[PATCH v4] ASoC: dt-bindings: alc5632: Convert to dtschema
Convert the ALC5632 audio codec bindings to DT schema.
Signed-off-by: Saalim Quadri danascape@gmail.com --- Changes: V1 -> V2: Use correct node name V2 -> V3: Add correct maintainer name V3 -> V4: Drop alc5632 label name
.../devicetree/bindings/sound/alc5632.txt | 43 ------------- .../bindings/sound/realtek,alc5632.yaml | 63 +++++++++++++++++++ 2 files changed, 63 insertions(+), 43 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/alc5632.txt create mode 100644 Documentation/devicetree/bindings/sound/realtek,alc5632.yaml
diff --git a/Documentation/devicetree/bindings/sound/alc5632.txt b/Documentation/devicetree/bindings/sound/alc5632.txt deleted file mode 100644 index ffd886d110bd..000000000000 --- a/Documentation/devicetree/bindings/sound/alc5632.txt +++ /dev/null @@ -1,43 +0,0 @@ -ALC5632 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "realtek,alc5632" - - - reg : the I2C address of the device. - - - gpio-controller : Indicates this device is a GPIO controller. - - - #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). - -Pins on the device (for linking into audio routes): - - * SPK_OUTP - * SPK_OUTN - * HP_OUT_L - * HP_OUT_R - * AUX_OUT_P - * AUX_OUT_N - * LINE_IN_L - * LINE_IN_R - * PHONE_P - * PHONE_N - * MIC1_P - * MIC1_N - * MIC2_P - * MIC2_N - * MICBIAS1 - * DMICDAT - -Example: - -alc5632: alc5632@1e { - compatible = "realtek,alc5632"; - reg = <0x1a>; - - gpio-controller; - #gpio-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/sound/realtek,alc5632.yaml b/Documentation/devicetree/bindings/sound/realtek,alc5632.yaml new file mode 100644 index 000000000000..fb05988ff7ea --- /dev/null +++ b/Documentation/devicetree/bindings/sound/realtek,alc5632.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,alc5632.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ALC5632 audio CODEC + +description: | + Pins on the device (for linking into audio routes): + * SPK_OUTP + * SPK_OUTN + * HP_OUT_L + * HP_OUT_R + * AUX_OUT_P + * AUX_OUT_N + * LINE_IN_L + * LINE_IN_R + * PHONE_P + * PHONE_N + * MIC1_P + * MIC1_N + * MIC2_P + * MIC2_N + * MICBIAS1 + * DMICDAT + +maintainers: + - Leon Romanovsky leon@leon.nu + +properties: + compatible: + const: realtek,alc5632 + + reg: + maxItems: 1 + + '#gpio-cells': + const: 2 + + gpio-controller: true + +required: + - compatible + - reg + - '#gpio-cells' + - gpio-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + compatible = "realtek,alc5632"; + reg = <0x1a>; + gpio-controller; + #gpio-cells = <2>; + }; + };
On 27/03/2023 23:16, Saalim Quadri wrote:
Convert the ALC5632 audio codec bindings to DT schema.
Signed-off-by: Saalim Quadri danascape@gmail.com
I wanted to review it but for some reason you keep ignoring my comment. So one more time:
Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel.
Is there something not clear about my request above?
Best regards, Krzysztof
Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel.
Apologies but, this is the output of get_maintainers.pl, is there something that I missed?
I am currently working no 6.3-rc3 as my base kernel.
saalim@pavilion:~/workspace/linux$ scripts/get_maintainer.pl Documentation/devicetree/bindings/sound/alc5632.txt Liam Girdwood lgirdwood@gmail.com (supporter:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM...) Mark Brown broonie@kernel.org (supporter:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM...) Rob Herring robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) Krzysztof Kozlowski krzysztof.kozlowski+dt@linaro.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) alsa-devel@alsa-project.org (moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM...) devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) linux-kernel@vger.kernel.org (open list)
Thank you,
Saalim
On 28/03/2023 10:33, Saalim Quadri wrote:
Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel.
Apologies but, this is the output of get_maintainers.pl, is there something that I missed?
I am currently working no 6.3-rc3 as my base kernel.
saalim@pavilion:~/workspace/linux$ scripts/get_maintainer.pl Documentation/devicetree/bindings/sound/alc5632.txt
It's not the correct way to run it. It should not even work at all - there is no alc5632.txt file, so I really doubt you run it exactly like this. Anyway:
git format-patch -1 -5 scripts/get_maintainer.pl v5-*
and you will get a bit different results.
Best regards, Krzysztof
git format-patch -1 -5 scripts/get_maintainer.pl v5-* and you will get a bit different results.
There was a new entry this time, while the rest of the output was same. Leon Romanovsky leon@kernel.org (in file)
I added him as a CC here
Thank you,
Saalim
On Tue, 28 Mar 2023 02:46:29 +0530, Saalim Quadri wrote:
Convert the ALC5632 audio codec bindings to DT schema.
Applied to
broonie/sound.git for-next
Thanks!
[1/1] ASoC: dt-bindings: alc5632: Convert to dtschema commit: 0b57a2d87b4de2a1f01edaf3b00b3d1939792948
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (3)
-
Krzysztof Kozlowski -
Mark Brown -
Saalim Quadri