When digital microphones are connected to twl, delay is needed after enabling the digimic interface of the codec. Add new parameter for the setup data, which can be used to pass the apropriate delay in ms after the digimic interface has been enabled.

Without certain delay (in certain HW configuration) the beggining of the recorded sample contains a glitch, which is generated by the digital microphones.

Delaying the micbias1, 2 (which is the bias for the digimic0 or 1) does not help, since the glitch is coming after switching the digimic interface.

Reversing the micbias and digimic enable order does not work either (in that case the wait need to be added after the micbias enabled).

Signed-off-by: Peter Ujfalusi peter.ujfalusi@nokia.com ---

Hello,

I have been looking after this problem for a year now (with low priority), and finally I did figured out what is caused the glitch at the beginning of the recording via the digimic interface.

Adding platform dependent delay after enabling the digimic interface fixes the issue I am tracking, in other HW setups with different components the delay might not be needed.

Peter

sound/soc/codecs/twl4030.c | 25 +++++++++++++++++++++---- sound/soc/codecs/twl4030.h | 1 + 2 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index 6fd6d0b..bd557c2 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -143,6 +143,9 @@ struct twl4030_priv { u8 earpiece_enabled; u8 predrivel_enabled, predriver_enabled; u8 carkitl_enabled, carkitr_enabled; + + /* Delay needed after enabling the digimic interface */ + unsigned int digimic_delay; };

/* @@ -312,6 +315,8 @@ static void twl4030_init_chip(struct platform_device *pdev) if (!setup) return;

+ twl4030->digimic_delay = setup->digimic_delay; + /* Configuration for headset ramp delay from setup data */ if (setup->sysclk != twl4030->sysclk) dev_warn(codec->dev, @@ -855,6 +860,16 @@ static int headsetrpga_event(struct snd_soc_dapm_widget *w, return 0; }

+static int digimic_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct twl4030_priv *twl4030 = snd_soc_codec_get_drvdata(w->codec); + + if (twl4030->digimic_delay) + mdelay(twl4030->digimic_delay); + return 0; +} + /* * Some of the gain controls in TWL (mostly those which are associated with * the outputs) are implemented in an interesting way: @@ -1439,10 +1454,12 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { SND_SOC_DAPM_PGA("ADC Physical Right", TWL4030_REG_AVADC_CTL, 1, 0, NULL, 0),

- SND_SOC_DAPM_PGA("Digimic0 Enable", - TWL4030_REG_ADCMICSEL, 1, 0, NULL, 0), - SND_SOC_DAPM_PGA("Digimic1 Enable", - TWL4030_REG_ADCMICSEL, 3, 0, NULL, 0), + SND_SOC_DAPM_PGA_E("Digimic0 Enable", + TWL4030_REG_ADCMICSEL, 1, 0, NULL, 0, + digimic_event, SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_PGA_E("Digimic1 Enable", + TWL4030_REG_ADCMICSEL, 3, 0, NULL, 0, + digimic_event, SND_SOC_DAPM_POST_PMU),

SND_SOC_DAPM_MICBIAS("Mic Bias 1", TWL4030_REG_MICBIAS_CTL, 0, 0), SND_SOC_DAPM_MICBIAS("Mic Bias 2", TWL4030_REG_MICBIAS_CTL, 1, 0), diff --git a/sound/soc/codecs/twl4030.h b/sound/soc/codecs/twl4030.h index 788e3d1..6c57430 100644 --- a/sound/soc/codecs/twl4030.h +++ b/sound/soc/codecs/twl4030.h @@ -41,6 +41,7 @@ extern struct snd_soc_codec_device soc_codec_dev_twl4030;

struct twl4030_setup_data { unsigned int ramp_delay_value; + unsigned int digimic_delay; /* in ms */ unsigned int sysclk; unsigned int offset_cncl_path; unsigned int check_defaults:1;