From: Krzysztof Helt krzysztof.h1@wp.pl

Remove snd_opti9xx fields which are indirect arguments to the snd_opti9xx_configure(). Pass these values as function arguments.

Signed-off-by: Krzysztof Helt krzysztof.h1@wp.pl --- This patch prepares a driver for a better fix to the irq problem.

sound/isa/opti9xx/opti92x-ad1848.c | 110 ++++++++++++++---------------------- 1 files changed, 43 insertions(+), 67 deletions(-)

diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 5cd5553..d08c389 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -141,15 +141,7 @@ struct snd_opti9xx {

spinlock_t lock;

- long wss_base; int irq; - int dma1; - int dma2; - - long fm_port; - - long mpu_port; - int mpu_irq;

#ifdef CONFIG_PNP struct pnp_dev *dev; @@ -216,13 +208,7 @@ static int __devinit snd_opti9xx_init(struct snd_opti9xx *chip,

spin_lock_init(&chip->lock);

- chip->wss_base = -1; chip->irq = -1; - chip->dma1 = -1; - chip->dma2 = -1; - chip->fm_port = -1; - chip->mpu_port = -1; - chip->mpu_irq = -1;

switch (hardware) { #ifndef OPTi93X @@ -348,7 +334,10 @@ static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg, (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))

-static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip) +static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip, + long wss_base, + int irq, int dma1, int dma2, + long mpu_port, int mpu_irq) { unsigned char wss_base_bits; unsigned char irq_bits; @@ -416,7 +405,7 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip) return -EINVAL; }

- switch (chip->wss_base) { + switch (wss_base) { case 0x530: wss_base_bits = 0x00; break; @@ -430,14 +419,13 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip) wss_base_bits = 0x02; break; default: - snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", - chip->wss_base); + snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", wss_base); goto __skip_base; } snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30);

__skip_base: - switch (chip->irq) { + switch (irq) { //#ifdef OPTi93X case 5: irq_bits = 0x05; @@ -456,11 +444,11 @@ __skip_base: irq_bits = 0x04; break; default: - snd_printk(KERN_WARNING "WSS irq # %d not valid\n", chip->irq); + snd_printk(KERN_WARNING "WSS irq # %d not valid\n", irq); goto __skip_resources; }

- switch (chip->dma1) { + switch (dma1) { case 0: dma_bits = 0x01; break; @@ -471,38 +459,36 @@ __skip_base: dma_bits = 0x03; break; default: - snd_printk(KERN_WARNING "WSS dma1 # %d not valid\n", - chip->dma1); + snd_printk(KERN_WARNING "WSS dma1 # %d not valid\n", dma1); goto __skip_resources; }

#if defined(CS4231) || defined(OPTi93X) - if (chip->dma1 == chip->dma2) { + if (dma1 == dma2) { snd_printk(KERN_ERR "don't want to share dmas\n"); return -EBUSY; }

- switch (chip->dma2) { + switch (dma2) { case 0: case 1: break; default: - snd_printk(KERN_WARNING "WSS dma2 # %d not valid\n", - chip->dma2); + snd_printk(KERN_WARNING "WSS dma2 # %d not valid\n", dma2); goto __skip_resources; } dma_bits |= 0x04; #endif /* CS4231 || OPTi93X */

#ifndef OPTi93X - outb(irq_bits << 3 | dma_bits, chip->wss_base); + outb(irq_bits << 3 | dma_bits, wss_base); #else /* OPTi93X */ snd_opti9xx_write(chip, OPTi9XX_MC_REG(3), (irq_bits << 3 | dma_bits)); #endif /* OPTi93X */

__skip_resources: if (chip->hardware > OPTi9XX_HW_82C928) { - switch (chip->mpu_port) { + switch (mpu_port) { case 0: case -1: break; @@ -520,12 +506,11 @@ __skip_resources: break; default: snd_printk(KERN_WARNING - "MPU-401 port 0x%lx not valid\n", - chip->mpu_port); + "MPU-401 port 0x%lx not valid\n", mpu_port); goto __skip_mpu; }

- switch (chip->mpu_irq) { + switch (mpu_irq) { case 5: mpu_irq_bits = 0x02; break; @@ -540,12 +525,12 @@ __skip_resources: break; default: snd_printk(KERN_WARNING "MPU-401 irq # %d not valid\n", - chip->mpu_irq); + mpu_irq); goto __skip_mpu; }

snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(6), - (chip->mpu_port <= 0) ? 0x00 : + (mpu_port <= 0) ? 0x00 : 0x80 | mpu_port_bits << 5 | mpu_irq_bits << 3, 0xf8); } @@ -701,6 +686,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) { static long possible_ports[] = {0x530, 0xe80, 0xf40, 0x604, -1}; int error; + int xdma2; struct snd_opti9xx *chip = card->private_data; struct snd_wss *codec; #ifdef CS4231 @@ -715,31 +701,25 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) "OPTi9xx MC")) == NULL) return -ENOMEM;

- chip->wss_base = port; - chip->fm_port = fm_port; - chip->mpu_port = mpu_port; - chip->irq = irq; - chip->mpu_irq = mpu_irq; - chip->dma1 = dma1; #if defined(CS4231) || defined(OPTi93X) - chip->dma2 = dma2; + xdma2 = dma2; #else - chip->dma2 = -1; + xdma2 = -1; #endif

- if (chip->wss_base == SNDRV_AUTO_PORT) { - chip->wss_base = snd_legacy_find_free_ioport(possible_ports, 4); - if (chip->wss_base < 0) { + if (port == SNDRV_AUTO_PORT) { + port = snd_legacy_find_free_ioport(possible_ports, 4); + if (port < 0) { snd_printk(KERN_ERR "unable to find a free WSS port\n"); return -EBUSY; } } - error = snd_opti9xx_configure(chip); + error = snd_opti9xx_configure(chip, port, irq, dma1, xdma2, + mpu_port, mpu_irq); if (error) return error;

- error = snd_wss_create(card, chip->wss_base + 4, -1, - chip->irq, chip->dma1, chip->dma2, + error = snd_wss_create(card, port + 4, -1, irq, dma1, xdma2, #ifdef OPTi93X WSS_HW_OPTI93X, WSS_HWSHARE_IRQ, #else @@ -763,35 +743,35 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) return error; #endif #ifdef OPTi93X - error = request_irq(chip->irq, snd_opti93x_interrupt, + error = request_irq(irq, snd_opti93x_interrupt, IRQF_DISABLED, DEV_NAME" - WSS", codec); if (error < 0) { snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", chip->irq); return error; } #endif + chip->irq = irq; strcpy(card->driver, chip->name); sprintf(card->shortname, "OPTi %s", card->driver); #if defined(CS4231) || defined(OPTi93X) sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d", - card->shortname, pcm->name, chip->wss_base + 4, - chip->irq, chip->dma1, chip->dma2); + card->shortname, pcm->name, port + 4, irq, dma1, xdma2); #else sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d", - card->shortname, pcm->name, chip->wss_base + 4, - chip->irq, chip->dma1); + card->shortname, pcm->name, port + 4, irq, dma1); #endif /* CS4231 || OPTi93X */

- if (chip->mpu_port <= 0 || chip->mpu_port == SNDRV_AUTO_PORT) + if (mpu_port <= 0 || mpu_port == SNDRV_AUTO_PORT) rmidi = NULL; - else - if ((error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, - chip->mpu_port, 0, chip->mpu_irq, IRQF_DISABLED, - &rmidi))) + else { + error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, + mpu_port, 0, mpu_irq, IRQF_DISABLED, &rmidi); + if (error) snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n", - chip->mpu_port); + mpu_port); + }

- if (chip->fm_port > 0 && chip->fm_port != SNDRV_AUTO_PORT) { + if (fm_port > 0 && fm_port != SNDRV_AUTO_PORT) { struct snd_opl3 *opl3 = NULL; #ifndef OPTi93X if (chip->hardware == OPTi9XX_HW_82C928 || @@ -801,9 +781,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) /* assume we have an OPL4 */ snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2), 0x20, 0x20); - if (snd_opl4_create(card, - chip->fm_port, - chip->fm_port - 8, + if (snd_opl4_create(card, fm_port, fm_port - 8, 2, &opl3, &opl4) < 0) { /* no luck, use OPL3 instead */ snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2), @@ -811,12 +789,10 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) } } #endif /* !OPTi93X */ - if (!opl3 && snd_opl3_create(card, - chip->fm_port, - chip->fm_port + 2, + if (!opl3 && snd_opl3_create(card, fm_port, fm_port + 2, OPL3_HW_AUTO, 0, &opl3) < 0) { snd_printk(KERN_WARNING "no OPL device at 0x%lx-0x%lx\n", - chip->fm_port, chip->fm_port + 4 - 1); + fm_port, fm_port + 4 - 1); } if (opl3) { error = snd_opl3_hwdep_new(opl3, 0, 1, &synth);