At Thu, 12 Apr 2012 22:11:25 +0200 (CEST), Jesper Juhl wrote:

In sound/pci/hda/patch_realtek.c::alc_auto_fill_dac_nids(), in the 'for (;;)' loop, if the 'badness' value returned from fill_and_eval_dacs() is negative, then we'll return from the function without freeing the memory we allocated for 'best_cfg', thus leaking. Fix the leak by kfree()'ing the memory when badness is negative.

While I was there I also noticed some trailing whitespace in the function that I removed (along with all other trailing whitespace in the file) - it didn't seem worth-while to do that as two patches, so I hope it's OK that I just did it all as one patch.

Signed-off-by: Jesper Juhl jj@chaosbits.net

Thanks, applied now.

Takashi

---

sound/pci/hda/patch_realtek.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9917e55..c5e1a1a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3398,8 +3398,10 @@ static int alc_auto_fill_dac_nids(struct hda_codec *codec) for (;;) { badness = fill_and_eval_dacs(codec, fill_hardwired, fill_mio_first);

• if (badness < 0)
  

• if (badness < 0) {
  

• 	kfree(best_cfg);
  return badness;
  

• }
  

  debug_badness("==> lo_type=%d, wired=%d, mio=%d, badness=0x%x\n", cfg->line_out_type, fill_hardwired, fill_mio_first, badness);

@@ -3434,7 +3436,7 @@ static int alc_auto_fill_dac_nids(struct hda_codec *codec) cfg->line_out_type = AUTO_PIN_SPEAKER_OUT; fill_hardwired = true; continue;

• } 
  

• }
  

  if (cfg->hp_outs > 0 && cfg->line_out_type == AUTO_PIN_SPEAKER_OUT) { cfg->speaker_outs = cfg->line_outs;

@@ -3448,7 +3450,7 @@ static int alc_auto_fill_dac_nids(struct hda_codec *codec) cfg->line_out_type = AUTO_PIN_HP_OUT; fill_hardwired = true; continue;

• } 
  

• }
  

  break; }

@@ -4423,7 +4425,7 @@ static int alc_parse_auto_config(struct hda_codec *codec, static int alc880_parse_auto_config(struct hda_codec *codec) { static const hda_nid_t alc880_ignore[] = { 0x1d, 0 };

• static const hda_nid_t alc880_ssids[] = { 0x15, 0x1b, 0x14, 0 };

• static const hda_nid_t alc880_ssids[] = { 0x15, 0x1b, 0x14, 0 }; return alc_parse_auto_config(codec, alc880_ignore, alc880_ssids);

}

@@ -6079,7 +6081,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { * Basically the device should work as is without the fixup table. * If BIOS doesn't give a proper info, enable the corresponding * fixup entry.

• */ 
  

• */
  

  SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A", ALC269_FIXUP_AMIC), SND_PCI_QUIRK(0x1043, 0x1013, "ASUS N61Da", ALC269_FIXUP_AMIC),

@@ -6296,7 +6298,7 @@ static void alc_fixup_no_jack_detect(struct hda_codec *codec, { if (action == ALC_FIXUP_ACT_PRE_PROBE) codec->no_jack_detect = 1; -} +}

static const struct alc_fixup alc861_fixups[] = { [ALC861_FIXUP_FSC_AMILO_PI1505] = { @@ -6714,7 +6716,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { * Basically the device should work as is without the fixup table. * If BIOS doesn't give a proper info, enable the corresponding * fixup entry.

• */ 
  

• */
  

  SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC662_FIXUP_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC662_FIXUP_ASUS_MODE3), SND_PCI_QUIRK(0x1043, 0x1173, "ASUS K73Jn", ALC662_FIXUP_ASUS_MODE1),

-- 1.7.10

-- Jesper Juhl jj@chaosbits.net http://www.chaosbits.net/ Don't top-post http://www.catb.org/jargon/html/T/top-post.html Plain text mails only, please.