This driver includes the legacy GPIO APIs <linux/gpio.h> and <linux/of_gpio.h> but does not use any symbols from any of them. Drop the includes. Further the driver is requesting "reset-gpios" rather than just "reset" from the GPIO framework. This is wrong because the gpiolib core will add "-gpios" before processing the request from e.g. device tree. Drop the suffix. The last problem means that the optional RESET GPIO has never been properly retrieved and used even if it existed, but nobody noticed. Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.") Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- sound/soc/codecs/cs35l33.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/sound/soc/codecs/cs35l33.c b/sound/soc/codecs/cs35l33.c index 4010a2d33a33..a19a2bafb37c 100644 --- a/sound/soc/codecs/cs35l33.c +++ b/sound/soc/codecs/cs35l33.c @@ -22,13 +22,11 @@ #include <sound/soc-dapm.h> #include <sound/initval.h> #include <sound/tlv.h> -#include <linux/gpio.h> #include <linux/gpio/consumer.h> #include <sound/cs35l33.h> #include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> #include <linux/regulator/machine.h> -#include <linux/of_gpio.h> #include <linux/of.h> #include "cs35l33.h" @@ -1165,7 +1163,7 @@ static int cs35l33_i2c_probe(struct i2c_client *i2c_client) /* We could issue !RST or skip it based on AMP topology */ cs35l33->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev, - "reset-gpios", GPIOD_OUT_HIGH); + "reset", GPIOD_OUT_HIGH); if (IS_ERR(cs35l33->reset_gpio)) { dev_err(&i2c_client->dev, "%s ERROR: Can't get reset GPIO\n", __func__); -- 2.34.1

This driver includes the legacy GPIO APIs <linux/gpio.h> and <linux/of_gpio.h> but does not use any symbols from any of them. Drop the includes. Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- sound/soc/codecs/cs35l35.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/codecs/cs35l35.c b/sound/soc/codecs/cs35l35.c index 63a538f747d3..ddb7d63213a3 100644 --- a/sound/soc/codecs/cs35l35.c +++ b/sound/soc/codecs/cs35l35.c @@ -18,14 +18,12 @@ #include <linux/regulator/consumer.h> #include <linux/gpio/consumer.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/regmap.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/soc-dapm.h> -#include <linux/gpio.h> #include <sound/initval.h> #include <sound/tlv.h> #include <sound/cs35l35.h> -- 2.34.1

This converts the Cirrus CS4271 ASoC codec driver to use GPIO descriptors. It turns out that there are two in-kernel users of the platform data passing mechanism so these are switched over as well. One locally defined GPIO "gpio_disabled" is declared in the state struct but completely unused in the driver, so we delete it. Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- NB: the affected platform EP93xx is being converted to device tree I don't know if that is happening in this merge window, but the colission should be manageable. --- arch/arm/mach-ep93xx/edb93xx.c | 32 +++++++++++++++++++++++++---- arch/arm/mach-ep93xx/vision_ep9307.c | 12 ++++++++++- include/sound/cs4271.h | 1 - sound/soc/codecs/cs4271.c | 39 ++++++++++++------------------------ 4 files changed, 52 insertions(+), 32 deletions(-) diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 4b90899a66e9..dbdb822a0100 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -88,7 +88,7 @@ static void __init edb93xx_register_i2c(void) * EDB93xx SPI peripheral handling *************************************************************************/ static struct cs4271_platform_data edb93xx_cs4271_data = { - .gpio_nreset = -EINVAL, /* filled in later */ + /* Intentionally left blank */ }; static struct spi_board_info edb93xx_spi_board_info[] __initdata = { @@ -114,14 +114,38 @@ static struct ep93xx_spi_info edb93xx_spi_info __initdata = { /* Intentionally left blank */ }; +static struct gpiod_lookup_table edb93xx_cs4272_edb9301_gpio_table = { + .dev_id = "spi0.0", /* CS0 on SPI0 */ + .table = { + GPIO_LOOKUP("A", 1, "reset", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table edb93xx_cs4272_edb9302_gpio_table = { + .dev_id = "spi0.0", /* CS0 on SPI0 */ + .table = { + GPIO_LOOKUP("H", 2, "reset", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table edb93xx_cs4272_edb9315_gpio_table = { + .dev_id = "spi0.0", /* CS0 on SPI0 */ + .table = { + GPIO_LOOKUP("B", 6, "reset", GPIO_ACTIVE_LOW), + { }, + }, +}; + static void __init edb93xx_register_spi(void) { if (machine_is_edb9301() || machine_is_edb9302()) - edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1; + gpiod_add_lookup_table(&edb93xx_cs4272_edb9301_gpio_table); else if (machine_is_edb9302a() || machine_is_edb9307a()) - edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2); + gpiod_add_lookup_table(&edb93xx_cs4272_edb9302_gpio_table); else if (machine_is_edb9315a()) - edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14; + gpiod_add_lookup_table(&edb93xx_cs4272_edb9315_gpio_table); gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table); ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info, diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 30d9cf3791eb..9471938df64c 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -164,7 +164,7 @@ static struct i2c_board_info vision_i2c_info[] __initdata = { * SPI CS4271 Audio Codec *************************************************************************/ static struct cs4271_platform_data vision_cs4271_data = { - .gpio_nreset = EP93XX_GPIO_LINE_H(2), + /* Intentionally left blank */ }; /************************************************************************* @@ -241,6 +241,15 @@ static struct spi_board_info vision_spi_board_info[] __initdata = { }, }; +static struct gpiod_lookup_table vision_spi_cs4271_gpio_table = { + .dev_id = "spi0.0", /* cs4271 @ CS0 */ + .table = { + /* RESET */ + GPIO_LOOKUP_IDX("H", 2, NULL, 0, GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct gpiod_lookup_table vision_spi_cs_gpio_table = { .dev_id = "spi0", .table = { @@ -292,6 +301,7 @@ static void __init vision_init_machine(void) ep93xx_register_i2c(vision_i2c_info, ARRAY_SIZE(vision_i2c_info)); + gpiod_add_lookup_table(&vision_spi_cs4271_gpio_table); gpiod_add_lookup_table(&vision_spi_mmc_gpio_table); gpiod_add_lookup_table(&vision_spi_cs_gpio_table); ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, diff --git a/include/sound/cs4271.h b/include/sound/cs4271.h index 6ff23ab48894..5a55d135bdea 100644 --- a/include/sound/cs4271.h +++ b/include/sound/cs4271.h @@ -9,7 +9,6 @@ #define __CS4271_H struct cs4271_platform_data { - int gpio_nreset; /* GPIO driving Reset pin, if any */ bool amutec_eq_bmutec; /* flag to enable AMUTEC=BMUTEC */ /* diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c index 9e6f8a048dd5..74a84832d958 100644 --- a/sound/soc/codecs/cs4271.c +++ b/sound/soc/codecs/cs4271.c @@ -13,9 +13,8 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/regulator/consumer.h> #include <sound/pcm.h> #include <sound/soc.h> @@ -160,9 +159,7 @@ struct cs4271_private { /* Current sample rate for de-emphasis control */ int rate; /* GPIO driving Reset pin, if any */ - int gpio_nreset; - /* GPIO that disable serial bus, if any */ - int gpio_disable; + struct gpio_desc *reset; /* enable soft reset workaround */ bool enable_soft_reset; struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; @@ -487,12 +484,10 @@ static int cs4271_reset(struct snd_soc_component *component) { struct cs4271_private *cs4271 = snd_soc_component_get_drvdata(component); - if (gpio_is_valid(cs4271->gpio_nreset)) { - gpio_direction_output(cs4271->gpio_nreset, 0); - mdelay(1); - gpio_set_value(cs4271->gpio_nreset, 1); - mdelay(1); - } + gpiod_direction_output(cs4271->reset, 1); + mdelay(1); + gpiod_set_value(cs4271->reset, 0); + mdelay(1); return 0; } @@ -612,9 +607,8 @@ static void cs4271_component_remove(struct snd_soc_component *component) { struct cs4271_private *cs4271 = snd_soc_component_get_drvdata(component); - if (gpio_is_valid(cs4271->gpio_nreset)) - /* Set codec to the reset state */ - gpio_set_value(cs4271->gpio_nreset, 0); + /* Set codec to the reset state */ + gpiod_set_value(cs4271->reset, 1); regcache_mark_dirty(cs4271->regmap); regulator_bulk_disable(ARRAY_SIZE(cs4271->supplies), cs4271->supplies); @@ -639,7 +633,6 @@ static const struct snd_soc_component_driver soc_component_dev_cs4271 = { static int cs4271_common_probe(struct device *dev, struct cs4271_private **c) { - struct cs4271_platform_data *cs4271plat = dev->platform_data; struct cs4271_private *cs4271; int i, ret; @@ -647,17 +640,11 @@ static int cs4271_common_probe(struct device *dev, if (!cs4271) return -ENOMEM; - cs4271->gpio_nreset = of_get_named_gpio(dev->of_node, "reset-gpio", 0); - - if (cs4271plat) - cs4271->gpio_nreset = cs4271plat->gpio_nreset; - - if (gpio_is_valid(cs4271->gpio_nreset)) { - ret = devm_gpio_request(dev, cs4271->gpio_nreset, - "CS4271 Reset"); - if (ret < 0) - return ret; - } + cs4271->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS); + if (IS_ERR(cs4271->reset)) + return dev_err_probe(dev, PTR_ERR(cs4271->reset), + "error retrieveing RESET GPIO\n"); + gpiod_set_consumer_name(cs4271->reset, "CS4271 Reset"); for (i = 0; i < ARRAY_SIZE(supply_names); i++) cs4271->supplies[i].supply = supply_names[i]; -- 2.34.1

This driver includes the legacy GPIO API <linux/gpio.h> but does not use any symbols from it. Drop the include. Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- sound/soc/codecs/cs42l42.c | 1 - sound/soc/codecs/cs42l42.h | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index 94bcab812629..2d11c5125f73 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -15,7 +15,6 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/gpio.h> #include <linux/regmap.h> #include <linux/slab.h> #include <linux/acpi.h> diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h index 7785125b73ab..3d85ebc59489 100644 --- a/sound/soc/codecs/cs42l42.h +++ b/sound/soc/codecs/cs42l42.h @@ -14,7 +14,7 @@ #include <dt-bindings/sound/cs42l42.h> #include <linux/device.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/mutex.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> -- 2.34.1

This driver includes the legacy GPIO API <linux/gpio.h> but does not use any symbols from it. Drop the include. Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- sound/soc/codecs/cs4349.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/codecs/cs4349.c b/sound/soc/codecs/cs4349.c index 9083228495d4..ca8f21aa4837 100644 --- a/sound/soc/codecs/cs4349.c +++ b/sound/soc/codecs/cs4349.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/gpio.h> #include <linux/gpio/consumer.h> #include <linux/platform_device.h> #include <linux/pm.h> -- 2.34.1