From: Mark Brown broonie@linaro.org

The driver supports a range of devices but currently doesn't allow those device names to be used for enumeration on DT. Add the currently listed I2C IDs as compatible strings.

Signed-off-by: Mark Brown broonie@linaro.org --- Documentation/devicetree/bindings/sound/tlv320aic3x.txt | 8 +++++++- sound/soc/codecs/tlv320aic3x.c | 2 ++ 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt index f47c3f5..26f65f9 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt @@ -3,7 +3,13 @@ Texas Instruments - tlv320aic3x Codec module The tlv320aic3x serial control bus communicates through I2C protocols

Required properties: -- compatible - "string" - "ti,tlv320aic3x" + +- compatible - "string" - One of: + "ti,tlv320aic3x" - Generic TLV320AIC3x device + "ti,tlv320aic33" - TLV320AIC33 + "ti,tlv320aic3007" - TLV320AIC3007 + + - reg - <int> - I2C slave address

diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index e5b9268..c9bb760 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1582,6 +1582,8 @@ static int aic3x_i2c_remove(struct i2c_client *client) #if defined(CONFIG_OF) static const struct of_device_id tlv320aic3x_of_match[] = { { .compatible = "ti,tlv320aic3x", }, + { .compatible = "ti,tlv320aic33" }, + { .compatible = "ti,tlv320aic3007" }, {}, }; MODULE_DEVICE_TABLE(of, tlv320aic3x_of_match);