The DC servo codes are actually signed numbers so need to be treated as such.

Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/wm_hubs.c | 15 +++++++-------- 1 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index c466982..613df5d 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -91,6 +91,7 @@ static void wait_for_dc_servo(struct snd_soc_codec *codec, unsigned int op) static void calibrate_dc_servo(struct snd_soc_codec *codec) { struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); + s8 offset; u16 reg, reg_l, reg_r, dcs_cfg;

/* If we're using a digital only path and have a previously @@ -149,16 +150,14 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) hubs->dcs_codes);

/* HPOUT1L */ - if (reg_l + hubs->dcs_codes > 0 && - reg_l + hubs->dcs_codes < 0xff) - reg_l += hubs->dcs_codes; - dcs_cfg = reg_l << WM8993_DCS_DAC_WR_VAL_1_SHIFT; + offset = reg_l; + offset += hubs->dcs_codes; + dcs_cfg = (u8)offset << WM8993_DCS_DAC_WR_VAL_1_SHIFT;

/* HPOUT1R */ - if (reg_r + hubs->dcs_codes > 0 && - reg_r + hubs->dcs_codes < 0xff) - reg_r += hubs->dcs_codes; - dcs_cfg |= reg_r; + offset = reg_r; + offset += hubs->dcs_codes; + dcs_cfg |= (u8)offset;

dev_dbg(codec->dev, "DCS result: %x\n", dcs_cfg);