From: Jarkko Nikula jarkko.nikula@nokia.com

Originally it was put too tight limits to support only 44.1 kHz and 48 kHz sample rates in McBSP DAI driver. Extend it now to 8 kHz - 96 kHz. With 96 kHz and 2*16 bits, bit clock is 3.072 MHz < 3.125 MHz (I2S max?).

Tested on Nokia N810 with TVL320AIC33 from rates 8 - 96 kHz and on Texas Instruments Beagle with TWL4030 from rates 8 - 48 kHz.

Signed-off-by: Jarkko Nikula jarkko.nikula@nokia.com Acked-by: Steve Sakoman steve@sakoman.com Acked-by: Arun KS arunks@mistralsolutions.com Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/omap/omap-mcbsp.c | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 8485a8a..3d4060b 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -36,9 +36,7 @@ #include "omap-mcbsp.h" #include "omap-pcm.h"

-#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_44100 | \ - SNDRV_PCM_RATE_48000 | \ - SNDRV_PCM_RATE_KNOT) +#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000)

struct omap_mcbsp_data { unsigned int bus_id;

The WM8728 is a high performance stereo DAC designed for applications such as DVD, home theatre and digital TV.

Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wm8728.c | 574 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm8728.h | 30 +++ 4 files changed, 610 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/wm8728.c create mode 100644 sound/soc/codecs/wm8728.h

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index b73c36a..8a84460 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -13,6 +13,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_UDA1380 if I2C select SND_SOC_WM8510 if (I2C || SPI_MASTER) select SND_SOC_WM8580 if I2C + select SND_SOC_WM8728 if (I2C || SPI_MASTER) select SND_SOC_WM8731 if (I2C || SPI_MASTER) select SND_SOC_WM8750 if (I2C || SPI_MASTER) select SND_SOC_WM8753 if (I2C || SPI_MASTER) @@ -93,6 +94,9 @@ config SND_SOC_WM8510 config SND_SOC_WM8580 tristate

+config SND_SOC_WM8728 + tristate + config SND_SOC_WM8731 tristate

diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 3b9b58a..7ae17a6 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -11,6 +11,7 @@ snd-soc-twl4030-objs := twl4030.o snd-soc-uda1380-objs := uda1380.o snd-soc-wm8510-objs := wm8510.o snd-soc-wm8580-objs := wm8580.o +snd-soc-wm8728-objs := wm8728.o snd-soc-wm8731-objs := wm8731.o snd-soc-wm8750-objs := wm8750.o snd-soc-wm8753-objs := wm8753.o @@ -34,6 +35,7 @@ obj-$(CONFIG_SND_SOC_TWL4030) += snd-soc-twl4030.o obj-$(CONFIG_SND_SOC_UDA1380) += snd-soc-uda1380.o obj-$(CONFIG_SND_SOC_WM8510) += snd-soc-wm8510.o obj-$(CONFIG_SND_SOC_WM8580) += snd-soc-wm8580.o +obj-$(CONFIG_SND_SOC_WM8728) += snd-soc-wm8728.o obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o diff --git a/sound/soc/codecs/wm8728.c b/sound/soc/codecs/wm8728.c new file mode 100644 index 0000000..3e39dea --- /dev/null +++ b/sound/soc/codecs/wm8728.c @@ -0,0 +1,574 @@ +/* + * wm8728.c -- WM8728 ALSA SoC Audio driver + * + * Copyright 2008 Wolfson Microelectronics plc + * + * Author: Mark Brown broonie@opensource.wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "wm8728.h" + +struct snd_soc_codec_device soc_codec_dev_wm8728; + +/* + * We can't read the WM8728 register space so we cache them instead. + * Note that the defaults here aren't the physical defaults, we latch + * the volume update bits, mute the output and enable infinite zero + * detect. + */ +static const u16 wm8728_reg_defaults[] = { + 0x1ff, + 0x1ff, + 0x001, + 0x100, +}; + +static inline unsigned int wm8728_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + BUG_ON(reg > ARRAY_SIZE(wm8728_reg_defaults)); + return cache[reg]; +} + +static inline void wm8728_write_reg_cache(struct snd_soc_codec *codec, + u16 reg, unsigned int value) +{ + u16 *cache = codec->reg_cache; + BUG_ON(reg > ARRAY_SIZE(wm8728_reg_defaults)); + cache[reg] = value; +} + +/* + * write to the WM8728 register space + */ +static int wm8728_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 data[2]; + + /* data is + * D15..D9 WM8728 register offset + * D8...D0 register data + */ + data[0] = (reg << 1) | ((value >> 8) & 0x0001); + data[1] = value & 0x00ff; + + wm8728_write_reg_cache(codec, reg, value); + + if (codec->hw_write(codec->control_data, data, 2) == 2) + return 0; + else + return -EIO; +} + +static const DECLARE_TLV_DB_SCALE(wm8728_tlv, -12750, 50, 1); + +static const struct snd_kcontrol_new wm8728_snd_controls[] = { + +SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8728_DACLVOL, WM8728_DACRVOL, + 0, 255, 0, wm8728_tlv), + +SOC_SINGLE("Deemphasis", WM8728_DACCTL, 1, 1, 0), +}; + +static int wm8728_add_controls(struct snd_soc_codec *codec) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(wm8728_snd_controls); i++) { + err = snd_ctl_add(codec->card, + snd_soc_cnew(&wm8728_snd_controls[i], + codec, NULL)); + if (err < 0) + return err; + } + + return 0; +} + +/* + * DAPM controls. + */ +static const struct snd_soc_dapm_widget wm8728_dapm_widgets[] = { +SND_SOC_DAPM_DAC("DAC", "HiFi Playback", SND_SOC_NOPM, 0, 0), +SND_SOC_DAPM_OUTPUT("VOUTL"), +SND_SOC_DAPM_OUTPUT("VOUTR"), +}; + +static const struct snd_soc_dapm_route intercon[] = { + {"VOUTL", NULL, "DAC"}, + {"VOUTR", NULL, "DAC"}, +}; + +static int wm8728_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, wm8728_dapm_widgets, + ARRAY_SIZE(wm8728_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); + + snd_soc_dapm_new_widgets(codec); + + return 0; +} + +static int wm8728_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + u16 mute_reg = wm8728_read_reg_cache(codec, WM8728_DACCTL); + + if (mute) + wm8728_write(codec, WM8728_DACCTL, mute_reg | 1); + else + wm8728_write(codec, WM8728_DACCTL, mute_reg & ~1); + + return 0; +} + +static int wm8728_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + u16 dac = wm8728_read_reg_cache(codec, WM8728_DACCTL); + + dac &= ~0x18; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + dac |= 0x10; + break; + case SNDRV_PCM_FORMAT_S24_LE: + dac |= 0x08; + break; + default: + return -EINVAL; + } + + wm8728_write(codec, WM8728_DACCTL, dac); + + return 0; +} + +static int wm8728_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 iface = wm8728_read_reg_cache(codec, WM8728_IFCTL); + + /* Currently only I2S is supported by the driver, though the + * hardware is more flexible. + */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= 1; + break; + default: + return -EINVAL; + } + + /* The hardware only support full slave mode */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + iface &= ~0x22; + break; + case SND_SOC_DAIFMT_IB_NF: + iface |= 0x20; + iface &= ~0x02; + break; + case SND_SOC_DAIFMT_NB_IF: + iface |= 0x02; + iface &= ~0x20; + break; + case SND_SOC_DAIFMT_IB_IF: + iface |= 0x22; + break; + default: + return -EINVAL; + } + + wm8728_write(codec, WM8728_IFCTL, iface); + return 0; +} + +static int wm8728_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + u16 reg; + int i; + + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + /* Power everything up... */ + reg = wm8728_read_reg_cache(codec, WM8728_DACCTL); + wm8728_write(codec, WM8728_DACCTL, reg & ~0x4); + + /* ..then sync in the register cache. */ + for (i = 0; i < ARRAY_SIZE(wm8728_reg_defaults); i++) + wm8728_write(codec, i, + wm8728_read_reg_cache(codec, i)); + } + break; + + case SND_SOC_BIAS_OFF: + reg = wm8728_read_reg_cache(codec, WM8728_DACCTL); + wm8728_write(codec, WM8728_DACCTL, reg | 0x4); + break; + } + codec->bias_level = level; + return 0; +} + +#define WM8728_RATES (SNDRV_PCM_RATE_8000_192000) + +#define WM8728_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE) + +struct snd_soc_dai wm8728_dai = { + .name = "WM8728", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = WM8728_RATES, + .formats = WM8728_FORMATS, + }, + .ops = { + .hw_params = wm8728_hw_params, + }, + .dai_ops = { + .digital_mute = wm8728_mute, + .set_fmt = wm8728_set_dai_fmt, + } +}; +EXPORT_SYMBOL_GPL(wm8728_dai); + +static int wm8728_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + wm8728_set_bias_level(codec, SND_SOC_BIAS_OFF); + + return 0; +} + +static int wm8728_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + wm8728_set_bias_level(codec, codec->suspend_bias_level); + + return 0; +} + +/* + * initialise the WM8728 driver + * register the mixer and dsp interfaces with the kernel + */ +static int wm8728_init(struct snd_soc_device *socdev) +{ + struct snd_soc_codec *codec = socdev->codec; + int ret = 0; + + codec->name = "WM8728"; + codec->owner = THIS_MODULE; + codec->read = wm8728_read_reg_cache; + codec->write = wm8728_write; + codec->set_bias_level = wm8728_set_bias_level; + codec->dai = &wm8728_dai; + codec->num_dai = 1; + codec->bias_level = SND_SOC_BIAS_OFF; + codec->reg_cache_size = ARRAY_SIZE(wm8728_reg_defaults); + codec->reg_cache = kmemdup(wm8728_reg_defaults, + sizeof(wm8728_reg_defaults), + GFP_KERNEL); + if (codec->reg_cache == NULL) + return -ENOMEM; + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + printk(KERN_ERR "wm8728: failed to create pcms\n"); + goto pcm_err; + } + + /* power on device */ + wm8728_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + wm8728_add_controls(codec); + wm8728_add_widgets(codec); + ret = snd_soc_register_card(socdev); + if (ret < 0) { + printk(KERN_ERR "wm8728: failed to register card\n"); + goto card_err; + } + + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + kfree(codec->reg_cache); + return ret; +} + +static struct snd_soc_device *wm8728_socdev; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + +/* + * WM8728 2 wire address is determined by GPIO5 + * state during powerup. + * low = 0x1a + * high = 0x1b + */ + +static int wm8728_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct snd_soc_device *socdev = wm8728_socdev; + struct snd_soc_codec *codec = socdev->codec; + int ret; + + i2c_set_clientdata(i2c, codec); + codec->control_data = i2c; + + ret = wm8728_init(socdev); + if (ret < 0) + pr_err("failed to initialise WM8728\n"); + + return ret; +} + +static int wm8728_i2c_remove(struct i2c_client *client) +{ + struct snd_soc_codec *codec = i2c_get_clientdata(client); + kfree(codec->reg_cache); + return 0; +} + +static const struct i2c_device_id wm8728_i2c_id[] = { + { "wm8728", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8728_i2c_id); + +static struct i2c_driver wm8728_i2c_driver = { + .driver = { + .name = "WM8728 I2C Codec", + .owner = THIS_MODULE, + }, + .probe = wm8728_i2c_probe, + .remove = wm8728_i2c_remove, + .id_table = wm8728_i2c_id, +}; + +static int wm8728_add_i2c_device(struct platform_device *pdev, + const struct wm8728_setup_data *setup) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + int ret; + + ret = i2c_add_driver(&wm8728_i2c_driver); + if (ret != 0) { + dev_err(&pdev->dev, "can't add i2c driver\n"); + return ret; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = setup->i2c_address; + strlcpy(info.type, "wm8728", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(setup->i2c_bus); + if (!adapter) { + dev_err(&pdev->dev, "can't get i2c adapter %d\n", + setup->i2c_bus); + goto err_driver; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + goto err_driver; + } + + return 0; + +err_driver: + i2c_del_driver(&wm8728_i2c_driver); + return -ENODEV; +} +#endif + +#if defined(CONFIG_SPI_MASTER) +static int __devinit wm8728_spi_probe(struct spi_device *spi) +{ + struct snd_soc_device *socdev = wm8728_socdev; + struct snd_soc_codec *codec = socdev->codec; + int ret; + + codec->control_data = spi; + + ret = wm8728_init(socdev); + if (ret < 0) + dev_err(&spi->dev, "failed to initialise WM8728\n"); + + return ret; +} + +static int __devexit wm8728_spi_remove(struct spi_device *spi) +{ + return 0; +} + +static struct spi_driver wm8728_spi_driver = { + .driver = { + .name = "wm8728", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = wm8728_spi_probe, + .remove = __devexit_p(wm8728_spi_remove), +}; + +static int wm8728_spi_write(struct spi_device *spi, const char *data, int len) +{ + struct spi_transfer t; + struct spi_message m; + u8 msg[2]; + + if (len <= 0) + return 0; + + msg[0] = data[0]; + msg[1] = data[1]; + + spi_message_init(&m); + memset(&t, 0, (sizeof t)); + + t.tx_buf = &msg[0]; + t.len = len; + + spi_message_add_tail(&t, &m); + spi_sync(spi, &m); + + return len; +} +#endif /* CONFIG_SPI_MASTER */ + +static int wm8728_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct wm8728_setup_data *setup; + struct snd_soc_codec *codec; + int ret = 0; + + setup = socdev->codec_data; + codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (codec == NULL) + return -ENOMEM; + + socdev->codec = codec; + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + wm8728_socdev = socdev; + ret = -ENODEV; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + if (setup->i2c_address) { + codec->hw_write = (hw_write_t)i2c_master_send; + ret = wm8728_add_i2c_device(pdev, setup); + } +#endif +#if defined(CONFIG_SPI_MASTER) + if (setup->spi) { + codec->hw_write = (hw_write_t)wm8728_spi_write; + ret = spi_register_driver(&wm8728_spi_driver); + if (ret != 0) + printk(KERN_ERR "can't add spi driver"); + } +#endif + + if (ret != 0) + kfree(codec); + + return ret; +} + +/* power down chip */ +static int wm8728_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + if (codec->control_data) + wm8728_set_bias_level(codec, SND_SOC_BIAS_OFF); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_unregister_device(codec->control_data); + i2c_del_driver(&wm8728_i2c_driver); +#endif +#if defined(CONFIG_SPI_MASTER) + spi_unregister_driver(&wm8728_spi_driver); +#endif + kfree(codec); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm8728 = { + .probe = wm8728_probe, + .remove = wm8728_remove, + .suspend = wm8728_suspend, + .resume = wm8728_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm8728); + +MODULE_DESCRIPTION("ASoC WM8728 driver"); +MODULE_AUTHOR("Mark Brown broonie@opensource.wolfsonmicro.com"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8728.h b/sound/soc/codecs/wm8728.h new file mode 100644 index 0000000..d269c13 --- /dev/null +++ b/sound/soc/codecs/wm8728.h @@ -0,0 +1,30 @@ +/* + * wm8728.h -- WM8728 ASoC codec driver + * + * Copyright 2008 Wolfson Microelectronics plc + * + * Author: Mark Brown broonie@opensource.wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _WM8728_H +#define _WM8728_H + +#define WM8728_DACLVOL 0x00 +#define WM8728_DACRVOL 0x01 +#define WM8728_DACCTL 0x02 +#define WM8728_IFCTL 0x03 + +struct wm8728_setup_data { + int spi; + int i2c_bus; + unsigned short i2c_address; +}; + +extern struct snd_soc_dai wm8728_dai; +extern struct snd_soc_codec_device soc_codec_dev_wm8728; + +#endif