[alsa-devel] ALSA HDA problem with 64-bit kernels
Heip!
I recently moved to 64-bit kernel, but mixed sounds (ie. mpegs played with a media player) don't work with optical S/PDIF connection. AC3/DTS passthrough still works, and I can hear the mixed sounds on analog connector. And yes, I have unmuted the IEC958 mixer setting.
Tested kernels:
ALSA 1.0.14: 2.6.23.1 32bit: works 2.6.23.1 64bit: broken 2.6.23.12 64bit: broken 2.6.23.12 64bit kernel, 32bit userspace: broken
ALSA 1.0.15: 2.6.24-rc6 64bit: broken (and half of the mixer settings are missing)
The soundcard is integrated to the motherboard (Abit IP35 Pro) and I can't find any more information on it than it is "7.1 CH HD Audio CODEC".
Relevant part of dmesg (it is the same for 32/64 bit versions, expect that the interrput goes to IRQ 18):
===cut dmesg Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC). ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... usbcore: registered new interface driver snd-usb-audio ALSA device list: #0: HDA Intel at 0xfdff4000 irq 22 ===cut lspci 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02) Subsystem: ABIT Computer Corp. Unknown device [147b:1083] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at fdff4000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link ===cut asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfdff4000 irq 22 ===cut
There are no differences in /proc/asound directory entries expect the cards file (different IRQ).
Any ideas how to fix this?
//T
participants (1)
-
Timo Jantunen