Sir, If you have, can you please send me the o/p of this comand,

$ls -lh /dev/snd/

Thank you..

On Thu, Sep 11, 2008 at 2:00 PM, dinesh dinesh.dua@coraltele.com wrote:

Hi, As per ur proc enteries you havn't registered any capture device so u can not do recording with ur device.

-----Original Message----- *From*: vasudha rao <vasudha.jrao@gmail.com<vasudha%20rao%20%3cvasudha.jrao@gmail.com%3e>

...

*To*: aggarwal <anuj.aggarwal@gmail.com<aggarwal%20%3canuj.aggarwal@gmail.com%3e>

...

*Cc*: alsa-devel@alsa-project.org *Subject*: [alsa-devel] aplay not working *Date*: Thu, 11 Sep 2008 13:33:10 +0530

Hi ,

I am not able to do audio record also..

I tried following commands..

$arecord RIFF$��.WAVEfmt ...@.@.data��.Recording WAVE 'stdout' : Unsigned 8 bit, Rate 8000 Hz, Mono arecord: xrun:1037: read/write error, state = PREPARED

$aplay -l **** List of PLAYBACK Hardware Devices **** card 0: AC97 [Atmel AC97], device 0: Atmel AC97 [Atmel AC97] Subdevices: 1/1 Subdevice #0: subdevice #0

$aplay aplay: main:508: audio open error: Inappropriate ioctl for device

$cat /proc/asound/cards 0 [AC97 ]: ac97c - Atmel AC97 Atmel AC97 Controller at 0xfffa0000, irq 18

$cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).

$cat /proc/asound/devices 2: : timer 3: : sequencer 4: [ 0- 0]: digital audio playback 5: [ 0] : control

Where I am doing wrong..

Thank you.. _______________________________________________ Alsa-devel mailing listAlsa-devel@alsa-project.orghttp://mailman.alsa-project.org/mailman/listinfo/alsa-devel