[alsa-devel] [PATCH] ASoC: wm8904: fix runtime warning
As the commit 5fe5b76 (ASoC: dapm: Do not pretend to support controls for non mixer/mux widgets) remove the fake control.
Then, the wm8904 throw out the following warning at runtime. --->8--- wm8904 1-001a: Control not supported for path ADCL -> [Left] -> AIFOUTL wm8904 1-001a: ASoC: no dapm match for ADCL --> Left --> AIFOUTL wm8904 1-001a: ASoC: Failed to add route ADCL -> Left -> AIFOUTL wm8904 1-001a: Control not supported for path ADCR -> [Right] -> AIFOUTL wm8904 1-001a: ASoC: no dapm match for ADCR --> Right --> AIFOUTL wm8904 1-001a: ASoC: Failed to add route ADCR -> Right -> AIFOUTL wm8904 1-001a: Control not supported for path ADCL -> [Left] -> AIFOUTR wm8904 1-001a: ASoC: no dapm match for ADCL --> Left --> AIFOUTR wm8904 1-001a: ASoC: Failed to add route ADCL -> Left -> AIFOUTR wm8904 1-001a: Control not supported for path ADCR -> [Right] -> AIFOUTR wm8904 1-001a: ASoC: no dapm match for ADCR --> Right --> AIFOUTR wm8904 1-001a: ASoC: Failed to add route ADCR -> Right -> AIFOUTR wm8904 1-001a: Control not supported for path AIFINR -> [Right] -> DACL wm8904 1-001a: ASoC: no dapm match for AIFINR --> Right --> DACL wm8904 1-001a: ASoC: Failed to add route AIFINR -> Right -> DACL wm8904 1-001a: Control not supported for path AIFINL -> [Left] -> DACL wm8904 1-001a: ASoC: no dapm match for AIFINL --> Left --> DACL wm8904 1-001a: ASoC: Failed to add route AIFINL -> Left -> DACL wm8904 1-001a: Control not supported for path AIFINR -> [Right] -> DACR wm8904 1-001a: ASoC: no dapm match for AIFINR --> Right --> DACR wm8904 1-001a: ASoC: Failed to add route AIFINR -> Right -> DACR wm8904 1-001a: Control not supported for path AIFINL -> [Left] -> DACR wm8904 1-001a: ASoC: no dapm match for AIFINL --> Left --> DACR wm8904 1-001a: ASoC: Failed to add route AIFINL -> Left -> DACR ---8<---
This patch is used to remove these warning.
Signed-off-by: Bo Shen voice.shen@atmel.com ---
sound/soc/codecs/wm8904.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 4d2d2b1..38582d7 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1076,10 +1076,10 @@ static const struct snd_soc_dapm_route adc_intercon[] = { { "Right Capture PGA", NULL, "Right Capture Mux" }, { "Right Capture PGA", NULL, "Right Capture Inverting Mux" },
- { "AIFOUTL", "Left", "ADCL" }, - { "AIFOUTL", "Right", "ADCR" }, - { "AIFOUTR", "Left", "ADCL" }, - { "AIFOUTR", "Right", "ADCR" }, + { "AIFOUTL", NULL, "ADCL" }, + { "AIFOUTL", NULL, "ADCR" }, + { "AIFOUTR", NULL, "ADCL" }, + { "AIFOUTR", NULL, "ADCR" },
{ "ADCL", NULL, "CLK_DSP" }, { "ADCL", NULL, "Left Capture PGA" }, @@ -1089,12 +1089,12 @@ static const struct snd_soc_dapm_route adc_intercon[] = { };
static const struct snd_soc_dapm_route dac_intercon[] = { - { "DACL", "Right", "AIFINR" }, - { "DACL", "Left", "AIFINL" }, + { "DACL", NULL, "AIFINR" }, + { "DACL", NULL, "AIFINL" }, { "DACL", NULL, "CLK_DSP" },
- { "DACR", "Right", "AIFINR" }, - { "DACR", "Left", "AIFINL" }, + { "DACR", NULL, "AIFINR" }, + { "DACR", NULL, "AIFINL" }, { "DACR", NULL, "CLK_DSP" },
{ "Charge pump", NULL, "SYSCLK" },
On Fri, Jan 09, 2015 at 04:53:40PM +0800, Bo Shen wrote:
As the commit 5fe5b76 (ASoC: dapm: Do not pretend to support controls for non mixer/mux widgets) remove the fake control.
Then, the wm8904 throw out the following warning at runtime. --->8--- wm8904 1-001a: Control not supported for path ADCL -> [Left] -> AIFOUTL wm8904 1-001a: ASoC: no dapm match for ADCL --> Left --> AIFOUTL wm8904 1-001a: ASoC: Failed to add route ADCL -> Left -> AIFOUTL wm8904 1-001a: Control not supported for path ADCR -> [Right] -> AIFOUTL wm8904 1-001a: ASoC: no dapm match for ADCR --> Right --> AIFOUTL wm8904 1-001a: ASoC: Failed to add route ADCR -> Right -> AIFOUTL wm8904 1-001a: Control not supported for path ADCL -> [Left] -> AIFOUTR wm8904 1-001a: ASoC: no dapm match for ADCL --> Left --> AIFOUTR wm8904 1-001a: ASoC: Failed to add route ADCL -> Left -> AIFOUTR wm8904 1-001a: Control not supported for path ADCR -> [Right] -> AIFOUTR wm8904 1-001a: ASoC: no dapm match for ADCR --> Right --> AIFOUTR wm8904 1-001a: ASoC: Failed to add route ADCR -> Right -> AIFOUTR wm8904 1-001a: Control not supported for path AIFINR -> [Right] -> DACL wm8904 1-001a: ASoC: no dapm match for AIFINR --> Right --> DACL wm8904 1-001a: ASoC: Failed to add route AIFINR -> Right -> DACL wm8904 1-001a: Control not supported for path AIFINL -> [Left] -> DACL wm8904 1-001a: ASoC: no dapm match for AIFINL --> Left --> DACL wm8904 1-001a: ASoC: Failed to add route AIFINL -> Left -> DACL wm8904 1-001a: Control not supported for path AIFINR -> [Right] -> DACR wm8904 1-001a: ASoC: no dapm match for AIFINR --> Right --> DACR wm8904 1-001a: ASoC: Failed to add route AIFINR -> Right -> DACR wm8904 1-001a: Control not supported for path AIFINL -> [Left] -> DACR wm8904 1-001a: ASoC: no dapm match for AIFINL --> Left --> DACR wm8904 1-001a: ASoC: Failed to add route AIFINL -> Left -> DACR ---8<---
This patch is used to remove these warning.
Signed-off-by: Bo Shen voice.shen@atmel.com
sound/soc/codecs/wm8904.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 4d2d2b1..38582d7 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1076,10 +1076,10 @@ static const struct snd_soc_dapm_route adc_intercon[] = { { "Right Capture PGA", NULL, "Right Capture Mux" }, { "Right Capture PGA", NULL, "Right Capture Inverting Mux" },
- { "AIFOUTL", "Left", "ADCL" },
- { "AIFOUTL", "Right", "ADCR" },
- { "AIFOUTR", "Left", "ADCL" },
- { "AIFOUTR", "Right", "ADCR" },
- { "AIFOUTL", NULL, "ADCL" },
- { "AIFOUTL", NULL, "ADCR" },
- { "AIFOUTR", NULL, "ADCL" },
- { "AIFOUTR", NULL, "ADCR" },
Is this the right fix here? I am not super familiar with the driver but it appears to contain an "AIFOUTL Mux" control which is not connected to anything. Looks like maybe this is a mistake the mux is indeded to be included in the path? Feels like we should either remove the control as well or hook it into the path.
Thanks, Charles
Hi Charles,
On 01/09/2015 07:16 PM, Charles Keepax wrote:
On Fri, Jan 09, 2015 at 04:53:40PM +0800, Bo Shen wrote:
As the commit 5fe5b76 (ASoC: dapm: Do not pretend to support controls for non mixer/mux widgets) remove the fake control.
Then, the wm8904 throw out the following warning at runtime. --->8--- wm8904 1-001a: Control not supported for path ADCL -> [Left] -> AIFOUTL wm8904 1-001a: ASoC: no dapm match for ADCL --> Left --> AIFOUTL wm8904 1-001a: ASoC: Failed to add route ADCL -> Left -> AIFOUTL wm8904 1-001a: Control not supported for path ADCR -> [Right] -> AIFOUTL wm8904 1-001a: ASoC: no dapm match for ADCR --> Right --> AIFOUTL wm8904 1-001a: ASoC: Failed to add route ADCR -> Right -> AIFOUTL wm8904 1-001a: Control not supported for path ADCL -> [Left] -> AIFOUTR wm8904 1-001a: ASoC: no dapm match for ADCL --> Left --> AIFOUTR wm8904 1-001a: ASoC: Failed to add route ADCL -> Left -> AIFOUTR wm8904 1-001a: Control not supported for path ADCR -> [Right] -> AIFOUTR wm8904 1-001a: ASoC: no dapm match for ADCR --> Right --> AIFOUTR wm8904 1-001a: ASoC: Failed to add route ADCR -> Right -> AIFOUTR wm8904 1-001a: Control not supported for path AIFINR -> [Right] -> DACL wm8904 1-001a: ASoC: no dapm match for AIFINR --> Right --> DACL wm8904 1-001a: ASoC: Failed to add route AIFINR -> Right -> DACL wm8904 1-001a: Control not supported for path AIFINL -> [Left] -> DACL wm8904 1-001a: ASoC: no dapm match for AIFINL --> Left --> DACL wm8904 1-001a: ASoC: Failed to add route AIFINL -> Left -> DACL wm8904 1-001a: Control not supported for path AIFINR -> [Right] -> DACR wm8904 1-001a: ASoC: no dapm match for AIFINR --> Right --> DACR wm8904 1-001a: ASoC: Failed to add route AIFINR -> Right -> DACR wm8904 1-001a: Control not supported for path AIFINL -> [Left] -> DACR wm8904 1-001a: ASoC: no dapm match for AIFINL --> Left --> DACR wm8904 1-001a: ASoC: Failed to add route AIFINL -> Left -> DACR ---8<---
This patch is used to remove these warning.
Signed-off-by: Bo Shen voice.shen@atmel.com
sound/soc/codecs/wm8904.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 4d2d2b1..38582d7 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1076,10 +1076,10 @@ static const struct snd_soc_dapm_route adc_intercon[] = { { "Right Capture PGA", NULL, "Right Capture Mux" }, { "Right Capture PGA", NULL, "Right Capture Inverting Mux" },
- { "AIFOUTL", "Left", "ADCL" },
- { "AIFOUTL", "Right", "ADCR" },
- { "AIFOUTR", "Left", "ADCL" },
- { "AIFOUTR", "Right", "ADCR" },
- { "AIFOUTL", NULL, "ADCL" },
- { "AIFOUTL", NULL, "ADCR" },
- { "AIFOUTR", NULL, "ADCL" },
- { "AIFOUTR", NULL, "ADCR" },
Is this the right fix here? I am not super familiar with the driver but it appears to contain an "AIFOUTL Mux" control which is not connected to anything. Looks like maybe this is a mistake the mux is indeded to be included in the path? Feels like we should either remove the control as well or hook it into the path.
Thank for your information. I think here it should correct the path name as --->8--- { "AIFOUTL Mux", "Left", "ADCL" }, { "AIFOUTL Mux", "Right", "ADCR" }, { "AIFOUTR Mux", "Left", "ADCL" }, { "AIFOUTR Mux", "Right", "ADCR" }, ---8<---
Thanks again. I will send out the new version.
Thanks, Charles
Best Regards, Bo Shen
On 01/12/2015 04:32 AM, Bo Shen wrote: [...]
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 4d2d2b1..38582d7 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1076,10 +1076,10 @@ static const struct snd_soc_dapm_route adc_intercon[] = { { "Right Capture PGA", NULL, "Right Capture Mux" }, { "Right Capture PGA", NULL, "Right Capture Inverting Mux" },
- { "AIFOUTL", "Left", "ADCL" },
- { "AIFOUTL", "Right", "ADCR" },
- { "AIFOUTR", "Left", "ADCL" },
- { "AIFOUTR", "Right", "ADCR" },
- { "AIFOUTL", NULL, "ADCL" },
- { "AIFOUTL", NULL, "ADCR" },
- { "AIFOUTR", NULL, "ADCL" },
- { "AIFOUTR", NULL, "ADCR" },
Is this the right fix here? I am not super familiar with the driver but it appears to contain an "AIFOUTL Mux" control which is not connected to anything. Looks like maybe this is a mistake the mux is indeded to be included in the path? Feels like we should either remove the control as well or hook it into the path.
Thank for your information. I think here it should correct the path name as --->8--- { "AIFOUTL Mux", "Left", "ADCL" }, { "AIFOUTL Mux", "Right", "ADCR" }, { "AIFOUTR Mux", "Left", "ADCL" }, { "AIFOUTR Mux", "Right", "ADCR" }, ---8<---
Thanks again. I will send out the new version.
Your probably also need to connect the mux to the output pins.
Hi Lars-Perter Clausen,
On 01/12/2015 05:30 PM, Lars-Peter Clausen wrote:
On 01/12/2015 04:32 AM, Bo Shen wrote: [...]
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 4d2d2b1..38582d7 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1076,10 +1076,10 @@ static const struct snd_soc_dapm_route adc_intercon[] = { { "Right Capture PGA", NULL, "Right Capture Mux" }, { "Right Capture PGA", NULL, "Right Capture Inverting Mux" },
- { "AIFOUTL", "Left", "ADCL" },
- { "AIFOUTL", "Right", "ADCR" },
- { "AIFOUTR", "Left", "ADCL" },
- { "AIFOUTR", "Right", "ADCR" },
- { "AIFOUTL", NULL, "ADCL" },
- { "AIFOUTL", NULL, "ADCR" },
- { "AIFOUTR", NULL, "ADCL" },
- { "AIFOUTR", NULL, "ADCR" },
Is this the right fix here? I am not super familiar with the driver but it appears to contain an "AIFOUTL Mux" control which is not connected to anything. Looks like maybe this is a mistake the mux is indeded to be included in the path? Feels like we should either remove the control as well or hook it into the path.
Thank for your information. I think here it should correct the path name as --->8--- { "AIFOUTL Mux", "Left", "ADCL" }, { "AIFOUTL Mux", "Right", "ADCR" }, { "AIFOUTR Mux", "Left", "ADCL" }, { "AIFOUTR Mux", "Right", "ADCR" }, ---8<---
Thanks again. I will send out the new version.
Your probably also need to connect the mux to the output pins.
Thanks for you information, after check the datasheet, I still don't know which the mux should connect to which output pins.
Best Regards, Bo Shen
On 01/13/2015 06:36 AM, Bo Shen wrote:
Hi Lars-Perter Clausen,
On 01/12/2015 05:30 PM, Lars-Peter Clausen wrote:
On 01/12/2015 04:32 AM, Bo Shen wrote: [...]
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 4d2d2b1..38582d7 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1076,10 +1076,10 @@ static const struct snd_soc_dapm_route adc_intercon[] = { { "Right Capture PGA", NULL, "Right Capture Mux" }, { "Right Capture PGA", NULL, "Right Capture Inverting Mux" },
- { "AIFOUTL", "Left", "ADCL" },
- { "AIFOUTL", "Right", "ADCR" },
- { "AIFOUTR", "Left", "ADCL" },
- { "AIFOUTR", "Right", "ADCR" },
- { "AIFOUTL", NULL, "ADCL" },
- { "AIFOUTL", NULL, "ADCR" },
- { "AIFOUTR", NULL, "ADCL" },
- { "AIFOUTR", NULL, "ADCR" },
Is this the right fix here? I am not super familiar with the driver but it appears to contain an "AIFOUTL Mux" control which is not connected to anything. Looks like maybe this is a mistake the mux is indeded to be included in the path? Feels like we should either remove the control as well or hook it into the path.
Thank for your information. I think here it should correct the path name as --->8--- { "AIFOUTL Mux", "Left", "ADCL" }, { "AIFOUTL Mux", "Right", "ADCR" }, { "AIFOUTR Mux", "Left", "ADCL" }, { "AIFOUTR Mux", "Right", "ADCR" }, ---8<---
Thanks again. I will send out the new version.
Your probably also need to connect the mux to the output pins.
Thanks for you information, after check the datasheet, I still don't know which the mux should connect to which output pins.
AIFOUTL Mux to AIFOUTL AIFOUTR Mux to AIFOUTR
Hi Lars-Peter Clausen,
On 01/13/2015 04:56 PM, Lars-Peter Clausen wrote:
On 01/13/2015 06:36 AM, Bo Shen wrote:
Hi Lars-Perter Clausen,
On 01/12/2015 05:30 PM, Lars-Peter Clausen wrote:
On 01/12/2015 04:32 AM, Bo Shen wrote: [...]
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 4d2d2b1..38582d7 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1076,10 +1076,10 @@ static const struct snd_soc_dapm_route adc_intercon[] = { { "Right Capture PGA", NULL, "Right Capture Mux" }, { "Right Capture PGA", NULL, "Right Capture Inverting Mux" },
- { "AIFOUTL", "Left", "ADCL" },
- { "AIFOUTL", "Right", "ADCR" },
- { "AIFOUTR", "Left", "ADCL" },
- { "AIFOUTR", "Right", "ADCR" },
- { "AIFOUTL", NULL, "ADCL" },
- { "AIFOUTL", NULL, "ADCR" },
- { "AIFOUTR", NULL, "ADCL" },
- { "AIFOUTR", NULL, "ADCR" },
Is this the right fix here? I am not super familiar with the driver but it appears to contain an "AIFOUTL Mux" control which is not connected to anything. Looks like maybe this is a mistake the mux is indeded to be included in the path? Feels like we should either remove the control as well or hook it into the path.
Thank for your information. I think here it should correct the path name as --->8--- { "AIFOUTL Mux", "Left", "ADCL" }, { "AIFOUTL Mux", "Right", "ADCR" }, { "AIFOUTR Mux", "Left", "ADCL" }, { "AIFOUTR Mux", "Right", "ADCR" }, ---8<---
Thanks again. I will send out the new version.
Your probably also need to connect the mux to the output pins.
Thanks for you information, after check the datasheet, I still don't know which the mux should connect to which output pins.
AIFOUTL Mux to AIFOUTL AIFOUTR Mux to AIFOUTR
Thanks. I will send new version patch for review.
Best Regards, Bo Shen
participants (3)
-
Bo Shen -
Charles Keepax -
Lars-Peter Clausen