[alsa-devel] [PATCH 0/5] Adding OMAP DMIC driver to kernel
This is a patch series to add the OMAP Digital Microphone driver for OMAP4.
It includes the driver, a generic DMIC codec, platform devices, as well as HWMOD entries for OMAP44xx chipsets.
David Lambert (5): ASoC: DMIC: Adding the OMAP DMIC driver ASoC: DMIC codec: Adding a generic DMIC codec ASoC: DMIC: Adding OMAP DMIC driver to build OMAP4: hwmod: add entries for DMIC driver MAP4: DMIC: Add DMIC codec platform devices
arch/arm/mach-omap2/board-4430sdp.c | 11 + arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 91 +++++ arch/arm/plat-omap/devices.c | 35 ++ arch/arm/plat-omap/include/plat/dmic.h | 83 ++++ sound/soc/codecs/Kconfig | 3 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/dmic.c | 79 ++++ sound/soc/omap/Kconfig | 5 + sound/soc/omap/Makefile | 2 + sound/soc/omap/omap-dmic.c | 596 ++++++++++++++++++++++++++++ sound/soc/omap/omap-dmic.h | 38 ++ 11 files changed, 945 insertions(+), 0 deletions(-) create mode 100644 arch/arm/plat-omap/include/plat/dmic.h create mode 100644 sound/soc/codecs/dmic.c create mode 100644 sound/soc/omap/omap-dmic.c create mode 100644 sound/soc/omap/omap-dmic.h
This patch adds support for the OMAP4 digital microphone DAI.
This DAI can support support recording in 2, 4, or 6 channels
When provided with a 19.2Mhz functional clock, can encode at 96Khz or 192Khz (all channels must have the same sample rate).
Details of the hardware interface can be found in the OMAP4 TRM in Section 23.7
Signed-off-by: David Lambert dlambert@ti.com --- arch/arm/plat-omap/include/plat/dmic.h | 83 +++++ sound/soc/omap/omap-dmic.c | 596 ++++++++++++++++++++++++++++++++ sound/soc/omap/omap-dmic.h | 38 ++ 3 files changed, 717 insertions(+), 0 deletions(-) create mode 100644 arch/arm/plat-omap/include/plat/dmic.h create mode 100644 sound/soc/omap/omap-dmic.c create mode 100644 sound/soc/omap/omap-dmic.h
diff --git a/arch/arm/plat-omap/include/plat/dmic.h b/arch/arm/plat-omap/include/plat/dmic.h new file mode 100644 index 0000000..8a988bf --- /dev/null +++ b/arch/arm/plat-omap/include/plat/dmic.h @@ -0,0 +1,83 @@ +/* + * omap-dmic.h -- OMAP Digital Microphone Controller + * + * Author: Liam Girdwood lrg@slimlogic.co.uk + * David Lambert dlambert@ti.com + * Misael Lopez Cruz misael.lopez@ti.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_DMIC_H +#define __ASM_ARCH_OMAP_DMIC_H + +#define OMAP44XX_DMIC_L3_BASE 0x4902e000 + +#define OMAP_DMIC_REVISION 0x00 +#define OMAP_DMIC_SYSCONFIG 0x10 +#define OMAP_DMIC_IRQSTATUS_RAW 0x24 +#define OMAP_DMIC_IRQSTATUS 0x28 +#define OMAP_DMIC_IRQENABLE_SET 0x2C +#define OMAP_DMIC_IRQENABLE_CLR 0x30 +#define OMAP_DMIC_IRQWAKE_EN 0x34 +#define OMAP_DMIC_DMAENABLE_SET 0x38 +#define OMAP_DMIC_DMAENABLE_CLR 0x3C +#define OMAP_DMIC_DMAWAKEEN 0x40 +#define OMAP_DMIC_CTRL 0x44 +#define OMAP_DMIC_DATA 0x48 +#define OMAP_DMIC_FIFO_CTRL 0x4C +#define OMAP_DMIC_FIFO_DMIC1R_DATA 0x50 +#define OMAP_DMIC_FIFO_DMIC1L_DATA 0x54 +#define OMAP_DMIC_FIFO_DMIC2R_DATA 0x58 +#define OMAP_DMIC_FIFO_DMIC2L_DATA 0x5C +#define OMAP_DMIC_FIFO_DMIC3R_DATA 0x60 +#define OMAP_DMIC_FIFO_DMIC3L_DATA 0x64 + +/* + * DMIC_IRQ bit fields + * IRQSTATUS_RAW, IRQSTATUS, IRQENABLE_SET, IRQENABLE_CLR + */ + +#define OMAP_DMIC_IRQ (1 << 0) +#define OMAP_DMIC_IRQ_FULL (1 << 1) +#define OMAP_DMIC_IRQ_ALMST_EMPTY (1 << 2) +#define OMAP_DMIC_IRQ_EMPTY (1 << 3) +#define OMAP_DMIC_IRQ_MASK 0x07 + +/* + * DMIC_DMAENABLE bit fields + */ + +#define OMAP_DMIC_DMA_ENABLE 0x1 + +/* + * DMIC_CTRL bit fields + */ + +#define OMAP_DMIC_UP1_ENABLE 0x0001 +#define OMAP_DMIC_UP2_ENABLE 0x0002 +#define OMAP_DMIC_UP3_ENABLE 0x0004 +#define OMAP_DMIC_FORMAT 0x0008 +#define OMAP_DMIC_POLAR1 0x0010 +#define OMAP_DMIC_POLAR2 0x0020 +#define OMAP_DMIC_POLAR3 0x0040 +#define OMAP_DMIC_POLAR_MASK 0x0070 +#define OMAP_DMIC_CLK_DIV_SHIFT 7 +#define OMAP_DMIC_CLK_DIV_MASK 0x0380 +#define OMAP_DMIC_RESET 0x0400 + +#define OMAP_DMIC_ENABLE_MASK 0x007 + +#define OMAP_DMICOUTFORMAT_LJUST (0 << 3) +#define OMAP_DMICOUTFORMAT_RJUST (1 << 3) + +/* + * DMIC_FIFO_CTRL bit fields + */ + +#define OMAP_DMIC_THRES_MAX 0xF + + +#endif diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c new file mode 100644 index 0000000..6ba05bd --- /dev/null +++ b/sound/soc/omap/omap-dmic.c @@ -0,0 +1,596 @@ +/* + * omap-dmic.c -- OMAP ASoC DMIC DAI driver + * + * Copyright (C) 2010 Texas Instruments + * + * Author: Liam Girdwood lrg@slimlogic.co.uk + * David Lambert dlambert@ti.com + * Misael Lopez Cruz misael.lopez@ti.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#undef DEBUG + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/wait.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/pm_runtime.h> + +#include <plat/control.h> +#include <plat/dma.h> +#include <plat/dmic.h> +#include <plat/omap_hwmod.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include "omap-dmic.h" +#include "omap-pcm.h" + +#define OMAP_DMIC_RATES (SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000) +#define OMAP_DMIC_FORMATS SNDRV_PCM_FMTBIT_S32_LE + +struct omap_dmic { + struct device *dev; + void __iomem *io_base; + int irq; + int clk_freq; + int sysclk; + int active; + spinlock_t lock; + struct omap_dmic_link *link; +}; + +static struct omap_dmic_link omap_dmic_link = { + .irq_mask = OMAP_DMIC_IRQ_EMPTY | OMAP_DMIC_IRQ_FULL, + .threshold = 2, + .format = OMAP_DMICOUTFORMAT_LJUST, + .polar = OMAP_DMIC_POLAR1 | OMAP_DMIC_POLAR2 + | OMAP_DMIC_POLAR3, +}; + +/* + * Stream DMA parameters + */ +static struct omap_pcm_dma_data omap_dmic_dai_dma_params = { + .name = "DMIC capture", + .data_type = OMAP_DMA_DATA_TYPE_S32, + .sync_mode = OMAP_DMA_SYNC_PACKET, + .packet_size = 2, + .port_addr = OMAP44XX_DMIC_L3_BASE + OMAP_DMIC_DATA, +}; + + +static inline void omap_dmic_write(struct omap_dmic *dmic, + u16 reg, u32 val) +{ + __raw_writel(val, dmic->io_base + reg); +} + +static inline int omap_dmic_read(struct omap_dmic *dmic, u16 reg) +{ + return __raw_readl(dmic->io_base + reg); +} + +#ifdef DEBUG +static void omap_dmic_reg_dump(struct omap_dmic *dmic) +{ + dev_dbg(dmic->dev, "***********************\n"); + dev_dbg(dmic->dev, "OMAP_DMIC_IRQSTATUS_RAW: 0x%04x\n", + omap_dmic_read(dmic, OMAP_DMIC_IRQSTATUS_RAW)); + dev_dbg(dmic->dev, "OMAP_DMIC_IRQSTATUS: 0x%04x\n", + omap_dmic_read(dmic, OMAP_DMIC_IRQSTATUS)); + dev_dbg(dmic->dev, "OMAP_DMIC_IRQENABLE_SET: 0x%04x\n", + omap_dmic_read(dmic, OMAP_DMIC_IRQENABLE_SET)); + dev_dbg(dmic->dev, "OMAP_DMIC_IRQENABLE_CLR: 0x%04x\n", + omap_dmic_read(dmic, OMAP_DMIC_IRQENABLE_CLR)); + dev_dbg(dmic->dev, "OMAP_DMIC_IRQWAKE_EN: 0x%04x\n", + omap_dmic_read(dmic, OMAP_DMIC_IRQWAKE_EN)); + dev_dbg(dmic->dev, "OMAP_DMIC_DMAENABLE_SET: 0x%04x\n", + omap_dmic_read(dmic, OMAP_DMIC_DMAENABLE_SET)); + dev_dbg(dmic->dev, "OMAP_DMIC_DMAENABLE_CLR: 0x%04x\n", + omap_dmic_read(dmic, OMAP_DMIC_DMAENABLE_CLR)); + dev_dbg(dmic->dev, "OMAP_DMIC_DMAWAKEEN: 0x%04x\n", + omap_dmic_read(dmic, OMAP_DMIC_DMAWAKEEN)); + dev_dbg(dmic->dev, "OMAP_DMIC_CTRL: 0x%04x\n", + omap_dmic_read(dmic, OMAP_DMIC_CTRL)); + dev_dbg(dmic->dev, "OMAP_DMIC_DATA: 0x%04x\n", + omap_dmic_read(dmic, OMAP_DMIC_DATA)); + dev_dbg(dmic->dev, "OMAP_DMIC_FIFO_CTRL: 0x%04x\n", + omap_dmic_read(dmic, OMAP_DMIC_FIFO_CTRL)); + dev_dbg(dmic->dev, "OMAP_DMIC_FIFO_DMIC1R_DATA: 0x%08x\n", + omap_dmic_read(dmic, OMAP_DMIC_FIFO_DMIC1R_DATA)); + dev_dbg(dmic->dev, "OMAP_DMIC_FIFO_DMIC1L_DATA: 0x%08x\n", + omap_dmic_read(dmic, OMAP_DMIC_FIFO_DMIC1L_DATA)); + dev_dbg(dmic->dev, "OMAP_DMIC_FIFO_DMIC2R_DATA: 0x%08x\n", + omap_dmic_read(dmic, OMAP_DMIC_FIFO_DMIC2R_DATA)); + dev_dbg(dmic->dev, "OMAP_DMIC_FIFO_DMIC2L_DATA: 0x%08x\n", + omap_dmic_read(dmic, OMAP_DMIC_FIFO_DMIC2L_DATA)); + dev_dbg(dmic->dev, "OMAP_DMIC_FIFO_DMIC3R_DATA: 0x%08x\n", + omap_dmic_read(dmic, OMAP_DMIC_FIFO_DMIC3R_DATA)); + dev_dbg(dmic->dev, "OMAP_DMIC_FIFO_DMIC3L_DATA: 0x%08x\n", + omap_dmic_read(dmic, OMAP_DMIC_FIFO_DMIC3L_DATA)); + dev_dbg(dmic->dev, "***********************\n"); +} +#else +static void omap_dmic_reg_dump(struct omap_dmic *dmic) {} +#endif + +/* + * Enables the transfer through the DMIC interface + */ +static void omap_dmic_start(struct omap_dmic *dmic, int channels) +{ + u32 ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL); + omap_dmic_write(dmic, OMAP_DMIC_CTRL, ctrl | channels); + +} + +/* + * Disables the transfer through the DMIC interface + */ +static void omap_dmic_stop(struct omap_dmic *dmic, int channels) +{ + u32 ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL); + omap_dmic_write(dmic, OMAP_DMIC_CTRL, ctrl & ~channels); +} + +static int omap_dmic_set_clkdiv(struct snd_soc_dai *dai, + int div_id, int div) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + int ctrl, div_sel = -EINVAL; + + if (div_id != OMAP_DMIC_CLKDIV) + return -ENODEV; + + switch (dmic->clk_freq) { + case 19200000: + if (div == 5) + div_sel = 0x1; + else if (div == 8) + div_sel = 0x0; + break; + case 24000000: + if (div == 10) + div_sel = 0x2; + break; + case 24576000: + if (div == 8) + div_sel = 0x3; + else if (div == 16) + div_sel = 0x4; + break; + case 12000000: + if (div == 5) + div_sel = 0x5; + break; + default: + dev_err(dai->dev, "invalid freq %d\n", dmic->clk_freq); + return -EINVAL; + } + + if (div_sel < 0) { + dev_err(dai->dev, "divider not supported %d\n", div); + return -EINVAL; + } + + ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL) & ~OMAP_DMIC_CLK_DIV_MASK; + + omap_dmic_write(dmic, OMAP_DMIC_CTRL, + ctrl | (div_sel << OMAP_DMIC_CLK_DIV_SHIFT)); + + return 0; +} + +/* + * Configures DMIC for audio recording. + * This function should be called before omap_dmic_start. + */ +static int omap_dmic_open(struct omap_dmic *dmic) +{ + struct omap_dmic_link *link = dmic->link; + u32 ctrl; + + /* Enable irq request generation */ + omap_dmic_write(dmic, OMAP_DMIC_IRQENABLE_SET, + link->irq_mask & OMAP_DMIC_IRQ_MASK); + + /* Configure uplink threshold */ + if (link->threshold > OMAP_DMIC_THRES_MAX) + link->threshold = OMAP_DMIC_THRES_MAX; + + omap_dmic_write(dmic, OMAP_DMIC_FIFO_CTRL, link->threshold); + + /* Configure DMA controller */ + omap_dmic_write(dmic, OMAP_DMIC_DMAENABLE_SET, OMAP_DMIC_DMA_ENABLE); + + /* Set dmic out format */ + ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL) + & ~(OMAP_DMIC_FORMAT | OMAP_DMIC_POLAR_MASK); + omap_dmic_write(dmic, OMAP_DMIC_CTRL, + ctrl | link->format | link->polar); + + return 0; +} + +/* + * Cleans DMIC uplink configuration. + * This function should be called when the stream is closed. + */ +static int omap_dmic_close(struct omap_dmic *dmic) +{ + struct omap_dmic_link *link = dmic->link; + + /* Disable irq request generation */ + omap_dmic_write(dmic, OMAP_DMIC_IRQENABLE_CLR, + link->irq_mask & OMAP_DMIC_IRQ_MASK); + + /* Disable DMA request generation */ + omap_dmic_write(dmic, OMAP_DMIC_DMAENABLE_CLR, OMAP_DMIC_DMA_ENABLE); + + return 0; +} + +static irqreturn_t omap_dmic_irq_handler(int irq, void *dev_id) +{ + struct omap_dmic *dmic = dev_id; + u32 irq_status; + + irq_status = omap_dmic_read(dmic, OMAP_DMIC_IRQSTATUS); + + /* Acknowledge irq event */ + omap_dmic_write(dmic, OMAP_DMIC_IRQSTATUS, irq_status); + if (irq_status & OMAP_DMIC_IRQ_FULL) + dev_dbg(dmic->dev, "DMIC FIFO error %x\n", irq_status); + + if (irq_status & OMAP_DMIC_IRQ_EMPTY) + dev_dbg(dmic->dev, "DMIC FIFO error %x\n", irq_status); + + if (irq_status & OMAP_DMIC_IRQ) + dev_dbg(dmic->dev, "DMIC write request\n"); + + return IRQ_HANDLED; +} + +static int omap_dmic_dai_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + + if (!dmic->active++) + pm_runtime_get_sync(dmic->dev); + + return 0; +} + +static void omap_dmic_dai_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + + if (!--dmic->active) + pm_runtime_put_sync(dmic->dev); +} + +static int omap_dmic_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + struct omap_dmic_link *link = dmic->link; + int channels, rate, div; + int ret = 0; + + channels = params_channels(params); + switch (channels) { + case 6: + link->channels = OMAP_DMIC_UP1_ENABLE | OMAP_DMIC_UP2_ENABLE + | OMAP_DMIC_UP3_ENABLE; + break; + case 4: + link->channels = OMAP_DMIC_UP1_ENABLE | OMAP_DMIC_UP2_ENABLE; + break; + case 2: + link->channels = OMAP_DMIC_UP1_ENABLE; + break; + default: + dev_err(dmic->dev, "invalid number of channels\n"); + return -EINVAL; + } + + rate = params_rate(params); + switch (rate) { + case 192000: + div = 5; + break; + default: + div = 8; + } + + omap_dmic_set_clkdiv(dai, OMAP_DMIC_CLKDIV, div); + + omap_dmic_dai_dma_params.packet_size = link->threshold * channels; + snd_soc_dai_set_dma_data(dai, substream, &omap_dmic_dai_dma_params); + + if (dmic->active == 1) + ret = omap_dmic_open(dmic); + + return ret; +} + +static int omap_dmic_dai_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + struct omap_dmic_link *link = dmic->link; + int ret = 0; + + if (dmic->active == 1) { + ret = omap_dmic_close(dmic); + link->channels = 0; + } + + return ret; +} + +static int omap_dmic_dai_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + int dmic_id = dmic->link->channels; + + omap_dmic_reg_dump(dmic); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + omap_dmic_start(dmic, dmic_id); + break; + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + break; + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + break; + case SNDRV_PCM_TRIGGER_STOP: + omap_dmic_stop(dmic, dmic_id); + break; + default: + break; + } + + return 0; +} + +static int omap_dmic_set_dai_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, + int dir) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + struct clk *dmic_clk, *parent_clk; + int ret = 0; + + dmic_clk = clk_get(NULL, "dmic_fck"); + if (IS_ERR(dmic_clk)) + return -ENODEV; + + switch (clk_id) { + case OMAP_DMIC_SYSCLK_PAD_CLKS: + parent_clk = clk_get(NULL, "pad_clks_ck"); + if (IS_ERR(parent_clk)) { + ret = -ENODEV; + goto err_par; + } + break; + case OMAP_DMIC_SYSCLK_SLIMBLUS_CLKS: + parent_clk = clk_get(NULL, "slimbus_clk"); + if (IS_ERR(parent_clk)) { + ret = -ENODEV; + goto err_par; + } + break; + case OMAP_DMIC_SYSCLK_SYNC_MUX_CLKS: + parent_clk = clk_get(NULL, "dmic_sync_mux_ck"); + if (IS_ERR(parent_clk)) { + ret = -ENODEV; + goto err_par; + } + break; + default: + dev_err(dai->dev, "clk_id not supported %d\n", clk_id); + ret = -EINVAL; + goto err_par; + } + + switch (freq) { + case 19200000: + case 24000000: + case 24576000: + case 12000000: + dmic->clk_freq = freq; + break; + default: + dev_err(dai->dev, "clk freq not supported %d\n", freq); + ret = -EINVAL; + goto err_freq; + } + + if (dmic->sysclk != clk_id) { + /* reparent not allowed if a stream is ongoing */ + if (dmic->active > 1) { + ret = -EBUSY; + goto err_freq; + } + + /* disable clock while reparenting */ + if (dmic->active == 1) + pm_runtime_put_sync(dmic->dev); + + ret = clk_set_parent(dmic_clk, parent_clk); + + if (dmic->active == 1) + pm_runtime_get_sync(dmic->dev); + + dmic->sysclk = clk_id; + } + +err_freq: + clk_put(parent_clk); +err_par: + clk_put(dmic_clk); + + return ret; +} + +static struct snd_soc_dai_ops omap_dmic_dai_ops = { + .startup = omap_dmic_dai_startup, + .shutdown = omap_dmic_dai_shutdown, + .hw_params = omap_dmic_dai_hw_params, + .trigger = omap_dmic_dai_trigger, + .hw_free = omap_dmic_dai_hw_free, + .set_sysclk = omap_dmic_set_dai_sysclk, + .set_clkdiv = omap_dmic_set_clkdiv, +}; + +static struct snd_soc_dai_driver omap_dmic_dai = { + + .name = "omap-dmic-dai-0", + .capture = { + .channels_min = 2, + .channels_max = 6, + .rates = OMAP_DMIC_RATES, + .formats = OMAP_DMIC_FORMATS, + }, + .ops = &omap_dmic_dai_ops, +}; + +static __devinit int asoc_dmic_probe(struct platform_device *pdev) +{ + struct omap_dmic *dmic; + struct resource *res; + int ret; + + dmic = kzalloc(sizeof(struct omap_dmic), GFP_KERNEL); + if (!dmic) + return -ENOMEM; + + platform_set_drvdata(pdev, dmic); + dmic->dev = &pdev->dev; + dmic->link = &omap_dmic_link; + dmic->sysclk = OMAP_DMIC_SYSCLK_SYNC_MUX_CLKS; + + spin_lock_init(&dmic->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dmic->dev, "invalid memory resource\n"); + ret = -ENODEV; + goto err_res; + } + + dmic->io_base = ioremap(res->start, resource_size(res)); + if (!dmic->io_base) { + ret = -ENOMEM; + goto err_res; + } + + dmic->irq = platform_get_irq(pdev, 0); + if (dmic->irq < 0) { + ret = dmic->irq; + goto err_irq; + } + + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!res) { + dev_err(dmic->dev, "invalid dma resource\n"); + ret = -ENODEV; + goto err_irq; + } + omap_dmic_dai_dma_params.dma_req = res->start; + + pm_runtime_enable(dmic->dev); + + /* Disable lines while request is ongoing */ + omap_dmic_write(dmic, OMAP_DMIC_CTRL, 0x00); + + ret = request_threaded_irq(dmic->irq, NULL, omap_dmic_irq_handler, + IRQF_ONESHOT, "DMIC", (void *)dmic); + if (ret) { + dev_err(dmic->dev, "irq request failed\n"); + goto err_irq; + } + + ret = snd_soc_register_dais(&pdev->dev, &omap_dmic_dai, 1); + if (ret) + goto err_dai; + + return 0; + +err_dai: + free_irq(dmic->irq, dmic); +err_irq: + iounmap(dmic->io_base); +err_res: + kfree(dmic); + return ret; +} + +static int __devexit asoc_dmic_remove(struct platform_device *pdev) +{ + struct omap_dmic *dmic = platform_get_drvdata(pdev); + + snd_soc_unregister_dai(&pdev->dev); + free_irq(dmic->irq, dmic); + iounmap(dmic->io_base); + kfree(dmic); + + return 0; +} + +static struct platform_driver asoc_dmic_driver = { + .driver = { + .name = "omap-dmic-dai", + .owner = THIS_MODULE, + }, + .probe = asoc_dmic_probe, + .remove = __devexit_p(asoc_dmic_remove), +}; + +static int __init snd_omap_dmic_init(void) +{ + return platform_driver_register(&asoc_dmic_driver); +} +module_init(snd_omap_dmic_init); + +static void __exit snd_omap_dmic_exit(void) +{ + platform_driver_unregister(&asoc_dmic_driver); +} +module_exit(snd_omap_dmic_exit); + +MODULE_AUTHOR("David Lambert dlambert@ti.com"); +MODULE_DESCRIPTION("OMAP DMIC SoC Interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/omap/omap-dmic.h b/sound/soc/omap/omap-dmic.h new file mode 100644 index 0000000..6a95c44 --- /dev/null +++ b/sound/soc/omap/omap-dmic.h @@ -0,0 +1,38 @@ +/* + * omap-dmic.h -- OMAP Digital Microphone Controller + * + * Author: Liam Girdwood lrg@slimlogic.co.uk + * David Lambert dlambert@ti.com + * Misael Lopez Cruz misael.lopez@ti.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _OMAP_DMIC_H +#define _OMAP_DMIC_H + +#include <sound/soc.h> + + +enum omap_dmic_clk { + OMAP_DMIC_SYSCLK_PAD_CLKS, /* PAD_CLKS */ + OMAP_DMIC_SYSCLK_SLIMBLUS_CLKS, /* SLIMBUS_CLK */ + OMAP_DMIC_SYSCLK_SYNC_MUX_CLKS, /* DMIC_SYNC_MUX_CLK */ +}; + +/* DMIC dividers */ +enum omap_dmic_div { + OMAP_DMIC_CLKDIV, +}; + +struct omap_dmic_link { + int irq_mask; + int threshold; + int format; + int channels; + int polar; +}; + +#endif
On Mon, Dec 27, 2010 at 10:17:02PM -0600, David Lambert wrote:
- case 19200000:
if (div == 5)
div_sel = 0x1;
else if (div == 8)
div_sel = 0x0;
break;
A switch statement for the valid div values would feel more natural, together with a default case to report errors though that's handled below so could be skipped.
- /* Acknowledge irq event */
- omap_dmic_write(dmic, OMAP_DMIC_IRQSTATUS, irq_status);
- if (irq_status & OMAP_DMIC_IRQ_FULL)
Blank line between these two.
dev_dbg(dmic->dev, "DMIC FIFO error %x\n", irq_status);
- if (irq_status & OMAP_DMIC_IRQ_EMPTY)
dev_dbg(dmic->dev, "DMIC FIFO error %x\n", irq_status);
I'd expect these errors to be displayed by default.
- if (irq_status & OMAP_DMIC_IRQ)
dev_dbg(dmic->dev, "DMIC write request\n");
A comment explaining why we don't actually do anything with the request would be helpful. Given that we're ignoring the event it'd seem better to just leave it masked and not take the interrupt in the first place.
+static int omap_dmic_dai_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
+{
- struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
- if (!dmic->active++)
pm_runtime_get_sync(dmic->dev);
The pm_runtime API does refcounting for you so you should be able to just skip the active count check here, IIRC there's a pm_runtime API you could use to query if the DMIC is enabled so you could skip the local refcount entirely.
+static int omap_dmic_dai_hw_free(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
+{
- struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
- struct omap_dmic_link *link = dmic->link;
- int ret = 0;
- if (dmic->active == 1) {
ret = omap_dmic_close(dmic);
link->channels = 0;
- }
I'd feel a bit more happy if this were done in the same place as the drop of the refcount though this should actually be OK I think.
- switch (freq) {
- case 19200000:
- case 24000000:
- case 24576000:
- case 12000000:
dmic->clk_freq = freq;
break;
- default:
dev_err(dai->dev, "clk freq not supported %d\n", freq);
ret = -EINVAL;
goto err_freq;
- }
Can't you ask the parent clock what rate it's set to?
- ret = request_threaded_irq(dmic->irq, NULL, omap_dmic_irq_handler,
IRQF_ONESHOT, "DMIC", (void *)dmic);
- if (ret) {
dev_err(dmic->dev, "irq request failed\n");
goto err_irq;
- }
Does this really need to be a threaded IRQ - the IRQ was just reading from CPU registers as far as I remember?
+MODULE_AUTHOR("David Lambert dlambert@ti.com"); +MODULE_DESCRIPTION("OMAP DMIC SoC Interface"); +MODULE_LICENSE("GPL");
Should have a MODULE_ALIAS too in case it gets built modular.
Mark,
On Tue, Dec 28, 2010 at 8:18 AM, Mark Brown broonie@opensource.wolfsonmicro.com wrote:
On Mon, Dec 27, 2010 at 10:17:02PM -0600, David Lambert wrote:
- case 19200000:
- if (div == 5)
- div_sel = 0x1;
- else if (div == 8)
- div_sel = 0x0;
- break;
A switch statement for the valid div values would feel more natural, together with a default case to report errors though that's handled below so could be skipped.
- /* Acknowledge irq event */
- omap_dmic_write(dmic, OMAP_DMIC_IRQSTATUS, irq_status);
- if (irq_status & OMAP_DMIC_IRQ_FULL)
Blank line between these two.
- dev_dbg(dmic->dev, "DMIC FIFO error %x\n", irq_status);
- if (irq_status & OMAP_DMIC_IRQ_EMPTY)
- dev_dbg(dmic->dev, "DMIC FIFO error %x\n", irq_status);
I'd expect these errors to be displayed by default.
- if (irq_status & OMAP_DMIC_IRQ)
- dev_dbg(dmic->dev, "DMIC write request\n");
A comment explaining why we don't actually do anything with the request would be helpful. Given that we're ignoring the event it'd seem better to just leave it masked and not take the interrupt in the first place.
Since the IRQ handler isn't really doing anything in this driver, would it better to just not have one?
+static int omap_dmic_dai_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
+{
- struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
- if (!dmic->active++)
- pm_runtime_get_sync(dmic->dev);
The pm_runtime API does refcounting for you so you should be able to just skip the active count check here, IIRC there's a pm_runtime API you could use to query if the DMIC is enabled so you could skip the local refcount entirely.
I haven't been able to find a an API to query it, but I could just reference the count directly with dmic->dev->power.usage_count.
+static int omap_dmic_dai_hw_free(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
+{
- struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
- struct omap_dmic_link *link = dmic->link;
- int ret = 0;
- if (dmic->active == 1) {
- ret = omap_dmic_close(dmic);
- link->channels = 0;
- }
I'd feel a bit more happy if this were done in the same place as the drop of the refcount though this should actually be OK I think.
- switch (freq) {
- case 19200000:
- case 24000000:
- case 24576000:
- case 12000000:
- dmic->clk_freq = freq;
- break;
- default:
- dev_err(dai->dev, "clk freq not supported %d\n", freq);
- ret = -EINVAL;
- goto err_freq;
- }
Can't you ask the parent clock what rate it's set to?
Didn't really think there was a need for that on the audio driver. There are clock API's available to query that already.
- ret = request_threaded_irq(dmic->irq, NULL, omap_dmic_irq_handler,
- IRQF_ONESHOT, "DMIC", (void *)dmic);
- if (ret) {
- dev_err(dmic->dev, "irq request failed\n");
- goto err_irq;
- }
Does this really need to be a threaded IRQ - the IRQ was just reading from CPU registers as far as I remember?
+MODULE_AUTHOR("David Lambert dlambert@ti.com"); +MODULE_DESCRIPTION("OMAP DMIC SoC Interface"); +MODULE_LICENSE("GPL");
Should have a MODULE_ALIAS too in case it gets built modular.
-- David Lambert OMAP™ Multimedia 214-567-5692
On Wed, Jan 05, 2011 at 07:56:13AM -0600, Lambert, David wrote:
On Tue, Dec 28, 2010 at 8:18 AM, Mark Brown
A comment explaining why we don't actually do anything with the request would be helpful. Given that we're ignoring the event it'd seem better to just leave it masked and not take the interrupt in the first place.
Since the IRQ handler isn't really doing anything in this driver, would it better to just not have one?
Possibly, if the hardware doesn't care.
- dmic->clk_freq = freq;
- break;
- default:
- dev_err(dai->dev, "clk freq not supported %d\n", freq);
- ret = -EINVAL;
- goto err_freq;
- }
Can't you ask the parent clock what rate it's set to?
Didn't really think there was a need for that on the audio driver. There are clock API's available to query that already.
That's my point - you're requiring that the user pass in the rate rather than querying the clock API.
This codec is to be used by the DMIC driver to control the DMIC codec. This driver will be used on future implementations of the DMIC driver to support codec specific features.
At this time, the codec driver just registers the codec DAI.
Signed-off-by: David Lambert dlambert@ti.com --- sound/soc/codecs/dmic.c | 79 +++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 79 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/dmic.c
diff --git a/sound/soc/codecs/dmic.c b/sound/soc/codecs/dmic.c new file mode 100644 index 0000000..6f54bc5 --- /dev/null +++ b/sound/soc/codecs/dmic.c @@ -0,0 +1,79 @@ +/* + * dmic.c -- SoC audio for Generic Digital MICs + * + * Author: Liam Girdwood lrg@slimlogic.co.uk + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +static struct snd_soc_dai_driver dmic_dai = { + .name = "dmic-hifi", + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 8, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .formats = SNDRV_PCM_FMTBIT_S32_LE + | SNDRV_PCM_FMTBIT_S24_LE + | SNDRV_PCM_FMTBIT_S16_LE, + }, +}; + +static struct snd_soc_codec_driver soc_dmic = {}; + +static int __devinit dmic_dev_probe(struct platform_device *pdev) +{ + return snd_soc_register_codec(&pdev->dev, + &soc_dmic, &dmic_dai, 1); +} + +static int __devexit dmic_dev_remove(struct platform_device *pdev) +{ + snd_soc_unregister_codec(&pdev->dev); + return 0; +} + +static struct platform_driver dmic_driver = { + .driver = { + .name = "dmic-codec", + .owner = THIS_MODULE, + }, + .probe = dmic_dev_probe, + .remove = __devexit_p(dmic_dev_remove), +}; + +static int __init dmic_init(void) +{ + return platform_driver_register(&dmic_driver); +} +module_init(dmic_init); + +static void __exit dmic_exit(void) +{ + platform_driver_unregister(&dmic_driver); +} +module_exit(dmic_exit); + +MODULE_DESCRIPTION("Generic DMIC driver"); +MODULE_AUTHOR("Liam Girdwood lrg@slimlogic.co.uk"); +MODULE_LICENSE("GPL");
On Mon, Dec 27, 2010 at 10:17:03PM -0600, David Lambert wrote:
At this time, the codec driver just registers the codec DAI.
If it's doing more than that it's going to be a separate driver anyway I expect.
+static struct snd_soc_dai_driver dmic_dai = {
- .name = "dmic-hifi",
- .capture = {
.stream_name = "Capture",
.channels_min = 1,
.channels_max = 8,
.rates = SNDRV_PCM_RATE_CONTINUOUS,
.formats = SNDRV_PCM_FMTBIT_S32_LE
| SNDRV_PCM_FMTBIT_S24_LE
| SNDRV_PCM_FMTBIT_S16_LE,
Hrm, so. DMIC signals are inherantly stereo, though obviously you can bind multiple DMICs in parallel using the same clock line so from the CPU side the channel limit makes sense. Similarly the format here really makes very little odds on a PDM interface.
What we probably want here is wildcards for both channel and format limits which we can use to say "this is meaningless, just match anything" in case the other end needs it (like a CPU PDM interface does to set up the DMA).
+static struct platform_driver dmic_driver = {
- .driver = {
.name = "dmic-codec",
Just -dmic.
+MODULE_DESCRIPTION("Generic DMIC driver"); +MODULE_AUTHOR("Liam Girdwood lrg@slimlogic.co.uk"); +MODULE_LICENSE("GPL");
MODULE_ALIAS().
Adds the OMAP DMIC driver and codec to the build.
Signed-off-by: David Lambert dlambert@ti.com --- sound/soc/codecs/Kconfig | 3 +++ sound/soc/codecs/Makefile | 2 ++ sound/soc/omap/Kconfig | 5 +++++ sound/soc/omap/Makefile | 2 ++ 4 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 0f33db2..f6c6d31 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -166,6 +166,9 @@ config SND_SOC_L3 config SND_SOC_DA7210 tristate
+config SND_SOC_DMIC + tristate + config SND_SOC_MAX98088 tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 10e5e09..9139cf9 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -14,6 +14,7 @@ snd-soc-cs42l51-objs := cs42l51.o snd-soc-cs4270-objs := cs4270.o snd-soc-cx20442-objs := cx20442.o snd-soc-da7210-objs := da7210.o +snd-soc-dmic-objs := dmic.o snd-soc-l3-objs := l3.o snd-soc-max98088-objs := max98088.o snd-soc-pcm3008-objs := pcm3008.o @@ -91,6 +92,7 @@ obj-$(CONFIG_SND_SOC_CS42L51) += snd-soc-cs42l51.o obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o obj-$(CONFIG_SND_SOC_CX20442) += snd-soc-cx20442.o obj-$(CONFIG_SND_SOC_DA7210) += snd-soc-da7210.o +obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o obj-$(CONFIG_SND_SOC_JZ4740_CODEC) += snd-soc-jz4740-codec.o obj-$(CONFIG_SND_SOC_MAX98088) += snd-soc-max98088.o diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index a088db6..548b13c 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -9,6 +9,9 @@ config SND_OMAP_SOC_MCBSP config SND_OMAP_SOC_MCPDM tristate
+config SND_OMAP_SOC_DMIC + tristate + config SND_OMAP_SOC_N810 tristate "SoC Audio support for Nokia N810" depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C @@ -103,6 +106,8 @@ config SND_OMAP_SOC_SDP4430 depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_4430SDP select SND_OMAP_SOC_MCPDM select SND_SOC_TWL6040 + select SND_SOC_DMIC + select SND_OMAP_SOC_DMIC help Say Y if you want to add support for SoC audio on Texas Instruments SDP4430. diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index ba9fc65..6ff27f5 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -1,9 +1,11 @@ # OMAP Platform Support snd-soc-omap-objs := omap-pcm.o +snd-soc-omap-dmic-objs := omap-dmic.o snd-soc-omap-mcbsp-objs := omap-mcbsp.o snd-soc-omap-mcpdm-objs := omap-mcpdm.o mcpdm.o
obj-$(CONFIG_SND_OMAP_SOC) += snd-soc-omap.o +obj-$(CONFIG_SND_OMAP_SOC_DMIC) += snd-soc-omap-dmic.o obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o
On Mon, Dec 27, 2010 at 10:17:04PM -0600, David Lambert wrote:
Adds the OMAP DMIC driver and codec to the build.
Signed-off-by: David Lambert dlambert@ti.com
sound/soc/codecs/Kconfig | 3 +++ sound/soc/codecs/Makefile | 2 ++ sound/soc/omap/Kconfig | 5 +++++ sound/soc/omap/Makefile | 2 ++
This should be one of the last patches in the series, but given the sort of drivers you're introducing I'd expect the drivers to just directly add the build system stuff in the patch.
4 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 0f33db2..f6c6d31 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -166,6 +166,9 @@ config SND_SOC_L3 config SND_SOC_DA7210 tristate
+config SND_SOC_DMIC
- tristate
config SND_SOC_MAX98088 tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 10e5e09..9139cf9 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -14,6 +14,7 @@ snd-soc-cs42l51-objs := cs42l51.o snd-soc-cs4270-objs := cs4270.o snd-soc-cx20442-objs := cx20442.o snd-soc-da7210-objs := da7210.o +snd-soc-dmic-objs := dmic.o snd-soc-l3-objs := l3.o snd-soc-max98088-objs := max98088.o snd-soc-pcm3008-objs := pcm3008.o @@ -91,6 +92,7 @@ obj-$(CONFIG_SND_SOC_CS42L51) += snd-soc-cs42l51.o obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o obj-$(CONFIG_SND_SOC_CX20442) += snd-soc-cx20442.o obj-$(CONFIG_SND_SOC_DA7210) += snd-soc-da7210.o +obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o obj-$(CONFIG_SND_SOC_JZ4740_CODEC) += snd-soc-jz4740-codec.o obj-$(CONFIG_SND_SOC_MAX98088) += snd-soc-max98088.o diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index a088db6..548b13c 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -9,6 +9,9 @@ config SND_OMAP_SOC_MCBSP config SND_OMAP_SOC_MCPDM tristate
+config SND_OMAP_SOC_DMIC
- tristate
config SND_OMAP_SOC_N810 tristate "SoC Audio support for Nokia N810" depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C @@ -103,6 +106,8 @@ config SND_OMAP_SOC_SDP4430 depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_4430SDP select SND_OMAP_SOC_MCPDM select SND_SOC_TWL6040
- select SND_SOC_DMIC
- select SND_OMAP_SOC_DMIC help Say Y if you want to add support for SoC audio on Texas Instruments SDP4430.
diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index ba9fc65..6ff27f5 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -1,9 +1,11 @@ # OMAP Platform Support snd-soc-omap-objs := omap-pcm.o +snd-soc-omap-dmic-objs := omap-dmic.o snd-soc-omap-mcbsp-objs := omap-mcbsp.o snd-soc-omap-mcpdm-objs := omap-mcpdm.o mcpdm.o
obj-$(CONFIG_SND_OMAP_SOC) += snd-soc-omap.o +obj-$(CONFIG_SND_OMAP_SOC_DMIC) += snd-soc-omap-dmic.o obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o
-- 1.7.0.4
On Tue, Dec 28, 2010 at 5:40 AM, Mark Brown broonie@opensource.wolfsonmicro.com wrote:
On Mon, Dec 27, 2010 at 10:17:04PM -0600, David Lambert wrote:
Adds the OMAP DMIC driver and codec to the build.
Signed-off-by: David Lambert dlambert@ti.com
sound/soc/codecs/Kconfig | 3 +++ sound/soc/codecs/Makefile | 2 ++ sound/soc/omap/Kconfig | 5 +++++ sound/soc/omap/Makefile | 2 ++
This should be one of the last patches in the series, but given the sort of drivers you're introducing I'd expect the drivers to just directly add the build system stuff in the patch.
OK... I can put the makefile and kconfig changes in with the DMIC driver and the DMIC codec.
4 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 0f33db2..f6c6d31 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -166,6 +166,9 @@ config SND_SOC_L3 config SND_SOC_DA7210 tristate
+config SND_SOC_DMIC
- tristate
config SND_SOC_MAX98088 tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 10e5e09..9139cf9 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -14,6 +14,7 @@ snd-soc-cs42l51-objs := cs42l51.o snd-soc-cs4270-objs := cs4270.o snd-soc-cx20442-objs := cx20442.o snd-soc-da7210-objs := da7210.o +snd-soc-dmic-objs := dmic.o snd-soc-l3-objs := l3.o snd-soc-max98088-objs := max98088.o snd-soc-pcm3008-objs := pcm3008.o @@ -91,6 +92,7 @@ obj-$(CONFIG_SND_SOC_CS42L51) += snd-soc-cs42l51.o obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o obj-$(CONFIG_SND_SOC_CX20442) += snd-soc-cx20442.o obj-$(CONFIG_SND_SOC_DA7210) += snd-soc-da7210.o +obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o obj-$(CONFIG_SND_SOC_JZ4740_CODEC) += snd-soc-jz4740-codec.o obj-$(CONFIG_SND_SOC_MAX98088) += snd-soc-max98088.o diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index a088db6..548b13c 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -9,6 +9,9 @@ config SND_OMAP_SOC_MCBSP config SND_OMAP_SOC_MCPDM tristate
+config SND_OMAP_SOC_DMIC
- tristate
config SND_OMAP_SOC_N810 tristate "SoC Audio support for Nokia N810" depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C @@ -103,6 +106,8 @@ config SND_OMAP_SOC_SDP4430 depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_4430SDP select SND_OMAP_SOC_MCPDM select SND_SOC_TWL6040
- select SND_SOC_DMIC
- select SND_OMAP_SOC_DMIC
help Say Y if you want to add support for SoC audio on Texas Instruments SDP4430. diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index ba9fc65..6ff27f5 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -1,9 +1,11 @@ # OMAP Platform Support snd-soc-omap-objs := omap-pcm.o +snd-soc-omap-dmic-objs := omap-dmic.o snd-soc-omap-mcbsp-objs := omap-mcbsp.o snd-soc-omap-mcpdm-objs := omap-mcpdm.o mcpdm.o
obj-$(CONFIG_SND_OMAP_SOC) += snd-soc-omap.o +obj-$(CONFIG_SND_OMAP_SOC_DMIC) += snd-soc-omap-dmic.o obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o
-- 1.7.0.4
-- David Lambert OMAP™ Multimedia 214-567-5692
Adds HWMOD entries for the OMAP DMIC driver and creates a platform device. The HWMOD entires define the system resource requirements for the drvier such as DMA addresses, channels, and IRQ's. Placing this information in the HWMOD database allows for more generic drivers to be written and having the specific implementation details defined in HWMOD.
Signed-off-by: David Lambert dlambert@ti.com --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 91 ++++++++++++++++++++++++++++ arch/arm/plat-omap/devices.c | 35 +++++++++++ 2 files changed, 126 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 7274db4..f9b2ad3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -383,6 +383,95 @@ static struct omap_hwmod omap44xx_l4_wkup_hwmod = { };
/* + * 'dmic' class + * digital microphone controller + */ + +static struct omap_hwmod_class_sysconfig omap44xx_dmic_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap44xx_dmic_hwmod_class = { + .name = "omap-dmic", + .sysc = &omap44xx_dmic_sysc, +}; + +/* dmic */ +static struct omap_hwmod omap44xx_dmic_hwmod; +static struct omap_hwmod_irq_info omap44xx_dmic_irqs[] = { + { .irq = 114 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = { + { .dma_req = 66 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { + { + .pa_start = 0x4012e000, + .pa_end = 0x4012e07f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> dmic */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_dmic_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_dmic_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dmic_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = { + { + .pa_start = 0x4902e000, + .pa_end = 0x4902e07f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> dmic (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_dmic_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_dmic_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dmic_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* dmic slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dmic_slaves[] = { + &omap44xx_l4_abe__dmic, + &omap44xx_l4_abe__dmic_dma, +}; + +static struct omap_hwmod omap44xx_dmic_hwmod = { + .name = "omap-dmic", + .class = &omap44xx_dmic_hwmod_class, + .mpu_irqs = omap44xx_dmic_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dmic_irqs), + .sdma_reqs = omap44xx_dmic_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dmic_sdma_reqs), + .main_clk = "dmic_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL, + }, + }, + .slaves = omap44xx_dmic_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dmic_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* * 'mpu_bus' class * instance(s): mpu_private */ @@ -826,6 +915,8 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_l4_cfg_hwmod, &omap44xx_l4_per_hwmod, &omap44xx_l4_wkup_hwmod, + /* dmic class */ + &omap44xx_dmic_hwmod, /* mpu_bus class */ &omap44xx_mpu_private_hwmod,
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index fc81912..b347f75 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -72,6 +72,40 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
/*-------------------------------------------------------------------------*/
+#if defined(CONFIG_SND_OMAP_SOC_DMIC) || \ + defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE) + +static struct omap_device_pm_latency omap_dmic_latency[] = { + { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + +static void omap_init_dmic(void) +{ + struct omap_hwmod *oh; + struct omap_device *od; + + oh = omap_hwmod_lookup("omap-dmic"); + if (!oh) { + printk(KERN_ERR "Could not look up dmic hw_mod\n"); + return; + } + + od = omap_device_build("omap-dmic-dai", -1, oh, NULL, 0, + omap_dmic_latency, + ARRAY_SIZE(omap_dmic_latency), 0); + if (IS_ERR(od)) + printk(KERN_ERR "Could not build omap_device for omap-dmic-dai\n"); +} +#else +static inline void omap_init_dmic(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + #if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \ defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
@@ -328,6 +362,7 @@ static int __init omap_init_devices(void) /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ + omap_init_dmic(); omap_init_rng(); omap_init_mcpdm(); omap_init_uwire();
This creates the DMIC codec platform devices.
The platform devices create an instance of the driver during boot up.
Signed-off-by: David Lambert dlambert@ti.com --- arch/arm/mach-omap2/board-4430sdp.c | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index df5a425..bf271e5 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -505,6 +505,16 @@ static void __init omap_sfh7741prox_init(void) } }
+static struct platform_device codec_dmic0 = { + .name = "dmic-codec", + .id = 0, +}; + +static inline void omap_dmic_init(void) +{ + platform_device_register(&codec_dmic0); +} + static void __init omap_4430sdp_init(void) { int status; @@ -528,6 +538,7 @@ static void __init omap_4430sdp_init(void) spi_register_board_info(sdp4430_spi_board_info, ARRAY_SIZE(sdp4430_spi_board_info)); } + omap_dmic_init(); }
static void __init omap_4430sdp_map_io(void)
participants (3)
-
David Lambert
-
Lambert, David
-
Mark Brown