On Thu, Jun 14, 2018 at 01:09:01PM -0300, Mauro Carvalho Chehab wrote:

As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix

Manually checked that produced results are valid.

Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org

For hwmon:

Acked-by: Guenter Roeck linux@roeck-us.net

---

.../devicetree/bindings/clock/st/st,clkgen.txt | 8 ++++---- .../devicetree/bindings/clock/ti/gate.txt | 2 +- .../devicetree/bindings/clock/ti/interface.txt | 2 +- .../bindings/cpufreq/cpufreq-mediatek.txt | 2 +- .../devicetree/bindings/devfreq/rk3399_dmc.txt | 2 +- .../bindings/gpu/arm,mali-midgard.txt | 2 +- .../bindings/gpu/arm,mali-utgard.txt | 2 +- .../devicetree/bindings/mfd/mt6397.txt | 2 +- .../devicetree/bindings/mfd/sun6i-prcm.txt | 2 +- .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 +- .../devicetree/bindings/net/dsa/ksz.txt | 2 +- .../devicetree/bindings/net/dsa/mt7530.txt | 2 +- .../devicetree/bindings/power/fsl,imx-gpc.txt | 2 +- .../bindings/power/wakeup-source.txt | 2 +- .../devicetree/bindings/usb/rockchip,dwc3.txt | 2 +- Documentation/hwmon/ina2xx | 2 +- Documentation/maintainer/pull-requests.rst | 2 +- Documentation/translations/ko_KR/howto.rst | 2 +- MAINTAINERS | 18 +++++++++--------- drivers/net/ethernet/intel/Kconfig | 8 ++++---- drivers/soundwire/stream.c | 8 ++++---- fs/Kconfig.binfmt | 2 +- fs/binfmt_misc.c | 2 +- 23 files changed, 40 insertions(+), 40 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt index 7364953d0d0b..45ac19bfa0a9 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt @@ -31,10 +31,10 @@ This binding uses the common clock binding[1]. Each subnode should use the binding described in [2]..[7]

[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt -[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt -[7] Documentation/devicetree/bindings/clock/st,quadfs.txt -[8] Documentation/devicetree/bindings/clock/st,flexgen.txt +[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt +[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt +[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt +[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt

Required properties: diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt index 03f8fdee62a7..56d603c1f716 100644 --- a/Documentation/devicetree/bindings/clock/ti/gate.txt +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt @@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for that is used.

[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/gate-clock.txt +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt [3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt

Required properties: diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt index 3111a409fea6..3f4704040140 100644 --- a/Documentation/devicetree/bindings/clock/ti/interface.txt +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt @@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate clock) and hardware autoidle enable / disable.

[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/gate-clock.txt +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt

Required properties:

• compatible : shall be one of:

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt index d36f07e0a2bb..0551c78619de 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt @@ -8,7 +8,7 @@ Required properties: "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock source (usually MAINPLL) when the original CPU PLL is under transition and not stable yet.

• Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for

• Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for generic clock consumer properties.

• operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt for detail.

diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt index d6d2833482c9..fc2bcbe26b1e 100644 --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt @@ -12,7 +12,7 @@ Required properties:

• clocks: Phandles for clock specified in "clock-names" property
• clock-names : The name of clock used by the DFI, must be "pclk_ddr_mon";

-- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt +- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp.txt for details.

• center-supply: DMC supply node.
• status: Marks the node enabled/disabled.

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt index 039219df05c5..18a2cde2e5f3 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt @@ -34,7 +34,7 @@ Optional properties:

• mali-supply : Phandle to regulator for the Mali device. Refer to Documentation/devicetree/bindings/regulator/regulator.txt for details.

-- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt +- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt for details.

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index c1f65d1dac1d..63cd91176a68 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -44,7 +44,7 @@ Optional properties:

• memory-region: Memory region to allocate from, as defined in
• Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt

• Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt

  • mali-supply:

  Phandle to regulator for the Mali device, as defined in

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt index d1df77f4d655..0ebd08af777d 100644 --- a/Documentation/devicetree/bindings/mfd/mt6397.txt +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules: It is interfaced to host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap. See the following for pwarp node definitions: -Documentation/devicetree/bindings/soc/pwrap.txt +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt

This document describes the binding for MFD device and its sub module.

diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt index dd2c06540485..4d21ffdb0fc1 100644 --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt @@ -9,7 +9,7 @@ Required properties:

The prcm node may contain several subdevices definitions:

• see Documentation/devicetree/clk/sunxi.txt for clock devices
• • see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset

• • see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset controller devices

diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index a58c173b7ab9..0419a63f73a0 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host) rest of the gpios (depending on the bus-width property) are the data lines in no particular order. The format of the gpio specifier depends on the gpio controller. -(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt) +(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)

Example:

diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index fd23904ac68e..a700943218ca 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -6,7 +6,7 @@ Required properties:

• compatible: For external switch chips, compatible string must be exactly one of: "microchip,ksz9477"

-See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required and optional properties.

Examples: diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt index a9bc27b93ee3..aa3527f71fdc 100644 --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt @@ -31,7 +31,7 @@ Required properties for the child nodes within ports container:

• phy-mode: String, must be either "trgmii" or "rgmii" for port labeled "cpu".

-See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required, optional properties and how the integrated switch subnodes must be specified.

diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt index b31d6bbeee16..726ec2875223 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt @@ -14,7 +14,7 @@ Required properties: datasheet

• interrupts: Should contain one interrupt specifier for the GPC interrupt
• clocks: Must contain an entry for each entry in clock-names.
• See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.

• See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.

• clock-names: Must include the following entries:
  • ipg

diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt index 5d254ab13ebf..cfd74659fbed 100644 --- a/Documentation/devicetree/bindings/power/wakeup-source.txt +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt @@ -22,7 +22,7 @@ List of legacy properties and respective binding document 3. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt 4. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt Documentation/devicetree/bindings/mfd/tc3589x.txt

• 		Documentation/devicetree/bindings/input/ads7846.txt
  

• 		Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
  

5. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
6. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt
7. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt

diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt index 50a31536e975..252a05c5d976 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt @@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of the node is not important. The content of the node is defined in dwc3.txt.

Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt +Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt

Example device nodes:

diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index cfd31d94c872..72d16f08e431 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -53,7 +53,7 @@ bus supply voltage.

The shunt value in micro-ohms can be set via platform data or device tree at compile-time or via the shunt_resistor attribute in sysfs at run-time. Please -refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings +refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings if the device tree is used.

Additionally ina226 supports update_interval attribute as described in diff --git a/Documentation/maintainer/pull-requests.rst b/Documentation/maintainer/pull-requests.rst index a19db3458b56..22b271de0304 100644 --- a/Documentation/maintainer/pull-requests.rst +++ b/Documentation/maintainer/pull-requests.rst @@ -41,7 +41,7 @@ named ``char-misc-next``, you would be using the following command::

that will create a signed tag called ``char-misc-4.15-rc1`` based on the last commit in the ``char-misc-next`` branch, and sign it with your gpg key -(see :ref:`Documentation/maintainer/configure_git.rst <configuregit>`). +(see :ref:`Documentation/maintainer/configure-git.rst <configuregit>`).

Linus will only accept pull requests based on a signed tag. Other maintainers may differ. diff --git a/Documentation/translations/ko_KR/howto.rst b/Documentation/translations/ko_KR/howto.rst index 624654bdcd8a..a8197e072599 100644 --- a/Documentation/translations/ko_KR/howto.rst +++ b/Documentation/translations/ko_KR/howto.rst @@ -160,7 +160,7 @@ mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다. 독특한 행동에 관하여 흔히 있는 오해들과 혼란들을 해소하고 있기 때문이다.

• :ref:`Documentation/process/stable_kernel_rules.rst <stable_kernel_rules>`

• :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>` 이 문서는 안정적인 커널 배포가 이루어지는 규칙을 설명하고 있으며 여러분들이 이러한 배포들 중 하나에 변경을 하길 원한다면 무엇을 해야 하는지를 설명한다.

diff --git a/MAINTAINERS b/MAINTAINERS index ec65e33e2cf1..5871dd5060f6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4513,7 +4513,7 @@ DRM DRIVER FOR ILITEK ILI9225 PANELS M: David Lechner david@lechnology.com S: Maintained F: drivers/gpu/drm/tinydrm/ili9225.c -F: Documentation/devicetree/bindings/display/ili9225.txt +F: Documentation/devicetree/bindings/display/ilitek,ili9225.txt

DRM DRIVER FOR INTEL I810 VIDEO CARDS S: Orphan / Obsolete @@ -4599,13 +4599,13 @@ DRM DRIVER FOR SITRONIX ST7586 PANELS M: David Lechner david@lechnology.com S: Maintained F: drivers/gpu/drm/tinydrm/st7586.c -F: Documentation/devicetree/bindings/display/st7586.txt +F: Documentation/devicetree/bindings/display/sitronix,st7586.txt

DRM DRIVER FOR SITRONIX ST7735R PANELS M: David Lechner david@lechnology.com S: Maintained F: drivers/gpu/drm/tinydrm/st7735r.c -F: Documentation/devicetree/bindings/display/st7735r.txt +F: Documentation/devicetree/bindings/display/sitronix,st7735r.txt

DRM DRIVER FOR TDFX VIDEO CARDS S: Orphan / Obsolete @@ -4824,7 +4824,7 @@ M: Eric Anholt eric@anholt.net S: Supported F: drivers/gpu/drm/v3d/ F: include/uapi/drm/v3d_drm.h -F: Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt +F: Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt T: git git://anongit.freedesktop.org/drm/drm-misc

DRM DRIVERS FOR VC4 @@ -5735,7 +5735,7 @@ M: Madalin Bucur madalin.bucur@nxp.com L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/freescale/fman -F: Documentation/devicetree/bindings/powerpc/fsl/fman.txt +F: Documentation/devicetree/bindings/net/fsl-fman.txt

FREESCALE QORIQ PTP CLOCK DRIVER M: Yangbo Lu yangbo.lu@nxp.com @@ -8700,7 +8700,7 @@ M: Guenter Roeck linux@roeck-us.net L: linux-hwmon@vger.kernel.org S: Maintained F: Documentation/hwmon/max6697 -F: Documentation/devicetree/bindings/i2c/max6697.txt +F: Documentation/devicetree/bindings/hwmon/max6697.txt F: drivers/hwmon/max6697.c F: include/linux/platform_data/max6697.h

@@ -9080,7 +9080,7 @@ M: Martin Donnelly martin.donnelly@ge.com M: Martyn Welch martyn.welch@collabora.co.uk S: Maintained F: drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c -F: Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt +F: Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt

MEGARAID SCSI/SAS DRIVERS M: Kashyap Desai kashyap.desai@broadcom.com @@ -10728,7 +10728,7 @@ PARALLEL LCD/KEYPAD PANEL DRIVER M: Willy Tarreau willy@haproxy.com M: Ksenija Stanojevic ksenija.stanojevic@gmail.com S: Odd Fixes -F: Documentation/misc-devices/lcd-panel-cgram.txt +F: Documentation/auxdisplay/lcd-panel-cgram.txt F: drivers/misc/panel.c

PARALLEL PORT SUBSYSTEM @@ -13291,7 +13291,7 @@ M: Vinod Koul vkoul@kernel.org L: alsa-devel@alsa-project.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git S: Supported -F: Documentation/sound/alsa/compress_offload.txt +F: Documentation/sound/designs/compress-offload.rst F: include/sound/compress_driver.h F: include/uapi/sound/compress_* F: sound/core/compress_offload.c diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index 14d287bed33c..1ab613eb5796 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -33,7 +33,7 @@ config E100 to identify the adapter.

 More specific information on configuring the driver is in

•  <file:Documentation/networking/e100.txt>.
  

•  <file:Documentation/networking/e100.rst>.
  
  

  To compile this driver as a module, choose M here. The module will be called e100.

@@ -49,7 +49,7 @@ config E1000 http://support.intel.com

 More specific information on configuring the driver is in

•  <file:Documentation/networking/e1000.txt>.
  

•  <file:Documentation/networking/e1000.rst>.
  
  

  To compile this driver as a module, choose M here. The module will be called e1000.

@@ -94,7 +94,7 @@ config IGB http://support.intel.com

 More specific information on configuring the driver is in

•  <file:Documentation/networking/e1000.txt>.
  

•  <file:Documentation/networking/e1000.rst>.
  
  

  To compile this driver as a module, choose M here. The module will be called igb.

@@ -130,7 +130,7 @@ config IGBVF http://support.intel.com

 More specific information on configuring the driver is in

•  <file:Documentation/networking/e1000.txt>.
  

•  <file:Documentation/networking/e1000.rst>.
  
  

  To compile this driver as a module, choose M here. The module will be called igbvf.

diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 8974a0fcda1b..4b5e250e8615 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1291,7 +1291,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)

• @stream: Soundwire stream

• • Documentation/soundwire/stream.txt explains this API in detail

• • Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */

int sdw_prepare_stream(struct sdw_stream_runtime *stream) { @@ -1348,7 +1348,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream)

• @stream: Soundwire stream

• • Documentation/soundwire/stream.txt explains this API in detail

• • Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */

int sdw_enable_stream(struct sdw_stream_runtime *stream) { @@ -1400,7 +1400,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream)

• @stream: Soundwire stream

• • Documentation/soundwire/stream.txt explains this API in detail

• • Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */

int sdw_disable_stream(struct sdw_stream_runtime *stream) { @@ -1456,7 +1456,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)

• @stream: Soundwire stream

• • Documentation/soundwire/stream.txt explains this API in detail

• • Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */

int sdw_deprepare_stream(struct sdw_stream_runtime *stream) { diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index 57a27c42b5ac..56df483de619 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -168,7 +168,7 @@ config BINFMT_MISC will automatically feed it to the correct interpreter.

 You can do other nice things, too. Read the file

•  <file:Documentation/binfmt_misc.txt> to learn how to use this
  

•  <file:Documentation/admin-guide/binfmt-misc.rst> to learn how to use this
  

  feature, file:Documentation/admin-guide/java.rst for information about how to include Java support. and file:Documentation/admin-guide/mono.rst for information about how to include Mono-based .NET support.

diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c index 4de191563261..4b5fff31ef27 100644 --- a/fs/binfmt_misc.c +++ b/fs/binfmt_misc.c @@ -4,7 +4,7 @@

• Copyright (C) 1997 Richard Günther
• binfmt_misc detects binaries via a magic or filename extension and invokes

• • a specified wrapper. See Documentation/binfmt_misc.txt for more details.

• • a specified wrapper. See Documentation/admin-guide/binfmt-misc.rst for more details.
  */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

2.17.1

-- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html