aic3x_init does a soft reset first and thus TLV320AIC3x GPIO setup must be done after doing the basic init. Before multi-component the init was done at i2c probe time and GPIO setup at soc probe time.

Signed-off-by: Jarkko Nikula jhnikula@gmail.com Acked-by: Mark Brown broonie@opensource.wolfsonmicro.com --- This got lost during multi-component work. Now rebased on recent aix3x changes so that applies with git am. I took freedom to add Mark's acked-by, see: http://mailman.alsa-project.org/pipermail/alsa-devel/2010-August/030278.html --- sound/soc/codecs/tlv320aic3x.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index c074657..efae8b5 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1281,6 +1281,8 @@ static int aic3x_probe(struct snd_soc_codec *codec) codec->hw_write = (hw_write_t) i2c_master_send; codec->control_data = aic3x->control_data;

+ aic3x_init(codec); + if (aic3x->setup) { /* setup GPIO functions */ aic3x_write(codec, AIC3X_GPIO1_REG, @@ -1289,8 +1291,6 @@ static int aic3x_probe(struct snd_soc_codec *codec) (aic3x->setup->gpio_func[1] & 0xf) << 4); }

- aic3x_init(codec); - snd_soc_add_controls(codec, aic3x_snd_controls, ARRAY_SIZE(aic3x_snd_controls)); if (aic3x->model == AIC3X_MODEL_3007)