Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll.

Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level.

Signed-off-by: Zidan Wang zidan.wang@freescale.com --- sound/soc/codecs/wm8960.c | 220 +++++++++++++++++++++++++++++++++++++--------- sound/soc/codecs/wm8960.h | 1 + 2 files changed, 180 insertions(+), 41 deletions(-)

diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 1ed0720..e7ee49a 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -48,6 +48,9 @@ #define WM8960_DISOP 0x40 #define WM8960_DRES_MASK 0x30

+static bool is_pll_freq_available(unsigned int source, unsigned int target); +static int wm8960_set_pll(struct snd_soc_codec *codec, + unsigned int freq_in, unsigned int freq_out); /* * wm8960 register cache * We can't read the WM8960 register space when we are @@ -126,9 +129,12 @@ struct wm8960_priv { struct snd_soc_dapm_widget *rout1; struct snd_soc_dapm_widget *out3; bool deemph; - int playback_fs; + int lrclk; int bclk; int sysclk; + int clk_id; + int freq_in; + bool is_stream_in_use[2]; struct wm8960_data pdata; };

@@ -164,8 +170,8 @@ static int wm8960_set_deemph(struct snd_soc_codec *codec) if (wm8960->deemph) { best = 1; for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) { - if (abs(deemph_settings[i] - wm8960->playback_fs) < - abs(deemph_settings[best] - wm8960->playback_fs)) + if (abs(deemph_settings[i] - wm8960->lrclk) < + abs(deemph_settings[best] - wm8960->lrclk)) best = i; }

@@ -565,6 +571,9 @@ static struct { { 8000, 5 }, };

+/* -1 for reserved value */ +static const int sysclk_divs[] = { 1, -1, 2, -1 }; + /* Multiply 256 for internal 256 div */ static const int dac_divs[] = { 256, 384, 512, 768, 1024, 1408, 1536 };

@@ -574,61 +583,110 @@ static const int bclk_divs[] = { 120, 160, 220, 240, 320, 320, 320 };

-static void wm8960_configure_clocking(struct snd_soc_codec *codec, - bool tx, int lrclk) +static int wm8960_configure_clocking(struct snd_soc_codec *codec) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + int sysclk, bclk, lrclk, freq_out, freq_in; u16 iface1 = snd_soc_read(codec, WM8960_IFACE1); - u16 iface2 = snd_soc_read(codec, WM8960_IFACE2); - u32 sysclk; - int i, j; + int i, j, k;

if (!(iface1 & (1<<6))) { dev_dbg(codec->dev, "Codec is slave mode, no need to configure clock\n"); - return; + return 0; + } + + if (wm8960->clk_id != WM8960_SYSCLK_MCLK && !wm8960->freq_in) { + dev_err(codec->dev, "No MCLK configured\n"); + return -EINVAL; }

- if (!wm8960->sysclk) { - dev_dbg(codec->dev, "No SYSCLK configured\n"); - return; + freq_in = wm8960->freq_in; + bclk = wm8960->bclk; + lrclk = wm8960->lrclk; + /* + * If it's sysclk auto mode, check if the MCLK can provide sysclk or + * not. If MCLK can provide sysclk, using MCLK to provide sysclk + * directly. Otherwise, auto select a available pll out frequency + * and set PLL. + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO) { + /* disable the PLL and using MCLK to provide sysclk */ + wm8960_set_pll(codec, 0, 0); + freq_out = freq_in; + } else if (wm8960->sysclk) { + freq_out = wm8960->sysclk; + } else { + dev_err(codec->dev, "No SYSCLK configured\n"); + return -EINVAL; }

- if (!wm8960->bclk || !lrclk) { - dev_dbg(codec->dev, "No audio clocks configured\n"); - return; + /* check if the sysclk frequency is available. */ + for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) { + if (sysclk_divs[i] == -1) + continue; + sysclk = freq_out / sysclk_divs[i]; + for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) { + if (sysclk == dac_divs[j] * lrclk) { + for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) + if (sysclk == bclk * bclk_divs[k] / 10) + break; + if (k != ARRAY_SIZE(bclk_divs)) + break; + } + } + if (j != ARRAY_SIZE(dac_divs)) + break; }

- for (i = 0; i < ARRAY_SIZE(dac_divs); ++i) { - if (wm8960->sysclk == lrclk * dac_divs[i]) { - for (j = 0; j < ARRAY_SIZE(bclk_divs); ++j) { - sysclk = wm8960->bclk * bclk_divs[j] / 10; - if (wm8960->sysclk == sysclk) + if (i != ARRAY_SIZE(sysclk_divs)) { + goto configure_clock; + } else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) { + dev_err(codec->dev, "failed to configure clock\n"); + return -EINVAL; + } + /* get a available pll out frequency and set pll */ + for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) { + if (sysclk_divs[i] == -1) + continue; + for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) { + sysclk = lrclk * dac_divs[j]; + freq_out = sysclk * sysclk_divs[i]; + + for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) { + if (sysclk == bclk * bclk_divs[k] / 10 && + is_pll_freq_available(freq_in, freq_out)) { + wm8960_set_pll(codec, + freq_in, freq_out); break; + } else { + continue; + } } - if(j != ARRAY_SIZE(bclk_divs)) + if (k != ARRAY_SIZE(bclk_divs)) break; } + if (j != ARRAY_SIZE(dac_divs)) + break; }

- if (i == ARRAY_SIZE(dac_divs)) { - dev_err(codec->dev, "Unsupported sysclk %d\n", wm8960->sysclk); - return; + if (i == ARRAY_SIZE(sysclk_divs)) { + dev_err(codec->dev, "failed to configure clock\n"); + return -EINVAL; }

- /* - * configure frame clock. If ADCLRC configure as GPIO pin, DACLRC - * pin is used as a frame clock for ADCs and DACs. - */ - if (iface2 & (1<<6)) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, i << 3); - else if (tx) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, i << 3); - else if (!tx) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 6, i << 6); +configure_clock: + /* configure sysclk clock */ + snd_soc_update_bits(codec, WM8960_CLOCK1, 3 << 1, i << 1); + + /* configure frame clock */ + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, j << 3); + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 6, j << 6);

/* configure bit clock */ - snd_soc_update_bits(codec, WM8960_CLOCK2, 0xf, j); + snd_soc_update_bits(codec, WM8960_CLOCK2, 0xf, k); + + return 0; }

static int wm8960_hw_params(struct snd_pcm_substream *substream, @@ -667,9 +725,9 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream, return -EINVAL; }

+ wm8960->lrclk = params_rate(params); /* Update filters for the new rate */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - wm8960->playback_fs = params_rate(params); + if (tx) { wm8960_set_deemph(codec); } else { for (i = 0; i < ARRAY_SIZE(alc_rates); i++) @@ -682,7 +740,23 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream, /* set iface */ snd_soc_write(codec, WM8960_IFACE1, iface);

- wm8960_configure_clocking(codec, tx, params_rate(params)); + wm8960->is_stream_in_use[tx] = true; + + if (codec->dapm.bias_level == SND_SOC_BIAS_ON && + !wm8960->is_stream_in_use[!tx]) + return wm8960_configure_clocking(codec); + + return 0; +} + +static int wm8960_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; + + wm8960->is_stream_in_use[tx] = false;

return 0; } @@ -702,6 +776,7 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + u16 pm2 = snd_soc_read(codec, WM8960_POWER2); int ret;

switch (level) { @@ -721,11 +796,22 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, } }

+ ret = wm8960_configure_clocking(codec); + if (ret) + return ret; + /* Set VMID to 2x50k */ snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); break;

case SND_SOC_BIAS_ON: + /* + * If it's sysclk auto mode, and the pll is enabled, + * disable the pll + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1)) + wm8960_set_pll(codec, 0, 0); + if (!IS_ERR(wm8960->mclk)) clk_disable_unprepare(wm8960->mclk); break; @@ -780,6 +866,7 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + u16 pm2 = snd_soc_read(codec, WM8960_POWER2); int reg, ret;

switch (level) { @@ -831,9 +918,21 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, return ret; } } + + ret = wm8960_configure_clocking(codec); + if (ret) + return ret; + break;

case SND_SOC_BIAS_ON: + /* + * If it's sysclk auto mode, and the pll is enabled, + * disable the pll + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1)) + wm8960_set_pll(codec, 0, 0); + if (!IS_ERR(wm8960->mclk)) clk_disable_unprepare(wm8960->mclk);

@@ -892,6 +991,28 @@ struct _pll_div { u32 k:24; };

+static bool is_pll_freq_available(unsigned int source, unsigned int target) +{ + unsigned int Ndiv; + + if (source == 0 || target == 0) + return false; + + /* Scale up target to PLL operating frequency */ + target *= 4; + Ndiv = target / source; + + if (Ndiv < 6) { + source >>= 1; + Ndiv = target / source; + } + + if ((Ndiv < 6) || (Ndiv > 12)) + return false; + + return true; +} + /* The size in bits of the pll divide multiplied by 10 * to allow rounding later */ #define FIXED_PLL_SIZE ((1 << 24) * 10) @@ -943,10 +1064,9 @@ static int pll_factors(unsigned int source, unsigned int target, return 0; }

-static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, - int source, unsigned int freq_in, unsigned int freq_out) +static int wm8960_set_pll(struct snd_soc_codec *codec, + unsigned int freq_in, unsigned int freq_out) { - struct snd_soc_codec *codec = codec_dai->codec; u16 reg; static struct _pll_div pll_div; int ret; @@ -986,6 +1106,20 @@ static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, return 0; }

+static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, + int source, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + + wm8960->freq_in = freq_in; + + if (pll_id == WM8960_SYSCLK_AUTO) + return 0; + + return wm8960_set_pll(codec, freq_in, freq_out); +} + static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai, int div_id, int div) { @@ -1043,11 +1177,14 @@ static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, snd_soc_update_bits(codec, WM8960_CLOCK1, 0x1, WM8960_SYSCLK_PLL); break; + case WM8960_SYSCLK_AUTO: + break; default: return -EINVAL; }

wm8960->sysclk = freq; + wm8960->clk_id = clk_id;

return 0; } @@ -1060,6 +1197,7 @@ static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,

static const struct snd_soc_dai_ops wm8960_dai_ops = { .hw_params = wm8960_hw_params, + .hw_free = wm8960_hw_free, .digital_mute = wm8960_mute, .set_fmt = wm8960_set_dai_fmt, .set_clkdiv = wm8960_set_dai_clkdiv, diff --git a/sound/soc/codecs/wm8960.h b/sound/soc/codecs/wm8960.h index 2d8163d..ab3220d 100644 --- a/sound/soc/codecs/wm8960.h +++ b/sound/soc/codecs/wm8960.h @@ -82,6 +82,7 @@

#define WM8960_SYSCLK_MCLK (0 << 0) #define WM8960_SYSCLK_PLL (1 << 0) +#define WM8960_SYSCLK_AUTO (2 << 0)

#define WM8960_DAC_DIV_1 (0 << 3) #define WM8960_DAC_DIV_1_5 (1 << 3)