[alsa-devel] [PATCH] ad1848/cs4231: replace commented out debug code with snd-printd{, d}
Hi Takashi.
While I'm at it another "while I'm there" -- replace commented out debug code with snd-printd{,d}.
(I saw Krysztof was busy tweaking the sleeping granularity in these functions, so I'm leaving the code alone after this).
Rene.
diff --git a/sound/isa/ad1848/ad1848_lib.c b/sound/isa/ad1848/ad1848_lib.c index 161da11..ace2a9b 100644 --- a/sound/isa/ad1848/ad1848_lib.c +++ b/sound/isa/ad1848/ad1848_lib.c @@ -211,13 +211,14 @@ static void snd_ad1848_mce_down(struct snd_ad1848 *chip) /* end of cleanup sequence */ for (timeout = 12000; timeout > 0 && (inb(AD1848P(chip, REGSEL)) & AD1848_INIT); timeout--) udelay(100); -#if 0 - printk("(1) timeout = %i\n", timeout); -#endif + + snd_printdd("(1) timeout = %d\n", timeout); + #ifdef CONFIG_SND_DEBUG if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) snd_printk(KERN_WARNING "mce_down [0x%lx] - auto calibration time out (0)\n", AD1848P(chip, REGSEL)); #endif + chip->mce_bit &= ~AD1848_MCE; timeout = inb(AD1848P(chip, REGSEL)); outb(chip->mce_bit | (timeout & 0x1f), AD1848P(chip, REGSEL)); @@ -234,9 +235,9 @@ static void snd_ad1848_mce_down(struct snd_ad1848 *chip) * which at the slowest possible rate of 5.5125 kHz means 907 us. */ msleep(1); -#if 0 - printk("(2) jiffies = %li\n", jiffies); -#endif + + snd_printdd("(2) jiffies = %lu\n", jiffies); + time = msecs_to_jiffies(250); while (snd_ad1848_in(chip, AD1848_TEST_INIT) & AD1848_CALIB_IN_PROGRESS) { spin_unlock_irqrestore(&chip->reg_lock, flags); @@ -247,9 +248,9 @@ static void snd_ad1848_mce_down(struct snd_ad1848 *chip) time = schedule_timeout_interruptible(time); spin_lock_irqsave(&chip->reg_lock, flags); } -#if 0 - printk("(3) jiffies = %li\n", jiffies); -#endif + + snd_printdd("(3) jiffies = %lu\n", jiffies); + time = msecs_to_jiffies(100); while (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) { spin_unlock_irqrestore(&chip->reg_lock, flags); @@ -261,10 +262,9 @@ static void snd_ad1848_mce_down(struct snd_ad1848 *chip) spin_lock_irqsave(&chip->reg_lock, flags); } spin_unlock_irqrestore(&chip->reg_lock, flags); -#if 0 - printk("(4) jiffies = %li\n", jiffies); - snd_printk("mce_down - exit = 0x%x\n", inb(AD1848P(chip, REGSEL))); -#endif + + snd_printdd("(4) jiffies = %lu\n", jiffies); + snd_printd("mce_down - exit = 0x%x\n", inb(AD1848P(chip, REGSEL))); }
static unsigned int snd_ad1848_get_count(unsigned char format, diff --git a/sound/isa/cs423x/cs4231_lib.c b/sound/isa/cs423x/cs4231_lib.c index 9e8e0f1..d3a7b59 100644 --- a/sound/isa/cs423x/cs4231_lib.c +++ b/sound/isa/cs423x/cs4231_lib.c @@ -326,9 +326,7 @@ void snd_cs4231_mce_down(struct snd_cs4231 *chip) int timeout;
snd_cs4231_busy_wait(chip); -#if 0 - printk("(1) timeout = %i\n", timeout); -#endif + #ifdef CONFIG_SND_DEBUG if (cs4231_inb(chip, CS4231P(REGSEL)) & CS4231_INIT) snd_printk("mce_down [0x%lx] - auto calibration time out (0)\n", (long)CS4231P(REGSEL)); @@ -352,9 +350,9 @@ void snd_cs4231_mce_down(struct snd_cs4231 *chip) * which at the slowest possible rate of 5.5125 kHz means 907 us. */ msleep(1); -#if 0 - printk("(2) jiffies = %li\n", jiffies); -#endif + + snd_printdd("(1) jiffies = %lu\n", jiffies); + /* in 10 ms increments, check condition, up to 250 ms */ timeout = 25; while (snd_cs4231_in(chip, CS4231_TEST_INIT) & CS4231_CALIB_IN_PROGRESS) { @@ -364,9 +362,9 @@ void snd_cs4231_mce_down(struct snd_cs4231 *chip) } msleep(10); } -#if 0 - printk("(3) jiffies = %li\n", jiffies); -#endif + + snd_printdd("(2) jiffies = %lu\n", jiffies); + /* in 10 ms increments, check condition, up to 100 ms */ timeout = 10; while (cs4231_inb(chip, CS4231P(REGSEL)) & CS4231_INIT) { @@ -376,10 +374,9 @@ void snd_cs4231_mce_down(struct snd_cs4231 *chip) } msleep(10); } -#if 0 - printk("(4) jiffies = %li\n", jiffies); - snd_printk("mce_down - exit = 0x%x\n", cs4231_inb(chip, CS4231P(REGSEL))); -#endif + + snd_printdd("(3) jiffies = %lu\n", jiffies); + snd_printd("mce_down - exit = 0x%x\n", cs4231_inb(chip, CS4231P(REGSEL))); }
static unsigned int snd_cs4231_get_count(unsigned char format, unsigned int size)
On 09/10/2007 09:06 PM, Rene Herman wrote:
While I'm at it another "while I'm there" -- replace commented out debug code with snd-printd{,d}.
(I saw Krysztof was busy tweaking the sleeping granularity in these functions, so I'm leaving the code alone after this).
Signed-off-by: Rene Herman rene.herman@gmail.com
Rene.
At Mon, 10 Sep 2007 21:08:58 +0200, Rene Herman wrote:
On 09/10/2007 09:06 PM, Rene Herman wrote:
While I'm at it another "while I'm there" -- replace commented out debug code with snd-printd{,d}.
(I saw Krysztof was busy tweaking the sleeping granularity in these functions, so I'm leaving the code alone after this).
Signed-off-by: Rene Herman rene.herman@gmail.com
OK, these three patches are all applied now. Thanks.
Takashi
participants (2)
-
Rene Herman
-
Takashi Iwai