocks(&pdev->dev, &micfil->pll8k_clk, + &micfil->pll11k_clk); + /* init regmap */ regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res); if (IS_ERR(regs))
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being configured to handle 8kHz and 11kHz series audio rates.
The patch implements the functionality to select at runtime the appropriate AUDIO PLL as function of sysclk rate.
Signed-off-by: Viorel Suman viorel.suman@nxp.com Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- sound/soc/fsl/Kconfig | 1 + sound/soc/fsl/fsl_sai.c | 38 ++++++++++++++++++++++++++++++++++++++ sound/soc/fsl/fsl_sai.h | 2 ++ 3 files changed, 41 insertions(+)
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 533937166b4a..614eceda6b9e 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -19,6 +19,7 @@ config SND_SOC_FSL_SAI select REGMAP_MMIO select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n select SND_SOC_GENERIC_DMAENGINE_PCM + select SND_SOC_FSL_UTILS help Say Y if you want to add Synchronous Audio Interface (SAI) support for the Freescale CPUs. diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index a0ddaf7e9f60..974ba0780b19 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -23,6 +23,7 @@ #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include "fsl_sai.h" +#include "fsl_utils.h" #include "imx-pcm.h"
#define FSL_SAI_FLAGS (FSL_SAI_CSR_SEIE |\ @@ -220,14 +221,48 @@ static int fsl_sai_set_dai_sysclk_tr(struct snd_soc_dai *cpu_dai, return 0; }
+static int fsl_sai_set_mclk_rate(struct snd_soc_dai *dai, int clk_id, unsigned int freq) +{ + struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai); + int ret; + + fsl_asoc_reparent_pll_clocks(dai->dev, sai->mclk_clk[clk_id], + sai->pll8k_clk, sai->pll11k_clk, freq); + + ret = clk_set_rate(sai->mclk_clk[clk_id], freq); + if (ret < 0) + dev_err(dai->dev, "failed to set clock rate (%u): %d\n", freq, ret); + + return ret; +} + static int fsl_sai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, int clk_id, unsigned int freq, int dir) { + struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); int ret;
if (dir == SND_SOC_CLOCK_IN) return 0;
+ if (freq > 0 && clk_id != FSL_SAI_CLK_BUS) { + if (clk_id < 0 || clk_id >= FSL_SAI_MCLK_MAX) { + dev_err(cpu_dai->dev, "Unknown clock id: %d\n", clk_id); + return -EINVAL; + } + + if (IS_ERR_OR_NULL(sai->mclk_clk[clk_id])) { + dev_err(cpu_dai->dev, "Unassigned clock: %d\n", clk_id); + return -EINVAL; + } + + if (sai->mclk_streams == 0) { + ret = fsl_sai_set_mclk_rate(cpu_dai, clk_id, freq); + if (ret < 0) + return ret; + } + } + ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq, true); if (ret) { dev_err(cpu_dai->dev, "Cannot set tx sysclk: %d\n", ret); @@ -1281,6 +1316,9 @@ static int fsl_sai_probe(struct platform_device *pdev) else sai->mclk_clk[0] = sai->bus_clk;
+ fsl_asoc_get_pll_clocks(&pdev->dev, &sai->pll8k_clk, + &sai->pll11k_clk); + /* read dataline mask for rx and tx*/ ret = fsl_sai_read_dlcfg(sai); if (ret < 0) { diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h index 9bb8ced520c8..17956b5731dc 100644 --- a/sound/soc/fsl/fsl_sai.h +++ b/sound/soc/fsl/fsl_sai.h @@ -273,6 +273,8 @@ struct fsl_sai { struct regmap *regmap; struct clk *bus_clk; struct clk *mclk_clk[FSL_SAI_MCLK_MAX]; + struct clk *pll8k_clk; + struct clk *pll11k_clk; struct resource *res;
bool is_consumer_mode;
Add two PLL clock source, they are the parent clocks of root clock one is for 8kHz series rates, another one is for 11kHz series rates. They are optional clocks, if there are such clocks, then driver can switch between them for supporting more accurate rates.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- Documentation/devicetree/bindings/sound/fsl,spdif.yaml | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml index f226ec13167a..1d64e8337aa4 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml @@ -58,6 +58,8 @@ properties: slave of the Shared Peripheral Bus and when two or more bus masters (CPU, DMA or DSP) try to access it. This property is optional depending on the SoC design. + - description: PLL clock source for 8kHz series rate, optional. + - description: PLL clock source for 11khz series rate, optional. minItems: 9
clock-names: @@ -72,6 +74,8 @@ properties: - const: rxtx6 - const: rxtx7 - const: spba + - const: pll8k + - const: pll11k minItems: 9
big-endian:
On Fri, 01 Jul 2022 17:32:40 +0800, Shengjiu Wang wrote:
Add two PLL clock source, they are the parent clocks of root clock one is for 8kHz series rates, another one is for 11kHz series rates. They are optional clocks, if there are such clocks, then driver can switch between them for supporting more accurate rates.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com
Documentation/devicetree/bindings/sound/fsl,spdif.yaml | 4 ++++ 1 file changed, 4 insertions(+)
Acked-by: Rob Herring robh@kernel.org
Add two PLL clock source, they are the parent clocks of root clock one is for 8kHz series rates, another one is for 11kHz series rates. They are optional clocks, if there are such clocks, then driver can switch between them for supporting more accurate rates.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- Documentation/devicetree/bindings/sound/fsl-sai.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 4c66e6a1a533..fbdefc3fade7 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -21,6 +21,9 @@ Required properties: - clock-names : Must include the "bus" for register access and "mclk1", "mclk2", "mclk3" for bit clock and frame clock providing. + "pll8k", "pll11k" are optional, they are the clock + source for root clock, one is for 8kHz series rates + another one is for 11kHz series rates. - dmas : Generic dma devicetree binding as described in Documentation/devicetree/bindings/dma/dma.txt.
On Fri, 01 Jul 2022 17:32:41 +0800, Shengjiu Wang wrote:
Add two PLL clock source, they are the parent clocks of root clock one is for 8kHz series rates, another one is for 11kHz series rates. They are optional clocks, if there are such clocks, then driver can switch between them for supporting more accurate rates.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com
Documentation/devicetree/bindings/sound/fsl-sai.txt | 3 +++ 1 file changed, 3 insertions(+)
Acked-by: Rob Herring robh@kernel.org
On Fri, 1 Jul 2022 17:32:35 +0800, Shengjiu Wang wrote:
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being configured to handle 8kHz and 11kHz series audio rates.
The patches implement the functionality to select at runtime the appropriate AUDIO PLL for root clock, if there is no two PLL registered, then no action taken.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/6] ASoC: fsl_utils: Add function to handle PLL clock source commit: 7bad8125549cda14d9ccf97d7d76f7ef6ac9d206 [2/6] ASoC: fsl_spdif: Add support for PLL switch at runtime. commit: 34dcdebecf2f05e1b275e1da8352f8e4c1aab6f6 [3/6] ASoC: fsl_micfil: Add support for PLL switch at runtime commit: 93f54100fbdedc22e8d88d037a8a3e32101724eb [4/6] ASoC: fsl_sai: Add support for PLL switch at runtime commit: 7cb7f07d2491a3435578ab97eeeb70fadac6385c [5/6] ASoC: dt-bindings: fsl_spdif: Add two PLL clock source commit: df0835a810c1585bd54ffb10db92b455e922c7ec [6/6] ASoC: dt-bindings: fsl-sai: Add two PLL clock source commit: 6c06ad34eda9e1990313ff80999e1a75a02fa1c0
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (3)
-
Mark Brown -
Rob Herring -
Shengjiu Wang