[PATCH 0/2] Add reset-gpios handling for max98927
The max98927 codec on some devices (i.e. Xiaomi Mi A2 Lite phone) require hardware-resetting the codec by driving a reset-gpio. This series add support for it through an optional reset-gpios property.
Alejandro Tafalla (2): ASoC: max98927: Handle reset gpio when probing i2c dt-bindings: sound: max98927: Add reset-gpios optional property
.../devicetree/bindings/sound/max9892x.txt | 3 +++ sound/soc/codecs/max98927.c | 16 ++++++++++++++++ sound/soc/codecs/max98927.h | 1 + 3 files changed, 20 insertions(+)
Drive the reset gpio if defined in the DTS node.
Signed-off-by: Alejandro Tafalla atafalla@dnyon.com --- sound/soc/codecs/max98927.c | 16 ++++++++++++++++ sound/soc/codecs/max98927.h | 1 + 2 files changed, 17 insertions(+)
diff --git a/sound/soc/codecs/max98927.c b/sound/soc/codecs/max98927.c index 8b206ee77709..dacf64c4cdf7 100644 --- a/sound/soc/codecs/max98927.c +++ b/sound/soc/codecs/max98927.c @@ -898,6 +898,22 @@ static int max98927_i2c_probe(struct i2c_client *i2c, return ret; }
+ max98927->reset_gpio + = devm_gpiod_get_optional(&i2c->dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(max98927->reset_gpio)) { + ret = PTR_ERR(max98927->reset_gpio); + dev_err(&i2c->dev, + "Failed to request GPIO reset pin, error %d\n", ret); + return ret; + } + + if (max98927->reset_gpio) { + gpiod_set_value_cansleep(max98927->reset_gpio, 0); + usleep_range(5, 10) + gpiod_set_value_cansleep(max98927->reset_gpio, 1); + usleep_range(1, 5) + } + /* Check Revision ID */ ret = regmap_read(max98927->regmap, MAX98927_R01FF_REV_ID, ®); diff --git a/sound/soc/codecs/max98927.h b/sound/soc/codecs/max98927.h index 05f495db914d..5c04bf38e24a 100644 --- a/sound/soc/codecs/max98927.h +++ b/sound/soc/codecs/max98927.h @@ -255,6 +255,7 @@ struct max98927_priv { struct regmap *regmap; struct snd_soc_component *component; struct max98927_pdata *pdata; + struct gpio_desc *reset_gpio; unsigned int spk_gain; unsigned int sysclk; unsigned int v_l_slot;
Add the reset-gpios as an optional property because some devices might not need it to work properly.
Signed-off-by: Alejandro Tafalla atafalla@dnyon.com --- Documentation/devicetree/bindings/sound/max9892x.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/max9892x.txt b/Documentation/devicetree/bindings/sound/max9892x.txt index f6171591ddc6..73733fb60136 100644 --- a/Documentation/devicetree/bindings/sound/max9892x.txt +++ b/Documentation/devicetree/bindings/sound/max9892x.txt @@ -30,6 +30,9 @@ Required properties:
- reg : the I2C address of the device for I2C
+Optional Properties: + - reset-gpios : reference to the GPIO connected to the reset pin, if any. + Example:
codec: max98927@3a {
participants (1)
-
Alejandro Tafalla