[alsa-devel] [PATCH 0/2 v8] Add I2S audio support for ARC AXS10x boards
ARC AXS10x platforms consist of a mainboard with several peripherals. One of those peripherals is an HDMI output port controlled by the ADV7511 transmitter.
This patch set adds I2S audio for the AXS10x platform.
NOTE: Although the mainline I2S driver uses ALSA DMA engine, this controller can be built without DMA support so it was necessary to add this custom platform driver so that HDMI audio works in AXS boards.
Changes v7 -> v8: * Build PIO PCM as module * Always unmask interrupts even when in DMA mode * Fallback to PIO mode only if ALSA DMA engine probe fails
Changes v6 -> v7: * Discard the use of memcpy * Report IRQ_HANDLED only when there is an IRQ * Use interrupts to check if PIO mode is in use * Unmask interrupts only when in PIO mode * Remove empty functions
Changes v5 -> v6: * Use SNDRV_DMA_TYPE_CONTINUOUS
Changes v4 -> v5: * Resolve undefined references when compiling as module * Dropped adv7511 audio patches * Use DMA properties in I2S to check which mode to use: PIO or DMA (as suggested by Lars-Peter Clausen)
Changes v3 -> v4: * Reintroduced custom PCM driver (see note below) * Use DT boolean to switch between ALSA DMA engine PCM or custom PCM * Use fifo depth to program I2S FCR * Update I2S documentation
Changes v2 -> v3: * Removed pll_config functions (as suggested by Alexey Brodkin) * Removed HDMI start at adv7511_core (as suggested by Archit Taneja) * Use NOP functions for adv7511_audio (as suggested by Archit Taneja) * Added adv7511_audio_exit() function (as suggested by Archit Taneja) * Moved adv7511 to its own folder (as suggested by Archit Taneja) * Separated file rename of adv7511_core (as suggested by Emil Velikov) * Compile adv7511 as module if ALSA SoC is compiled as module * Load adv7511 audio only if declared in device tree (as suggested by Laurent Pinchart) * Dropped custom platform driver, using now ALSA DMA engine * Dropped IRQ handler for I2S
Changes v1 -> v2: * DT bindings moved to separate patch (as suggested by Alexey Brodkin) * Removed defconfigs entries (as suggested by Alexey Brodkin)
Cc: Carlos Palminha palminha@synopsys.com Cc: Mark Brown broonie@kernel.org Cc: Liam Girdwood lgirdwood@gmail.com Cc: Jaroslav Kysela perex@perex.cz Cc: Takashi Iwai tiwai@suse.com Cc: Rob Herring robh@kernel.org Cc: Alexey Brodkin abrodkin@synopsys.com Cc: linux-snps-arc@lists.infradead.org Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org
Jose Abreu (2): ASoC: dwc: Add PIO PCM extension ASoC: dwc: Add irq parameter to DOCUMENTATION
.../devicetree/bindings/sound/designware-i2s.txt | 4 + sound/soc/dwc/Kconfig | 9 + sound/soc/dwc/Makefile | 1 + sound/soc/dwc/designware_i2s.c | 152 ++++++-------- sound/soc/dwc/designware_pcm.c | 222 +++++++++++++++++++++ sound/soc/dwc/local.h | 122 +++++++++++ 6 files changed, 422 insertions(+), 88 deletions(-) create mode 100644 sound/soc/dwc/designware_pcm.c create mode 100644 sound/soc/dwc/local.h
A PCM extension was added to I2S driver so that audio samples are transferred using PIO mode.
The PCM supports two channels @ 16 or 32 bits with rates 32k, 44.1k and 48k.
Although the mainline I2S driver uses ALSA DMA engine the I2S controller can be built without DMA support, therefore this is the reason why this extension was added.
Signed-off-by: Jose Abreu joabreu@synopsys.com Cc: Carlos Palminha palminha@synopsys.com Cc: Mark Brown broonie@kernel.org Cc: Liam Girdwood lgirdwood@gmail.com Cc: Jaroslav Kysela perex@perex.cz Cc: Takashi Iwai tiwai@suse.com Cc: Rob Herring robh@kernel.org Cc: Alexey Brodkin abrodkin@synopsys.com Cc: linux-snps-arc@lists.infradead.org Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org ---
Changes v7 -> v8: * Build PIO PCM as module * Always unmask interrupts even when in DMA mode * Fallback to PIO mode only if ALSA DMA engine probe fails
Changes v6 -> v7: * Discard the use of memcpy * Report IRQ_HANDLED only when there is an IRQ * Use interrupts to check if PIO mode is in use * Unmask interrupts only when in PIO mode * Remove empty functions
Changes v5 -> v6: * Use SNDRV_DMA_TYPE_CONTINUOUS
Changes v4 -> v5: * Resolve undefined references when compiling as module * Use DMA properties in I2S to check which mode to use: PIO or DMA (as suggested by Lars-Peter Clausen)
Changes v3 -> v4: * Reintroduced custom PCM driver * Use DT boolean to switch between ALSA DMA engine PCM or custom PCM
Changes v2 -> v3: * Removed pll_config functions (as suggested by Alexey Brodkin) * Dropped custom platform driver, using now ALSA DMA engine * Dropped IRQ handler for I2S
No changes v1 -> v2.
sound/soc/dwc/Kconfig | 9 ++ sound/soc/dwc/Makefile | 1 + sound/soc/dwc/designware_i2s.c | 152 ++++++++++++---------------- sound/soc/dwc/designware_pcm.c | 222 +++++++++++++++++++++++++++++++++++++++++ sound/soc/dwc/local.h | 122 ++++++++++++++++++++++ 5 files changed, 418 insertions(+), 88 deletions(-) create mode 100644 sound/soc/dwc/designware_pcm.c create mode 100644 sound/soc/dwc/local.h
diff --git a/sound/soc/dwc/Kconfig b/sound/soc/dwc/Kconfig index d50e085..c297efe 100644 --- a/sound/soc/dwc/Kconfig +++ b/sound/soc/dwc/Kconfig @@ -7,4 +7,13 @@ config SND_DESIGNWARE_I2S Synopsys desigwnware I2S device. The device supports upto maximum of 8 channels each for play and record.
+config SND_DESIGNWARE_PCM + tristate "PCM PIO extension for I2S driver" + depends on SND_DESIGNWARE_I2S + help + Say Y, M or N if you want to add a custom ALSA extension that registers + a PCM and uses PIO to transfer data. + + This functionality is specially suited for I2S devices that don't have + DMA support.
diff --git a/sound/soc/dwc/Makefile b/sound/soc/dwc/Makefile index 319371f..1b48bccc 100644 --- a/sound/soc/dwc/Makefile +++ b/sound/soc/dwc/Makefile @@ -1,3 +1,4 @@ # SYNOPSYS Platform Support obj-$(CONFIG_SND_DESIGNWARE_I2S) += designware_i2s.o +obj-$(CONFIG_SND_DESIGNWARE_PCM) += designware_pcm.o
diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c index 4c4f0dc..a238fa0 100644 --- a/sound/soc/dwc/designware_i2s.c +++ b/sound/soc/dwc/designware_i2s.c @@ -24,90 +24,7 @@ #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/dmaengine_pcm.h> - -/* common register for all channel */ -#define IER 0x000 -#define IRER 0x004 -#define ITER 0x008 -#define CER 0x00C -#define CCR 0x010 -#define RXFFR 0x014 -#define TXFFR 0x018 - -/* I2STxRxRegisters for all channels */ -#define LRBR_LTHR(x) (0x40 * x + 0x020) -#define RRBR_RTHR(x) (0x40 * x + 0x024) -#define RER(x) (0x40 * x + 0x028) -#define TER(x) (0x40 * x + 0x02C) -#define RCR(x) (0x40 * x + 0x030) -#define TCR(x) (0x40 * x + 0x034) -#define ISR(x) (0x40 * x + 0x038) -#define IMR(x) (0x40 * x + 0x03C) -#define ROR(x) (0x40 * x + 0x040) -#define TOR(x) (0x40 * x + 0x044) -#define RFCR(x) (0x40 * x + 0x048) -#define TFCR(x) (0x40 * x + 0x04C) -#define RFF(x) (0x40 * x + 0x050) -#define TFF(x) (0x40 * x + 0x054) - -/* I2SCOMPRegisters */ -#define I2S_COMP_PARAM_2 0x01F0 -#define I2S_COMP_PARAM_1 0x01F4 -#define I2S_COMP_VERSION 0x01F8 -#define I2S_COMP_TYPE 0x01FC - -/* - * Component parameter register fields - define the I2S block's - * configuration. - */ -#define COMP1_TX_WORDSIZE_3(r) (((r) & GENMASK(27, 25)) >> 25) -#define COMP1_TX_WORDSIZE_2(r) (((r) & GENMASK(24, 22)) >> 22) -#define COMP1_TX_WORDSIZE_1(r) (((r) & GENMASK(21, 19)) >> 19) -#define COMP1_TX_WORDSIZE_0(r) (((r) & GENMASK(18, 16)) >> 16) -#define COMP1_TX_CHANNELS(r) (((r) & GENMASK(10, 9)) >> 9) -#define COMP1_RX_CHANNELS(r) (((r) & GENMASK(8, 7)) >> 7) -#define COMP1_RX_ENABLED(r) (((r) & BIT(6)) >> 6) -#define COMP1_TX_ENABLED(r) (((r) & BIT(5)) >> 5) -#define COMP1_MODE_EN(r) (((r) & BIT(4)) >> 4) -#define COMP1_FIFO_DEPTH_GLOBAL(r) (((r) & GENMASK(3, 2)) >> 2) -#define COMP1_APB_DATA_WIDTH(r) (((r) & GENMASK(1, 0)) >> 0) - -#define COMP2_RX_WORDSIZE_3(r) (((r) & GENMASK(12, 10)) >> 10) -#define COMP2_RX_WORDSIZE_2(r) (((r) & GENMASK(9, 7)) >> 7) -#define COMP2_RX_WORDSIZE_1(r) (((r) & GENMASK(5, 3)) >> 3) -#define COMP2_RX_WORDSIZE_0(r) (((r) & GENMASK(2, 0)) >> 0) - -/* Number of entries in WORDSIZE and DATA_WIDTH parameter registers */ -#define COMP_MAX_WORDSIZE (1 << 3) -#define COMP_MAX_DATA_WIDTH (1 << 2) - -#define MAX_CHANNEL_NUM 8 -#define MIN_CHANNEL_NUM 2 - -union dw_i2s_snd_dma_data { - struct i2s_dma_data pd; - struct snd_dmaengine_dai_dma_data dt; -}; - -struct dw_i2s_dev { - void __iomem *i2s_base; - struct clk *clk; - int active; - unsigned int capability; - unsigned int quirks; - unsigned int i2s_reg_comp1; - unsigned int i2s_reg_comp2; - struct device *dev; - u32 ccr; - u32 xfer_resolution; - u32 fifo_th; - - /* data related to DMA transfers b/w i2s and DMAC */ - union dw_i2s_snd_dma_data play_dma_data; - union dw_i2s_snd_dma_data capture_dma_data; - struct i2s_clk_config_data config; - int (*i2s_clk_cfg)(struct i2s_clk_config_data *config); -}; +#include "local.h"
static inline void i2s_write_reg(void __iomem *io_base, int reg, u32 val) { @@ -181,6 +98,43 @@ static inline void i2s_enable_irqs(struct dw_i2s_dev *dev, u32 stream, } }
+static irqreturn_t i2s_irq_handler(int irq, void *dev_id) +{ + struct dw_i2s_dev *dev = dev_id; + bool irq_valid = false; + u32 isr[4]; + int i; + + for (i = 0; i < 4; i++) + isr[i] = i2s_read_reg(dev->i2s_base, ISR(i)); + + i2s_clear_irqs(dev, SNDRV_PCM_STREAM_PLAYBACK); + i2s_clear_irqs(dev, SNDRV_PCM_STREAM_CAPTURE); + + for (i = 0; i < 4; i++) { + if (isr[i] & 0x33) + irq_valid = true; + + /* + * Check if TX fifo is empty. If empty fill FIFO with samples + * NOTE: Only two channels supported + */ + if ((isr[i] & 0x10) && (i == 0) && dev->use_pio) + dw_pcm_push_tx(dev); + + /* Error Handling */ + if (isr[i] & 0x20) + dev_err(dev->dev, "TX overrun (ch_id=%d)\n", i); + if (isr[i] & 0x02) + dev_err(dev->dev, "RX overrun (ch_id=%d)\n", i); + } + + if (irq_valid) + return IRQ_HANDLED; + else + return IRQ_NONE; +} + static void i2s_start(struct dw_i2s_dev *dev, struct snd_pcm_substream *substream) { @@ -640,7 +594,7 @@ static int dw_i2s_probe(struct platform_device *pdev) const struct i2s_platform_data *pdata = pdev->dev.platform_data; struct dw_i2s_dev *dev; struct resource *res; - int ret; + int ret, irq; struct snd_soc_dai_driver *dw_i2s_dai; const char *clk_id;
@@ -665,6 +619,16 @@ static int dw_i2s_probe(struct platform_device *pdev)
dev->dev = &pdev->dev;
+ irq = platform_get_irq(pdev, 0); + if (irq >= 0) { + ret = devm_request_irq(&pdev->dev, irq, i2s_irq_handler, 0, + pdev->name, dev); + if (ret < 0) { + dev_err(&pdev->dev, "failed to request irq\n"); + return ret; + } + } + dev->i2s_reg_comp1 = I2S_COMP_PARAM_1; dev->i2s_reg_comp2 = I2S_COMP_PARAM_2; if (pdata) { @@ -711,12 +675,24 @@ static int dw_i2s_probe(struct platform_device *pdev)
if (!pdata) { ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); - if (ret) { + if (ret == -EPROBE_DEFER) { dev_err(&pdev->dev, - "Could not register PCM: %d\n", ret); - goto err_clk_disable; + "failed to register PCM, deferring probe\n"); + return ret; + } else if (ret) { + dev_err(&pdev->dev, + "Could not register DMA PCM: %d\n" + "falling back to PIO mode\n", ret); + ret = dw_pcm_register(pdev); + if (ret) { + dev_err(&pdev->dev, + "Could not register PIO PCM: %d\n", + ret); + goto err_clk_disable; + } } } + pm_runtime_enable(&pdev->dev); return 0;
diff --git a/sound/soc/dwc/designware_pcm.c b/sound/soc/dwc/designware_pcm.c new file mode 100644 index 0000000..c54663a --- /dev/null +++ b/sound/soc/dwc/designware_pcm.c @@ -0,0 +1,222 @@ +/* + * ALSA SoC Synopsys PIO PCM for I2S driver + * + * sound/soc/dwc/designware_pcm.c + * + * Copyright (C) 2016 Synopsys + * Jose Abreu joabreu@synopsys.com + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/io.h> +#include <linux/rcupdate.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include "local.h" + +#define BUFFER_BYTES_MAX (3 * 2 * 8 * PERIOD_BYTES_MIN) +#define PERIOD_BYTES_MIN 4096 +#define PERIODS_MIN 2 + +#define dw_pcm_tx_fn(sample_bits) \ +static unsigned int dw_pcm_tx_##sample_bits(struct dw_i2s_dev *dev, \ + struct snd_pcm_runtime *runtime, unsigned int tx_ptr, \ + bool *period_elapsed) \ +{ \ + const u##sample_bits (*p)[2] = (void *)runtime->dma_area; \ + unsigned int period_pos = tx_ptr % runtime->period_size; \ + int i; \ +\ + for (i = 0; i < dev->fifo_th; i++) { \ + iowrite32(p[tx_ptr][0], dev->i2s_base + LRBR_LTHR(0)); \ + iowrite32(p[tx_ptr][1], dev->i2s_base + RRBR_RTHR(0)); \ + period_pos++; \ + if (++tx_ptr >= runtime->buffer_size) \ + tx_ptr = 0; \ + } \ + *period_elapsed = period_pos >= runtime->period_size; \ + return tx_ptr; \ +} + +dw_pcm_tx_fn(16); +dw_pcm_tx_fn(32); + +#undef dw_pcm_tx_fn + +static const struct snd_pcm_hardware dw_pcm_hardware = { + .info = SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BLOCK_TRANSFER, + .rates = SNDRV_PCM_RATE_32000 | + SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000, + .rate_min = 32000, + .rate_max = 48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S32_LE, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = BUFFER_BYTES_MAX, + .period_bytes_min = PERIOD_BYTES_MIN, + .period_bytes_max = BUFFER_BYTES_MAX / PERIODS_MIN, + .periods_min = PERIODS_MIN, + .periods_max = BUFFER_BYTES_MAX / PERIOD_BYTES_MIN, + .fifo_size = 16, +}; + +void dw_pcm_push_tx(struct dw_i2s_dev *dev) +{ + struct snd_pcm_substream *tx_substream; + bool tx_active, period_elapsed; + + rcu_read_lock(); + tx_substream = rcu_dereference(dev->tx_substream); + tx_active = tx_substream && snd_pcm_running(tx_substream); + if (tx_active) { + unsigned int tx_ptr = READ_ONCE(dev->tx_ptr); + unsigned int new_tx_ptr = dev->tx_fn(dev, tx_substream->runtime, + tx_ptr, &period_elapsed); + cmpxchg(&dev->tx_ptr, tx_ptr, new_tx_ptr); + + if (period_elapsed) + snd_pcm_period_elapsed(tx_substream); + } + rcu_read_unlock(); +} +EXPORT_SYMBOL_GPL(dw_pcm_push_tx); + +static int dw_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct dw_i2s_dev *dev = snd_soc_dai_get_drvdata(rtd->cpu_dai); + + snd_soc_set_runtime_hwparams(substream, &dw_pcm_hardware); + snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); + runtime->private_data = dev; + + return 0; +} + +static int dw_pcm_close(struct snd_pcm_substream *substream) +{ + synchronize_rcu(); + return 0; +} + +static int dw_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct dw_i2s_dev *dev = runtime->private_data; + int ret; + + switch (params_channels(hw_params)) { + case 2: + break; + default: + dev_err(dev->dev, "invalid channels number\n"); + return -EINVAL; + } + + switch (params_format(hw_params)) { + case SNDRV_PCM_FORMAT_S16_LE: + dev->tx_fn = dw_pcm_tx_16; + break; + case SNDRV_PCM_FORMAT_S32_LE: + dev->tx_fn = dw_pcm_tx_32; + break; + default: + dev_err(dev->dev, "invalid format\n"); + return -EINVAL; + } + + if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK) { + dev_err(dev->dev, "only playback is available\n"); + return -EINVAL; + } + + ret = snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(hw_params)); + return (ret < 0) ? ret : 0; +} + +static int dw_pcm_hw_free(struct snd_pcm_substream *substream) +{ + return snd_pcm_lib_free_pages(substream); +} + +static int dw_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct dw_i2s_dev *dev = runtime->private_data; + int ret = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + WRITE_ONCE(dev->tx_ptr, 0); + rcu_assign_pointer(dev->tx_substream, substream); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + rcu_assign_pointer(dev->tx_substream, NULL); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static snd_pcm_uframes_t dw_pcm_pointer(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct dw_i2s_dev *dev = runtime->private_data; + snd_pcm_uframes_t pos = READ_ONCE(dev->tx_ptr); + + return pos < runtime->buffer_size ? pos : 0; +} + +static int dw_pcm_new(struct snd_soc_pcm_runtime *rtd) +{ + size_t size = dw_pcm_hardware.buffer_bytes_max; + + return snd_pcm_lib_preallocate_pages_for_all(rtd->pcm, + SNDRV_DMA_TYPE_CONTINUOUS, + snd_dma_continuous_data(GFP_KERNEL), size, size); +} + +static void dw_pcm_free(struct snd_pcm *pcm) +{ + snd_pcm_lib_preallocate_free_for_all(pcm); +} + +static const struct snd_pcm_ops dw_pcm_ops = { + .open = dw_pcm_open, + .close = dw_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = dw_pcm_hw_params, + .hw_free = dw_pcm_hw_free, + .trigger = dw_pcm_trigger, + .pointer = dw_pcm_pointer, +}; + +static const struct snd_soc_platform_driver dw_pcm_platform = { + .pcm_new = dw_pcm_new, + .pcm_free = dw_pcm_free, + .ops = &dw_pcm_ops, +}; + +int dw_pcm_register(struct platform_device *pdev) +{ + return devm_snd_soc_register_platform(&pdev->dev, &dw_pcm_platform); +} +EXPORT_SYMBOL_GPL(dw_pcm_register); diff --git a/sound/soc/dwc/local.h b/sound/soc/dwc/local.h new file mode 100644 index 0000000..6a8edc7 --- /dev/null +++ b/sound/soc/dwc/local.h @@ -0,0 +1,122 @@ +/* + * Copyright (ST) 2012 Rajeev Kumar (rajeevkumar.linux@gmail.com) + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __DESIGNWARE_LOCAL_H +#define __DESIGNWARE_LOCAL_H + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/types.h> +#include <sound/dmaengine_pcm.h> +#include <sound/pcm.h> +#include <sound/designware_i2s.h> + +/* common register for all channel */ +#define IER 0x000 +#define IRER 0x004 +#define ITER 0x008 +#define CER 0x00C +#define CCR 0x010 +#define RXFFR 0x014 +#define TXFFR 0x018 + +/* I2STxRxRegisters for all channels */ +#define LRBR_LTHR(x) (0x40 * x + 0x020) +#define RRBR_RTHR(x) (0x40 * x + 0x024) +#define RER(x) (0x40 * x + 0x028) +#define TER(x) (0x40 * x + 0x02C) +#define RCR(x) (0x40 * x + 0x030) +#define TCR(x) (0x40 * x + 0x034) +#define ISR(x) (0x40 * x + 0x038) +#define IMR(x) (0x40 * x + 0x03C) +#define ROR(x) (0x40 * x + 0x040) +#define TOR(x) (0x40 * x + 0x044) +#define RFCR(x) (0x40 * x + 0x048) +#define TFCR(x) (0x40 * x + 0x04C) +#define RFF(x) (0x40 * x + 0x050) +#define TFF(x) (0x40 * x + 0x054) + +/* I2SCOMPRegisters */ +#define I2S_COMP_PARAM_2 0x01F0 +#define I2S_COMP_PARAM_1 0x01F4 +#define I2S_COMP_VERSION 0x01F8 +#define I2S_COMP_TYPE 0x01FC + +/* + * Component parameter register fields - define the I2S block's + * configuration. + */ +#define COMP1_TX_WORDSIZE_3(r) (((r) & GENMASK(27, 25)) >> 25) +#define COMP1_TX_WORDSIZE_2(r) (((r) & GENMASK(24, 22)) >> 22) +#define COMP1_TX_WORDSIZE_1(r) (((r) & GENMASK(21, 19)) >> 19) +#define COMP1_TX_WORDSIZE_0(r) (((r) & GENMASK(18, 16)) >> 16) +#define COMP1_TX_CHANNELS(r) (((r) & GENMASK(10, 9)) >> 9) +#define COMP1_RX_CHANNELS(r) (((r) & GENMASK(8, 7)) >> 7) +#define COMP1_RX_ENABLED(r) (((r) & BIT(6)) >> 6) +#define COMP1_TX_ENABLED(r) (((r) & BIT(5)) >> 5) +#define COMP1_MODE_EN(r) (((r) & BIT(4)) >> 4) +#define COMP1_FIFO_DEPTH_GLOBAL(r) (((r) & GENMASK(3, 2)) >> 2) +#define COMP1_APB_DATA_WIDTH(r) (((r) & GENMASK(1, 0)) >> 0) + +#define COMP2_RX_WORDSIZE_3(r) (((r) & GENMASK(12, 10)) >> 10) +#define COMP2_RX_WORDSIZE_2(r) (((r) & GENMASK(9, 7)) >> 7) +#define COMP2_RX_WORDSIZE_1(r) (((r) & GENMASK(5, 3)) >> 3) +#define COMP2_RX_WORDSIZE_0(r) (((r) & GENMASK(2, 0)) >> 0) + +/* Number of entries in WORDSIZE and DATA_WIDTH parameter registers */ +#define COMP_MAX_WORDSIZE (1 << 3) +#define COMP_MAX_DATA_WIDTH (1 << 2) + +#define MAX_CHANNEL_NUM 8 +#define MIN_CHANNEL_NUM 2 + +union dw_i2s_snd_dma_data { + struct i2s_dma_data pd; + struct snd_dmaengine_dai_dma_data dt; +}; + +struct dw_i2s_dev { + void __iomem *i2s_base; + struct clk *clk; + int active; + unsigned int capability; + unsigned int quirks; + unsigned int i2s_reg_comp1; + unsigned int i2s_reg_comp2; + struct device *dev; + u32 ccr; + u32 xfer_resolution; + u32 fifo_th; + + /* data related to DMA transfers b/w i2s and DMAC */ + union dw_i2s_snd_dma_data play_dma_data; + union dw_i2s_snd_dma_data capture_dma_data; + struct i2s_clk_config_data config; + int (*i2s_clk_cfg)(struct i2s_clk_config_data *config); + + /* data related to PIO transfers (TX) */ + bool use_pio; + struct snd_pcm_substream __rcu *tx_substream; + unsigned int (*tx_fn)(struct dw_i2s_dev *dev, + struct snd_pcm_runtime *runtime, unsigned int tx_ptr, + bool *period_elapsed); + unsigned int tx_ptr; +}; + +#if IS_ENABLED(CONFIG_SND_DESIGNWARE_PCM) +void dw_pcm_push_tx(struct dw_i2s_dev *dev); +int dw_pcm_register(struct platform_device *pdev); +#else +void dw_pcm_push_tx(struct dw_i2s_dev *dev) { } +int dw_pcm_register(struct platform_device *pdev) +{ + return -EINVAL; +} +#endif + +#endif
On Mon, May 30, 2016 at 10:53:15AM +0100, Jose Abreu wrote:
A few small things but this looks basically fine.
if (isr[i] & 0x33)
irq_valid = true;
This checks for a mask of 0x33 but...
/*
* Check if TX fifo is empty. If empty fill FIFO with samples
* NOTE: Only two channels supported
*/
if ((isr[i] & 0x10) && (i == 0) && dev->use_pio)
dw_pcm_push_tx(dev);
/* Error Handling */
if (isr[i] & 0x20)
dev_err(dev->dev, "TX overrun (ch_id=%d)\n", i);
if (isr[i] & 0x02)
dev_err(dev->dev, "RX overrun (ch_id=%d)\n", i);
...only 0x32 seem to actually be handled, and then only sometimes. It's going to be clearer and more robust to just set the handled flag to true when handling, that way we don't have to match up different numerical masks. Some defines would help legibility too.
- ret = snd_pcm_lib_malloc_pages(substream,
params_buffer_bytes(hw_params));
- return (ret < 0) ? ret : 0;
Write normal if statements please, it helps legibility.
A parameter description for the interruptions of the I2S controller was added.
Signed-off-by: Jose Abreu joabreu@synopsys.com Acked-by: Rob Herring robh@kernel.org Cc: Carlos Palminha palminha@synopsys.com Cc: Mark Brown broonie@kernel.org Cc: Liam Girdwood lgirdwood@gmail.com Cc: Jaroslav Kysela perex@perex.cz Cc: Takashi Iwai tiwai@suse.com Cc: Rob Herring robh@kernel.org Cc: Alexey Brodkin abrodkin@synopsys.com Cc: linux-snps-arc@lists.infradead.org Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org ---
No changes v7 -> v8.
Changes v6 -> v7: * interrupts is now optional property
No changes v5 -> v6.
Changes v4 -> v5: * interrupts is now required property * Drop 'snps-use-dmaengine' property
This patch was only introduced in v4.
Documentation/devicetree/bindings/sound/designware-i2s.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt index 7bb5424..6a536d5 100644 --- a/Documentation/devicetree/bindings/sound/designware-i2s.txt +++ b/Documentation/devicetree/bindings/sound/designware-i2s.txt @@ -12,6 +12,10 @@ Required properties: one for receive. - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
+Optional properties: + - interrupts: The interrupt line number for the I2S controller. Add this + parameter if the I2S controller that you are using does not support DMA. + For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties please check: * resource-names.txt
participants (2)
-
Jose Abreu
-
Mark Brown