[alsa-devel] [RFC PATCH] ucm: Add support for device positions
From: Mengdong Lin mengdong.lin@linux.intel.com
Users can provide prosition info of audio devices as a device value. This will help the sound server to choose an audio devices from some candidates based on the their locations and the status of the machine.
The value name is the "Postion", and its value should be a composition of "Top", "Bottom", "Left", "Right", "Front" and "Back". For example, a speaker may have a position like "Front Top".
The postion value can be got by either of the two APIs: - snd_use_case_get(), via identifier 'Postion/device', to get the original position string defined by the user. - snd_use_case_geti(), via identifier '_devpos/device', to get the integer value of the position. If the user has not define a position, 0 will be returned that means an unknown position.
Signed-off-by: Mengdong Lin mengdong.lin@linux.intel.com
diff --git a/include/use-case.h b/include/use-case.h index 8911645..b3b451b 100644 --- a/include/use-case.h +++ b/include/use-case.h @@ -165,6 +165,28 @@ extern "C" { #define SND_USE_CASE_TQ_VOICE "Voice" /**< Voice Tone Quality */ #define SND_USE_CASE_TQ_TONES "Tones" /**< Tones Tone Quality */
+ +/** + * Device Position bits + * + * 0 is reserved for unknown position in each dimesion. Users can get the + * integer value of the device postion by API snd_use_case_geti() via + * identifier '_devpos/device', and the returned value is a compostion of + * three dimesions. + * + * NOTE: Users can also get the position string like "Top Left" by API + * snd_use_case_get() via identifier 'Position/device". + */ +#define SND_USE_CASE_POS_LEFT (1<<0) +#define SND_USE_CASE_POS_RIGHT (2<<0) +#define SND_USE_CASE_POS_HORIZON_MASK (0xffff<<0) +#define SND_USE_CASE_POS_TOP (1<<4) +#define SND_USE_CASE_POS_BOTTOM (2<<4) +#define SND_USE_CASE_POS_VERTICAL_MASK (0xffff<<4) +#define SND_USE_CASE_POS_FRONT (1<<8) +#define SND_USE_CASE_POS_BACK (2<<8) +#define SND_USE_CASE_DEPTH_MASK (0xffff<<8) + /** use case container */ typedef struct snd_use_case_mgr snd_use_case_mgr_t;
@@ -319,6 +341,10 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr, * trick upper software layers to e.g. automatically mute speakers when * headphones are plugged in, but that's application policy * configuration that doesn't belong to UCM configuration files. + * - Position + * Position of the device, a composition of "Left", "Right", "Top", + * "Bottom", "Front" and "Back". For example, a device speaker may + * have a position like "Front Top". */ int snd_use_case_get(snd_use_case_mgr_t *uc_mgr, const char *identifier, diff --git a/src/ucm/main.c b/src/ucm/main.c index 2d33886..d196a57 100644 --- a/src/ucm/main.c +++ b/src/ucm/main.c @@ -801,6 +801,26 @@ long device_status(snd_use_case_mgr_t *uc_mgr, return 0; }
+/* get the device postion */ +long device_position(snd_use_case_mgr_t *uc_mgr, const char *device_name) +{ + struct use_case_device *dev; + struct list_head *pos, *base; + + if (uc_mgr->active_verb == NULL) + return -EINVAL; + + base = &uc_mgr->active_verb->device_list; + list_for_each(pos, base) { + dev = list_entry(pos, struct use_case_device, list); + if (strcmp(dev->name, device_name) == 0) + return dev->position; + } + + /* cannot find the device */ + return -1; +} + long modifier_status(snd_use_case_mgr_t *uc_mgr, const char *modifier_name) { @@ -1645,6 +1665,19 @@ int snd_use_case_geti(snd_use_case_mgr_t *uc_mgr, } else if (identifier[0] == '_') err = -ENOENT; #endif + } else if (check_identifier(identifier, "_devpos")) { + if (!str) { + err = -EINVAL; + goto __end; + } + + err = device_position(uc_mgr, str); + if (err >= 0) { + *value = err; + err = 0; + } else { + err = -EINVAL; + } } else err = -ENOENT; if (str) diff --git a/src/ucm/parser.c b/src/ucm/parser.c index 4dc35c3..fc035c3 100644 --- a/src/ucm/parser.c +++ b/src/ucm/parser.c @@ -55,6 +55,22 @@ static const char * const component_dir[] = { NULL, /* terminator */ };
+struct position { + int val; + const char *id; +}; + +/* device positions */ +static struct position positions[] = { + { SND_USE_CASE_POS_LEFT, "Left" }, + { SND_USE_CASE_POS_RIGHT, "Right" }, + { SND_USE_CASE_POS_TOP, "Top" }, + { SND_USE_CASE_POS_BOTTOM, "Bottom" }, + { SND_USE_CASE_POS_FRONT, "Front" }, + { SND_USE_CASE_POS_BACK, "Back" }, + { 0, NULL }, /* terminator */ +}; + static int filename_filter(const struct dirent *dirent); static int is_component_directory(const char *dir);
@@ -62,6 +78,30 @@ static int parse_sequence(snd_use_case_mgr_t *uc_mgr, struct list_head *base, snd_config_t *cfg);
+static unsigned int parse_position(struct list_head *value_list) +{ + struct list_head *pos; + struct ucm_value *val; + int i, position = 0; + + list_for_each(pos, value_list) { + val = list_entry(pos, struct ucm_value, list); + if (strncmp("Position", val->name, MAX_IDENTIFIER) == 0) { + i = 0; + while (positions[i].id) { + if (strstr(val->data, positions[i].id)) + position |= positions[i].val; + i++; + } + + return position; + } + } + + /* unknown position */ + return 0; +} + /* * Parse string */ @@ -870,6 +910,7 @@ static int parse_device(snd_use_case_mgr_t *uc_mgr, uc_error("error: failed to parse Value"); return err; } + device->position = parse_position(&device->value_list); continue; } } diff --git a/src/ucm/ucm_local.h b/src/ucm/ucm_local.h index 299a5b9..2537a1d 100644 --- a/src/ucm/ucm_local.h +++ b/src/ucm/ucm_local.h @@ -42,6 +42,7 @@
#define MAX_FILE 256 #define MAX_CARD_LONG_NAME 80 +#define MAX_IDENTIFIER 32 /* Max length of identifier string */ #define ALSA_USE_CASE_DIR ALSA_CONFIG_DIR "/ucm"
#define SEQUENCE_ELEMENT_TYPE_CDEV 1 @@ -139,6 +140,7 @@ struct use_case_device {
char *name; char *comment; + int position; /* bits of SND_USE_CASE_POS_, 0 for unknown position */
/* device enable and disable sequences */ struct list_head enable_list;
On Tue, Jan 03, 2017 at 02:09:18PM +0800, mengdong.lin@linux.intel.com wrote:
From: Mengdong Lin mengdong.lin@linux.intel.com
Users can provide prosition info of audio devices as a device value. This will help the sound server to choose an audio devices from some candidates based on the their locations and the status of the machine.
This is good thing to have but some bits are bit unclear to me atm. When you say device, do you mean sound card?
For me, position makes sense for dmics and speakers. So can you help me out by understanding how we can describe these...
The value name is the "Postion", and its value should be a composition of "Top", "Bottom", "Left", "Right", "Front" and "Back". For example, a speaker may have a position like "Front Top".
The postion value can be got by either of the two APIs:
- snd_use_case_get(), via identifier 'Postion/device', to get the original position string defined by the user.
- snd_use_case_geti(), via identifier '_devpos/device', to get the integer value of the position. If the user has not define a position, 0 will be returned that means an unknown position.
Signed-off-by: Mengdong Lin mengdong.lin@linux.intel.com
diff --git a/include/use-case.h b/include/use-case.h index 8911645..b3b451b 100644 --- a/include/use-case.h +++ b/include/use-case.h @@ -165,6 +165,28 @@ extern "C" { #define SND_USE_CASE_TQ_VOICE "Voice" /**< Voice Tone Quality */ #define SND_USE_CASE_TQ_TONES "Tones" /**< Tones Tone Quality */
+/**
- Device Position bits
- 0 is reserved for unknown position in each dimesion. Users can get the
- integer value of the device postion by API snd_use_case_geti() via
- identifier '_devpos/device', and the returned value is a compostion of
- three dimesions.
- NOTE: Users can also get the position string like "Top Left" by API
- snd_use_case_get() via identifier 'Position/device".
- */
+#define SND_USE_CASE_POS_LEFT (1<<0) +#define SND_USE_CASE_POS_RIGHT (2<<0) +#define SND_USE_CASE_POS_HORIZON_MASK (0xffff<<0) +#define SND_USE_CASE_POS_TOP (1<<4) +#define SND_USE_CASE_POS_BOTTOM (2<<4) +#define SND_USE_CASE_POS_VERTICAL_MASK (0xffff<<4) +#define SND_USE_CASE_POS_FRONT (1<<8) +#define SND_USE_CASE_POS_BACK (2<<8) +#define SND_USE_CASE_DEPTH_MASK (0xffff<<8)
/** use case container */ typedef struct snd_use_case_mgr snd_use_case_mgr_t;
@@ -319,6 +341,10 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
trick upper software layers to e.g. automatically mute speakers whenheadphones are plugged in, but that's application policyconfiguration that doesn't belong to UCM configuration files.
- Position
Position of the device, a composition of "Left", "Right", "Top",
"Bottom", "Front" and "Back". For example, a device speaker may*/
have a position like "Front Top".int snd_use_case_get(snd_use_case_mgr_t *uc_mgr, const char *identifier, diff --git a/src/ucm/main.c b/src/ucm/main.c index 2d33886..d196a57 100644 --- a/src/ucm/main.c +++ b/src/ucm/main.c @@ -801,6 +801,26 @@ long device_status(snd_use_case_mgr_t *uc_mgr, return 0; }
+/* get the device postion */ +long device_position(snd_use_case_mgr_t *uc_mgr, const char *device_name) +{
- struct use_case_device *dev;
- struct list_head *pos, *base;
- if (uc_mgr->active_verb == NULL)
return -EINVAL;- base = &uc_mgr->active_verb->device_list;
- list_for_each(pos, base) {
dev = list_entry(pos, struct use_case_device, list);if (strcmp(dev->name, device_name) == 0)return dev->position;- }
- /* cannot find the device */
- return -1;
+}
long modifier_status(snd_use_case_mgr_t *uc_mgr, const char *modifier_name) { @@ -1645,6 +1665,19 @@ int snd_use_case_geti(snd_use_case_mgr_t *uc_mgr, } else if (identifier[0] == '_') err = -ENOENT; #endif
} else if (check_identifier(identifier, "_devpos")) {if (!str) {err = -EINVAL;goto __end;}err = device_position(uc_mgr, str);if (err >= 0) {*value = err;err = 0;} else {err = -EINVAL;}diff --git a/src/ucm/parser.c b/src/ucm/parser.c index 4dc35c3..fc035c3 100644 --- a/src/ucm/parser.c +++ b/src/ucm/parser.c @@ -55,6 +55,22 @@ static const char * const component_dir[] = { NULL, /* terminator */ };
+struct position {
- int val;
- const char *id;
+};
+/* device positions */ +static struct position positions[] = {
- { SND_USE_CASE_POS_LEFT, "Left" },
- { SND_USE_CASE_POS_RIGHT, "Right" },
- { SND_USE_CASE_POS_TOP, "Top" },
- { SND_USE_CASE_POS_BOTTOM, "Bottom" },
- { SND_USE_CASE_POS_FRONT, "Front" },
- { SND_USE_CASE_POS_BACK, "Back" },
- { 0, NULL }, /* terminator */
+};
static int filename_filter(const struct dirent *dirent); static int is_component_directory(const char *dir);
@@ -62,6 +78,30 @@ static int parse_sequence(snd_use_case_mgr_t *uc_mgr, struct list_head *base, snd_config_t *cfg);
+static unsigned int parse_position(struct list_head *value_list) +{
- struct list_head *pos;
- struct ucm_value *val;
- int i, position = 0;
- list_for_each(pos, value_list) {
val = list_entry(pos, struct ucm_value, list);if (strncmp("Position", val->name, MAX_IDENTIFIER) == 0) {i = 0;while (positions[i].id) {if (strstr(val->data, positions[i].id))position |= positions[i].val;i++;}return position;}- }
- /* unknown position */
- return 0;
+}
/*
- Parse string
*/ @@ -870,6 +910,7 @@ static int parse_device(snd_use_case_mgr_t *uc_mgr, uc_error("error: failed to parse Value"); return err; }
device->position = parse_position(&device->value_list); continue;diff --git a/src/ucm/ucm_local.h b/src/ucm/ucm_local.h index 299a5b9..2537a1d 100644 --- a/src/ucm/ucm_local.h +++ b/src/ucm/ucm_local.h @@ -42,6 +42,7 @@
#define MAX_FILE 256 #define MAX_CARD_LONG_NAME 80 +#define MAX_IDENTIFIER 32 /* Max length of identifier string */ #define ALSA_USE_CASE_DIR ALSA_CONFIG_DIR "/ucm"
#define SEQUENCE_ELEMENT_TYPE_CDEV 1 @@ -139,6 +140,7 @@ struct use_case_device {
char *name; char *comment;
int position; /* bits of SND_USE_CASE_POS_, 0 for unknown position */
/* device enable and disable sequences */ struct list_head enable_list;
-- 2.7.4
On 01/03/2017 04:21 PM, Vinod Koul wrote:
On Tue, Jan 03, 2017 at 02:09:18PM +0800, mengdong.lin@linux.intel.com wrote:
From: Mengdong Lin mengdong.lin@linux.intel.com
Users can provide prosition info of audio devices as a device value. This will help the sound server to choose an audio devices from some candidates based on the their locations and the status of the machine.
This is good thing to have but some bits are bit unclear to me atm. When you say device, do you mean sound card?
No, the device here does not mean a sound card, but mean an I/O device like speaker or dmic, defined by 'SectionDevice'.
For me, position makes sense for dmics and speakers. So can you help me out by understanding how we can describe these...
For example, if there are two DMICs, one is in the front and one on the back, we can define their positions as below:
SectionDevice."MainMIC" {
...
EnableSequence [ ... ]
DisableSequence [ ... ]
Value { Position "Front" } }
SectionDevice."SecondaryMIC" {
...
EnableSequence [ ... ]
DisableSequence [ ... ]
Value { Position "Back" } }
Thanks Mengdong
On 01/03/2017 04:09 AM, Mengdong Lin wrote:
On 01/03/2017 04:21 PM, Vinod Koul wrote:
On Tue, Jan 03, 2017 at 02:09:18PM +0800, mengdong.lin@linux.intel.com wrote:
From: Mengdong Lin mengdong.lin@linux.intel.com
Users can provide prosition info of audio devices as a device value. This will help the sound server to choose an audio devices from some candidates based on the their locations and the status of the machine.
This is good thing to have but some bits are bit unclear to me atm. When you say device, do you mean sound card?
No, the device here does not mean a sound card, but mean an I/O device like speaker or dmic, defined by 'SectionDevice'.
For me, position makes sense for dmics and speakers. So can you help me out by understanding how we can describe these...
For example, if there are two DMICs, one is in the front and one on the back, we can define their positions as below:
SectionDevice."MainMIC" {
... EnableSequence [ ... ] DisableSequence [ ... ] Value { Position "Front" }}
SectionDevice."SecondaryMIC" {
... EnableSequence [ ... ] DisableSequence [ ... ] Value { Position "Back" }}
What is the entity that will make use of the position information? For what purpose? This type of information needs to be known at a lower level (typically a DSP), I wonder what UCM would do with it? Also it can be tricky to define left and right for a tablet which works in all possible orientations, you'd need sensor information to refine the position. And last if you have a mic or speaker array you'd need to provide geometrical information?
On Tue, 2017-01-03 at 08:50 -0600, Pierre-Louis Bossart wrote:
On 01/03/2017 04:09 AM, Mengdong Lin wrote:
On 01/03/2017 04:21 PM, Vinod Koul wrote:
On Tue, Jan 03, 2017 at 02:09:18PM +0800, mengdong.lin@linux.intel.com wrote:
From: Mengdong Lin mengdong.lin@linux.intel.com
Users can provide prosition info of audio devices as a device value. This will help the sound server to choose an audio devices from some candidates based on the their locations and the status of the machine.
This is good thing to have but some bits are bit unclear to me atm. When you say device, do you mean sound card?
No, the device here does not mean a sound card, but mean an I/O device like speaker or dmic, defined by 'SectionDevice'.
For me, position makes sense for dmics and speakers. So can you help me out by understanding how we can describe these...
For example, if there are two DMICs, one is in the front and one on the back, we can define their positions as below:
SectionDevice."MainMIC" {
... EnableSequence [ ... ] DisableSequence [ ... ] Value { Position "Front" }}
SectionDevice."SecondaryMIC" {
... EnableSequence [ ... ] DisableSequence [ ... ] Value { Position "Back" }}
What is the entity that will make use of the position information? For what purpose? This type of information needs to be known at a lower level (typically a DSP), I wonder what UCM would do with it? Also it can be tricky to define left and right for a tablet which works in all possible orientations, you'd need sensor information to refine the position. And last if you have a mic or speaker array you'd need to provide geometrical information?
This should actually be split into "location" and "position" (maybe better descriptors are available).
"location", mainly used by sound server to represent the device to the user (e.g. on a GUI) and handle changes to laptop physical configuration (device tilted, screen folded, etc)
"position", used by DSP for beamforming etc. Coords can be processed in userspace for any physical changes prior to being fed into DSP.
Liam
On Tue, 2017-01-03 at 14:09 +0800, mengdong.lin@linux.intel.com wrote:
From: Mengdong Lin mengdong.lin@linux.intel.com
Users can provide prosition info of audio devices as a device value. This will help the sound server to choose an audio devices from some candidates based on the their locations and the status of the machine.
The value name is the "Postion",
We should change this to "Location" and use "Position" for x,y,z coordinates of the device to help for beam forming etc (separate patch series for Position).
and its value should be a composition of "Top", "Bottom", "Left", "Right", "Front" and "Back". For example, a speaker may have a position like "Front Top".
The postion value can be got by either of the two APIs:
- snd_use_case_get(), via identifier 'Postion/device', to get the original position string defined by the user.
- snd_use_case_geti(), via identifier '_devpos/device', to get the integer value of the position. If the user has not define a position, 0 will be returned that means an unknown position.
Signed-off-by: Mengdong Lin mengdong.lin@linux.intel.com
diff --git a/include/use-case.h b/include/use-case.h index 8911645..b3b451b 100644 --- a/include/use-case.h +++ b/include/use-case.h @@ -165,6 +165,28 @@ extern "C" { #define SND_USE_CASE_TQ_VOICE "Voice" /**< Voice Tone Quality */ #define SND_USE_CASE_TQ_TONES "Tones" /**< Tones Tone Quality */
+/**
- Device Position bits
- 0 is reserved for unknown position in each dimesion. Users can get the
- integer value of the device postion by API snd_use_case_geti() via
- identifier '_devpos/device', and the returned value is a compostion of
- three dimesions.
- NOTE: Users can also get the position string like "Top Left" by API
- snd_use_case_get() via identifier 'Position/device".
- */
+#define SND_USE_CASE_POS_LEFT (1<<0) +#define SND_USE_CASE_POS_RIGHT (2<<0) +#define SND_USE_CASE_POS_HORIZON_MASK (0xffff<<0) +#define SND_USE_CASE_POS_TOP (1<<4) +#define SND_USE_CASE_POS_BOTTOM (2<<4) +#define SND_USE_CASE_POS_VERTICAL_MASK (0xffff<<4) +#define SND_USE_CASE_POS_FRONT (1<<8) +#define SND_USE_CASE_POS_BACK (2<<8) +#define SND_USE_CASE_DEPTH_MASK (0xffff<<8)
These are a little restrictive. It would be best to copy the other examples and use strings as users can easily append new locations by adding a string to a value list (without having to update any UCM core code).
We would have a set of the common default locations so that sound servers could use present this info to users in meaningful ways, bespoke locations could also be presented to users (but only in string format).
SectionDevice."Mic".0 {
EnableSequence [ .... ]
DisableSequence [ .... ]
Value { Location "Left" Position "19.5, 34.2, 3.1" } }
Using the above format means we just return the value of location to the client. We dont have to do any parsing or validation. Same applies for position.
Liam
/** use case container */ typedef struct snd_use_case_mgr snd_use_case_mgr_t;
@@ -319,6 +341,10 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
trick upper software layers to e.g. automatically mute speakers whenheadphones are plugged in, but that's application policyconfiguration that doesn't belong to UCM configuration files.
- Position
Position of the device, a composition of "Left", "Right", "Top",
"Bottom", "Front" and "Back". For example, a device speaker may*/
have a position like "Front Top".int snd_use_case_get(snd_use_case_mgr_t *uc_mgr, const char *identifier, diff --git a/src/ucm/main.c b/src/ucm/main.c index 2d33886..d196a57 100644 --- a/src/ucm/main.c +++ b/src/ucm/main.c @@ -801,6 +801,26 @@ long device_status(snd_use_case_mgr_t *uc_mgr, return 0; }
+/* get the device postion */ +long device_position(snd_use_case_mgr_t *uc_mgr, const char *device_name) +{
- struct use_case_device *dev;
- struct list_head *pos, *base;
- if (uc_mgr->active_verb == NULL)
return -EINVAL;- base = &uc_mgr->active_verb->device_list;
- list_for_each(pos, base) {
dev = list_entry(pos, struct use_case_device, list);if (strcmp(dev->name, device_name) == 0)return dev->position;- }
- /* cannot find the device */
- return -1;
+}
long modifier_status(snd_use_case_mgr_t *uc_mgr, const char *modifier_name) { @@ -1645,6 +1665,19 @@ int snd_use_case_geti(snd_use_case_mgr_t *uc_mgr, } else if (identifier[0] == '_') err = -ENOENT; #endif
} else if (check_identifier(identifier, "_devpos")) {if (!str) {err = -EINVAL;goto __end;}err = device_position(uc_mgr, str);if (err >= 0) {*value = err;err = 0;} else {err = -EINVAL;}diff --git a/src/ucm/parser.c b/src/ucm/parser.c index 4dc35c3..fc035c3 100644 --- a/src/ucm/parser.c +++ b/src/ucm/parser.c @@ -55,6 +55,22 @@ static const char * const component_dir[] = { NULL, /* terminator */ };
+struct position {
- int val;
- const char *id;
+};
+/* device positions */ +static struct position positions[] = {
- { SND_USE_CASE_POS_LEFT, "Left" },
- { SND_USE_CASE_POS_RIGHT, "Right" },
- { SND_USE_CASE_POS_TOP, "Top" },
- { SND_USE_CASE_POS_BOTTOM, "Bottom" },
- { SND_USE_CASE_POS_FRONT, "Front" },
- { SND_USE_CASE_POS_BACK, "Back" },
- { 0, NULL }, /* terminator */
+};
static int filename_filter(const struct dirent *dirent); static int is_component_directory(const char *dir);
@@ -62,6 +78,30 @@ static int parse_sequence(snd_use_case_mgr_t *uc_mgr, struct list_head *base, snd_config_t *cfg);
+static unsigned int parse_position(struct list_head *value_list) +{
- struct list_head *pos;
- struct ucm_value *val;
- int i, position = 0;
- list_for_each(pos, value_list) {
val = list_entry(pos, struct ucm_value, list);if (strncmp("Position", val->name, MAX_IDENTIFIER) == 0) {i = 0;while (positions[i].id) {if (strstr(val->data, positions[i].id))position |= positions[i].val;i++;}return position;}- }
- /* unknown position */
- return 0;
+}
/*
- Parse string
*/ @@ -870,6 +910,7 @@ static int parse_device(snd_use_case_mgr_t *uc_mgr, uc_error("error: failed to parse Value"); return err; }
device->position = parse_position(&device->value_list); continue;diff --git a/src/ucm/ucm_local.h b/src/ucm/ucm_local.h index 299a5b9..2537a1d 100644 --- a/src/ucm/ucm_local.h +++ b/src/ucm/ucm_local.h @@ -42,6 +42,7 @@
#define MAX_FILE 256 #define MAX_CARD_LONG_NAME 80 +#define MAX_IDENTIFIER 32 /* Max length of identifier string */ #define ALSA_USE_CASE_DIR ALSA_CONFIG_DIR "/ucm"
#define SEQUENCE_ELEMENT_TYPE_CDEV 1 @@ -139,6 +140,7 @@ struct use_case_device {
char *name; char *comment;
int position; /* bits of SND_USE_CASE_POS_, 0 for unknown position */
/* device enable and disable sequences */ struct list_head enable_list;
-----Original Message----- From: Liam Girdwood [mailto:liam.r.girdwood@linux.intel.com] Sent: Tuesday, January 3, 2017 10:59 PM
Users can provide prosition info of audio devices as a device value. This will help the sound server to choose an audio devices from some candidates based on the their locations and the status of the machine.
The value name is the "Postion",
We should change this to "Location" and use "Position" for x,y,z coordinates of the device to help for beam forming etc (separate patch series for Position).
Okay. "Location" seem better here.
and its value should be a composition of "Top", "Bottom", "Left", "Right", "Front" and "Back". For example, a speaker may have a position like "Front Top".
The postion value can be got by either of the two APIs:
- snd_use_case_get(), via identifier 'Postion/device', to get the original position string defined by the user.
- snd_use_case_geti(), via identifier '_devpos/device', to get the integer value of the position. If the user has not define a position, 0 will be returned that means an unknown position.
Signed-off-by: Mengdong Lin mengdong.lin@linux.intel.com
diff --git a/include/use-case.h b/include/use-case.h index 8911645..b3b451b 100644 --- a/include/use-case.h +++ b/include/use-case.h @@ -165,6 +165,28 @@ extern "C" { #define SND_USE_CASE_TQ_VOICE "Voice" /**< Voice
Tone Quality */
#define SND_USE_CASE_TQ_TONES "Tones" /**<
Tones Tone Quality */
+/**
- Device Position bits
- 0 is reserved for unknown position in each dimesion. Users can get
+the
- integer value of the device postion by API snd_use_case_geti() via
- identifier '_devpos/device', and the returned value is a
+compostion of
- three dimesions.
- NOTE: Users can also get the position string like "Top Left" by
+API
- snd_use_case_get() via identifier 'Position/device".
- */
+#define SND_USE_CASE_POS_LEFT (1<<0) +#define SND_USE_CASE_POS_RIGHT (2<<0) +#define SND_USE_CASE_POS_HORIZON_MASK (0xffff<<0) +#define SND_USE_CASE_POS_TOP (1<<4) +#define SND_USE_CASE_POS_BOTTOM (2<<4) +#define SND_USE_CASE_POS_VERTICAL_MASK (0xffff<<4) +#define SND_USE_CASE_POS_FRONT (1<<8) +#define SND_USE_CASE_POS_BACK (2<<8) +#define SND_USE_CASE_DEPTH_MASK (0xffff<<8)
These are a little restrictive. It would be best to copy the other examples and use strings as users can easily append new locations by adding a string to a value list (without having to update any UCM core code).
We would have a set of the common default locations so that sound servers could use present this info to users in meaningful ways, bespoke locations could also be presented to users (but only in string format).
SectionDevice."Mic".0 {
EnableSequence [ .... ]
DisableSequence [ .... ]
Value { Location "Left" Position "19.5, 34.2, 3.1" } }
Using the above format means we just return the value of location to the client. We dont have to do any parsing or validation. Same applies for position.
Liam
Okay. And If we only need to provide "Location" or "Position" in string format, current UCM code can already support it. We just need to specify these two variable names in the comments :-)
Users can get the info by API snd_use_case_get() with the identifier 'Location/device" or "Position/device" , e.g. "Location/Speaker".
Thanks Mengdong
participants (6)
-
Liam Girdwood -
Lin, Mengdong -
Mengdong Lin -
mengdong.lin＠linux.intel.com
-
Pierre-Louis Bossart -
Vinod Koul