fixed coding style issues 6 warnings and 1 error

left two warnings alone because I was unsure about changing the logic and felt the 80 + character line necessary sound/soc/codecs/rt5645.c:702: WARNING: else is not generally useful after a break or return sound/soc/codecs/rt5645.c:3024: WARNING: line over 80 characters

Signed-off-by: Chris Gorman chrisjohgorman@bell.net --- sound/soc/codecs/rt5645.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 87844a4..7c14317 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3021,7 +3021,7 @@ static int rt5645_set_bias_level(struct snd_soc_codec *codec,

switch (level) { case SND_SOC_BIAS_PREPARE: - if (SND_SOC_BIAS_STANDBY == snd_soc_codec_get_bias_level(codec)) { + if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_STANDBY) { snd_soc_update_bits(codec, RT5645_PWR_ANLG1, RT5645_PWR_VREF1 | RT5645_PWR_MB | RT5645_PWR_BG | RT5645_PWR_VREF2, @@ -3117,7 +3117,8 @@ static int rt5645_jack_detect(struct snd_soc_codec *codec, int jack_insert) snd_soc_dapm_sync(dapm); if (!dapm->card->instantiated) { /* Power up necessary bits for JD if dapm is - not ready yet */ + * not ready yet + */ regmap_update_bits(rt5645->regmap, RT5645_PWR_ANLG1, RT5645_PWR_MB | RT5645_PWR_VREF2, RT5645_PWR_MB | RT5645_PWR_VREF2); @@ -3143,9 +3144,8 @@ static int rt5645_jack_detect(struct snd_soc_codec *codec, int jack_insert)

if (val == 1 || val == 2) { rt5645->jack_type = SND_JACK_HEADSET; - if (rt5645->en_button_func) { + if (rt5645->en_button_func) rt5645_enable_push_button_irq(codec, true); - } } else { snd_soc_dapm_disable_pin(dapm, "Mic Det Power"); snd_soc_dapm_sync(dapm); @@ -3262,10 +3262,11 @@ static void rt5645_jack_detect_work(struct work_struct *work) report = SND_JACK_HEADSET; btn_type = rt5645_button_detect(rt5645->codec); /* rt5650 can report three kinds of button behavior, - one click, double click and hold. However, - currently we will report button pressed/released - event. So all the three button behaviors are - treated as button pressed. */ + * one click, double click and hold. However, + * currently we will report button pressed/released + * event. So all the three button behaviors are + * treated as button pressed. + */ switch (btn_type) { case 0x8000: case 0x4000: @@ -3527,7 +3528,7 @@ static const struct regmap_config rt5650_regmap = { };

static const struct regmap_config temp_regmap = { - .name="nocache", + .name = "nocache", .reg_bits = 8, .val_bits = 16, .use_single_rw = true,