[alsa-devel] [PATCH v2] ASoC: sun4i-codec: use consistent names for PA controls
The power amplifier for the headphone output is called "the PA" and "the headphone amplifier" in Allwinner's documentation for the A10 and A20. sun4i-codec calls it "PA" in some places and "Pre-Amplifier" (which isn't really accurate) in others, leading to user-visible controls with different names referring to the same device.
When this driver implements audio input, it'll also need to expose controls for the line and mic input preamps, so just referring to "the Pre-Amplifier" will be ambiguous.
Change it to use "Power Amplifier" consistently for the power amplifier's controls.
Signed-off-by: Adam Sampson ats@offog.org --- Changes in v2: - use "Power Amplifier" rather than "PA" --- sound/soc/sunxi/sun4i-codec.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c index bcbf4da..1bb896d 100644 --- a/sound/soc/sunxi/sun4i-codec.c +++ b/sound/soc/sunxi/sun4i-codec.c @@ -2,6 +2,7 @@ * Copyright 2014 Emilio López emilio@elopez.com.ar * Copyright 2014 Jon Smirl jonsmirl@gmail.com * Copyright 2015 Maxime Ripard maxime.ripard@free-electrons.com + * Copyright 2015 Adam Sampson ats@offog.org * * Based on the Allwinner SDK driver, released under the GPL. * @@ -404,7 +405,7 @@ static const struct snd_kcontrol_new sun4i_codec_pa_mute = static DECLARE_TLV_DB_SCALE(sun4i_codec_pa_volume_scale, -6300, 100, 1);
static const struct snd_kcontrol_new sun4i_codec_widgets[] = { - SOC_SINGLE_TLV("PA Volume", SUN4I_CODEC_DAC_ACTL, + SOC_SINGLE_TLV("Power Amplifier Volume", SUN4I_CODEC_DAC_ACTL, SUN4I_CODEC_DAC_ACTL_PA_VOL, 0x3F, 0, sun4i_codec_pa_volume_scale), }; @@ -452,12 +453,12 @@ static const struct snd_soc_dapm_widget sun4i_codec_dapm_widgets[] = { SND_SOC_DAPM_SUPPLY("Mixer Enable", SUN4I_CODEC_DAC_ACTL, SUN4I_CODEC_DAC_ACTL_MIXEN, 0, NULL, 0),
- /* Pre-Amplifier */ - SND_SOC_DAPM_MIXER("Pre-Amplifier", SUN4I_CODEC_ADC_ACTL, + /* Power Amplifier */ + SND_SOC_DAPM_MIXER("Power Amplifier", SUN4I_CODEC_ADC_ACTL, SUN4I_CODEC_ADC_ACTL_PA_EN, 0, sun4i_codec_pa_mixer_controls, ARRAY_SIZE(sun4i_codec_pa_mixer_controls)), - SND_SOC_DAPM_SWITCH("Pre-Amplifier Mute", SND_SOC_NOPM, 0, 0, + SND_SOC_DAPM_SWITCH("Power Amplifier Mute", SND_SOC_NOPM, 0, 0, &sun4i_codec_pa_mute),
SND_SOC_DAPM_OUTPUT("HP Right"), @@ -480,16 +481,16 @@ static const struct snd_soc_dapm_route sun4i_codec_dapm_routes[] = { { "Left Mixer", NULL, "Mixer Enable" }, { "Left Mixer", "Left DAC Playback Switch", "Left DAC" },
- /* Pre-Amplifier Mixer Routes */ - { "Pre-Amplifier", "Mixer Playback Switch", "Left Mixer" }, - { "Pre-Amplifier", "Mixer Playback Switch", "Right Mixer" }, - { "Pre-Amplifier", "DAC Playback Switch", "Left DAC" }, - { "Pre-Amplifier", "DAC Playback Switch", "Right DAC" }, + /* Power Amplifier Routes */ + { "Power Amplifier", "Mixer Playback Switch", "Left Mixer" }, + { "Power Amplifier", "Mixer Playback Switch", "Right Mixer" }, + { "Power Amplifier", "DAC Playback Switch", "Left DAC" }, + { "Power Amplifier", "DAC Playback Switch", "Right DAC" },
- /* PA -> HP path */ - { "Pre-Amplifier Mute", "Switch", "Pre-Amplifier" }, - { "HP Right", NULL, "Pre-Amplifier Mute" }, - { "HP Left", NULL, "Pre-Amplifier Mute" }, + /* Headphone Output Routes */ + { "Power Amplifier Mute", "Switch", "Power Amplifier" }, + { "HP Right", NULL, "Power Amplifier Mute" }, + { "HP Left", NULL, "Power Amplifier Mute" }, };
static struct snd_soc_codec_driver sun4i_codec_codec = {
Hi!
On Tue, Oct 27, 2015 at 09:00:45PM +0000, Adam Sampson wrote:
The power amplifier for the headphone output is called "the PA" and "the headphone amplifier" in Allwinner's documentation for the A10 and A20. sun4i-codec calls it "PA" in some places and "Pre-Amplifier" (which isn't really accurate) in others, leading to user-visible controls with different names referring to the same device.
When this driver implements audio input, it'll also need to expose controls for the line and mic input preamps, so just referring to "the Pre-Amplifier" will be ambiguous.
Change it to use "Power Amplifier" consistently for the power amplifier's controls.
Signed-off-by: Adam Sampson ats@offog.org
Acked-by: Maxime Ripard maxime.ripard@free-electrons.com
Thanks! Maxime
The patch
ASoC: sun4i-codec: use consistent names for PA controls
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 474d147ad1ecc98e50a65c9f350fadfcc37a8bb4 Mon Sep 17 00:00:00 2001
From: Adam Sampson ats@offog.org Date: Tue, 27 Oct 2015 21:00:45 +0000 Subject: [PATCH] ASoC: sun4i-codec: use consistent names for PA controls
The power amplifier for the headphone output is called "the PA" and "the headphone amplifier" in Allwinner's documentation for the A10 and A20. sun4i-codec calls it "PA" in some places and "Pre-Amplifier" (which isn't really accurate) in others, leading to user-visible controls with different names referring to the same device.
When this driver implements audio input, it'll also need to expose controls for the line and mic input preamps, so just referring to "the Pre-Amplifier" will be ambiguous.
Change it to use "Power Amplifier" consistently for the power amplifier's controls.
Signed-off-by: Adam Sampson ats@offog.org Acked-by: Maxime Ripard maxime.ripard@free-electrons.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/sunxi/sun4i-codec.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c index bcbf4da..1bb896d 100644 --- a/sound/soc/sunxi/sun4i-codec.c +++ b/sound/soc/sunxi/sun4i-codec.c @@ -2,6 +2,7 @@ * Copyright 2014 Emilio López emilio@elopez.com.ar * Copyright 2014 Jon Smirl jonsmirl@gmail.com * Copyright 2015 Maxime Ripard maxime.ripard@free-electrons.com + * Copyright 2015 Adam Sampson ats@offog.org * * Based on the Allwinner SDK driver, released under the GPL. * @@ -404,7 +405,7 @@ static const struct snd_kcontrol_new sun4i_codec_pa_mute = static DECLARE_TLV_DB_SCALE(sun4i_codec_pa_volume_scale, -6300, 100, 1);
static const struct snd_kcontrol_new sun4i_codec_widgets[] = { - SOC_SINGLE_TLV("PA Volume", SUN4I_CODEC_DAC_ACTL, + SOC_SINGLE_TLV("Power Amplifier Volume", SUN4I_CODEC_DAC_ACTL, SUN4I_CODEC_DAC_ACTL_PA_VOL, 0x3F, 0, sun4i_codec_pa_volume_scale), }; @@ -452,12 +453,12 @@ static const struct snd_soc_dapm_widget sun4i_codec_dapm_widgets[] = { SND_SOC_DAPM_SUPPLY("Mixer Enable", SUN4I_CODEC_DAC_ACTL, SUN4I_CODEC_DAC_ACTL_MIXEN, 0, NULL, 0),
- /* Pre-Amplifier */ - SND_SOC_DAPM_MIXER("Pre-Amplifier", SUN4I_CODEC_ADC_ACTL, + /* Power Amplifier */ + SND_SOC_DAPM_MIXER("Power Amplifier", SUN4I_CODEC_ADC_ACTL, SUN4I_CODEC_ADC_ACTL_PA_EN, 0, sun4i_codec_pa_mixer_controls, ARRAY_SIZE(sun4i_codec_pa_mixer_controls)), - SND_SOC_DAPM_SWITCH("Pre-Amplifier Mute", SND_SOC_NOPM, 0, 0, + SND_SOC_DAPM_SWITCH("Power Amplifier Mute", SND_SOC_NOPM, 0, 0, &sun4i_codec_pa_mute),
SND_SOC_DAPM_OUTPUT("HP Right"), @@ -480,16 +481,16 @@ static const struct snd_soc_dapm_route sun4i_codec_dapm_routes[] = { { "Left Mixer", NULL, "Mixer Enable" }, { "Left Mixer", "Left DAC Playback Switch", "Left DAC" },
- /* Pre-Amplifier Mixer Routes */ - { "Pre-Amplifier", "Mixer Playback Switch", "Left Mixer" }, - { "Pre-Amplifier", "Mixer Playback Switch", "Right Mixer" }, - { "Pre-Amplifier", "DAC Playback Switch", "Left DAC" }, - { "Pre-Amplifier", "DAC Playback Switch", "Right DAC" }, + /* Power Amplifier Routes */ + { "Power Amplifier", "Mixer Playback Switch", "Left Mixer" }, + { "Power Amplifier", "Mixer Playback Switch", "Right Mixer" }, + { "Power Amplifier", "DAC Playback Switch", "Left DAC" }, + { "Power Amplifier", "DAC Playback Switch", "Right DAC" },
- /* PA -> HP path */ - { "Pre-Amplifier Mute", "Switch", "Pre-Amplifier" }, - { "HP Right", NULL, "Pre-Amplifier Mute" }, - { "HP Left", NULL, "Pre-Amplifier Mute" }, + /* Headphone Output Routes */ + { "Power Amplifier Mute", "Switch", "Power Amplifier" }, + { "HP Right", NULL, "Power Amplifier Mute" }, + { "HP Left", NULL, "Power Amplifier Mute" }, };
static struct snd_soc_codec_driver sun4i_codec_codec = {
participants (3)
-
Adam Sampson -
Mark Brown -
Maxime Ripard