[PATCH v2 0/2] sound/soc: Use platform_get_irq() to fetch IRQ's
Hi All,
This patch series aims to drop using platform_get_resource() for IRQ types in preparation for removal of static setup of IRQ resource from DT core code.
Dropping usage of platform_get_resource() was agreed based on the discussion [0].
[0] https://patchwork.kernel.org/project/linux-renesas-soc/ patch/20211209001056.29774-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
Cheers, Prabhakar
Lad Prabhakar (2): ASoC: xlnx: Use platform_get_irq() to get the interrupt ASoC: bcm: Use platform_get_irq() to get the interrupt
sound/soc/bcm/bcm63xx-i2s.h | 1 - sound/soc/bcm/bcm63xx-pcm-whistler.c | 13 ++++++------- sound/soc/xilinx/xlnx_spdif.c | 10 +++------- 3 files changed, 9 insertions(+), 15 deletions(-)
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining.
In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq().
Signed-off-by: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com --- v1->v2 * No change --- sound/soc/xilinx/xlnx_spdif.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/sound/soc/xilinx/xlnx_spdif.c b/sound/soc/xilinx/xlnx_spdif.c index e2ca087adee6..cba0e868a7d7 100644 --- a/sound/soc/xilinx/xlnx_spdif.c +++ b/sound/soc/xilinx/xlnx_spdif.c @@ -237,7 +237,6 @@ MODULE_DEVICE_TABLE(of, xlnx_spdif_of_match); static int xlnx_spdif_probe(struct platform_device *pdev) { int ret; - struct resource *res; struct snd_soc_dai_driver *dai_drv; struct spdif_dev_data *ctx;
@@ -273,13 +272,10 @@ static int xlnx_spdif_probe(struct platform_device *pdev) if (ctx->mode) { dai_drv = &xlnx_spdif_tx_dai; } else { - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_err(dev, "No IRQ resource found\n"); - ret = -ENODEV; + ret = platform_get_irq(pdev, 0); + if (ret < 0) goto clk_err; - } - ret = devm_request_irq(dev, res->start, + ret = devm_request_irq(dev, ret, xlnx_spdifrx_irq_handler, 0, "XLNX_SPDIF_RX", ctx); if (ret) {
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining.
In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq().
While at it also drop "r_irq" member from struct bcm_i2s_priv as there are no users of it.
Signed-off-by: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com Reviewed-by: Florian Fainelli f.fainelli@gmail.com --- v1->v2 * Included RB tag from Florian * Included irq.h to fix builds for x86 --- sound/soc/bcm/bcm63xx-i2s.h | 1 - sound/soc/bcm/bcm63xx-pcm-whistler.c | 13 ++++++------- 2 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/sound/soc/bcm/bcm63xx-i2s.h b/sound/soc/bcm/bcm63xx-i2s.h index edc328ba53d3..f30556bec89e 100644 --- a/sound/soc/bcm/bcm63xx-i2s.h +++ b/sound/soc/bcm/bcm63xx-i2s.h @@ -74,7 +74,6 @@
struct bcm_i2s_priv { struct device *dev; - struct resource *r_irq; struct regmap *regmap_i2s; struct clk *i2s_clk; struct snd_pcm_substream *play_substream; diff --git a/sound/soc/bcm/bcm63xx-pcm-whistler.c b/sound/soc/bcm/bcm63xx-pcm-whistler.c index b5096f64c576..2c600b017524 100644 --- a/sound/soc/bcm/bcm63xx-pcm-whistler.c +++ b/sound/soc/bcm/bcm63xx-pcm-whistler.c @@ -6,6 +6,7 @@
#include <linux/dma-mapping.h> #include <linux/io.h> +#include <linux/irq.h> #include <linux/module.h> #include <sound/pcm_params.h> #include <linux/regmap.h> @@ -387,14 +388,12 @@ int bcm63xx_soc_platform_probe(struct platform_device *pdev, { int ret;
- i2s_priv->r_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!i2s_priv->r_irq) { - dev_err(&pdev->dev, "Unable to get register irq resource.\n"); - return -ENODEV; - } + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret;
- ret = devm_request_irq(&pdev->dev, i2s_priv->r_irq->start, i2s_dma_isr, - i2s_priv->r_irq->flags, "i2s_dma", (void *)i2s_priv); + ret = devm_request_irq(&pdev->dev, ret, i2s_dma_isr, + irq_get_trigger_type(ret), "i2s_dma", (void *)i2s_priv); if (ret) { dev_err(&pdev->dev, "i2s_init: failed to request interrupt.ret=%d\n", ret);
On Tue, 21 Dec 2021 17:00:58 +0000, Lad Prabhakar wrote:
This patch series aims to drop using platform_get_resource() for IRQ types in preparation for removal of static setup of IRQ resource from DT core code.
Dropping usage of platform_get_resource() was agreed based on the discussion [0].
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/2] ASoC: xlnx: Use platform_get_irq() to get the interrupt commit: c2efaf8f2d53ffa2ecc487e21c62d13bbb8d88c3 [2/2] ASoC: bcm: Use platform_get_irq() to get the interrupt commit: 5de035c270047e7ae754fbfb69031707aa5b54f7
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (2)
-
Lad Prabhakar -
Mark Brown