The patch

ASoC: sgtl5000: Allow SCLK pad drive strength to be changed

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks, Mark

From 5dc4ca2996840db569e43d00420c10499140274a Mon Sep 17 00:00:00 2001

From: Alison Wang alison.wang@nxp.com Date: Wed, 26 Dec 2018 08:59:53 +0800 Subject: [PATCH] ASoC: sgtl5000: Allow SCLK pad drive strength to be changed

This patch introduces "sclk-strength" property to allow SCLK pad drive strength to be changed via device tree.

When running playback test on LS1028ARDB, Tx Frame sync error interrupt will occur sometimes. Some noises also exist. After changing SCLK pad drive strength to the maximum value, the issues are gone.

Signed-off-by: Alison Wang alison.wang@nxp.com Signed-off-by: Mark Brown broonie@kernel.org --- .../devicetree/bindings/sound/sgtl5000.txt | 9 +++++++++ sound/soc/codecs/sgtl5000.c | 19 ++++++++++++++++++- 2 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 9c58f724396a..9d9ff5184939 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -37,6 +37,15 @@ VDDIO 1.8V 2.5V 3.3V 2 = 3.33 mA 5.74 mA 8.03 mA 3 = 4.99 mA 8.61 mA 12.05 mA

+- sclk-strength: the SCLK pad strength. Possible values are: +0, 1, 2 and 3 as per the table below: + +VDDIO 1.8V 2.5V 3.3V +0 = Disable +1 = 1.66 mA 2.87 mA 4.02 mA +2 = 3.33 mA 5.74 mA 8.03 mA +3 = 4.99 mA 8.61 mA 12.05 mA + Example:

sgtl5000: codec@a { diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index add18d6d77da..a6a4748c97f9 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -116,6 +116,13 @@ enum { I2S_LRCLK_STRENGTH_HIGH, };

+enum { + I2S_SCLK_STRENGTH_DISABLE, + I2S_SCLK_STRENGTH_LOW, + I2S_SCLK_STRENGTH_MEDIUM, + I2S_SCLK_STRENGTH_HIGH, +}; + /* sgtl5000 private structure in codec */ struct sgtl5000_priv { int sysclk; /* sysclk rate */ @@ -129,6 +136,7 @@ struct sgtl5000_priv { u8 micbias_resistor; u8 micbias_voltage; u8 lrclk_strength; + u8 sclk_strength; };

/* @@ -1302,7 +1310,9 @@ static int sgtl5000_probe(struct snd_soc_component *component) SGTL5000_DAC_MUTE_RIGHT | SGTL5000_DAC_MUTE_LEFT);

- reg = ((sgtl5000->lrclk_strength) << SGTL5000_PAD_I2S_LRCLK_SHIFT | 0x5f); + reg = ((sgtl5000->lrclk_strength) << SGTL5000_PAD_I2S_LRCLK_SHIFT | + (sgtl5000->sclk_strength) << SGTL5000_PAD_I2S_SCLK_SHIFT | + 0x1f); snd_soc_component_write(component, SGTL5000_CHIP_PAD_STRENGTH, reg);

snd_soc_component_write(component, SGTL5000_CHIP_ANA_CTRL, @@ -1542,6 +1552,13 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, sgtl5000->lrclk_strength = value; }

+ sgtl5000->sclk_strength = I2S_SCLK_STRENGTH_LOW; + if (!of_property_read_u32(np, "sclk-strength", &value)) { + if (value > I2S_SCLK_STRENGTH_HIGH) + value = I2S_SCLK_STRENGTH_LOW; + sgtl5000->sclk_strength = value; + } + /* Ensure sgtl5000 will start with sane register values */ sgtl5000_fill_defaults(client);