1.remove unused item in DT 2.revise the format

Signed-off-by: Raphael-Xu 13691752556@139.com --- .../devicetree/bindings/sound/tas2780.yaml | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/tas2780.yaml b/Documentation/devicetree/bindings/sound/tas2780.yaml index 5a0de0995066..21389a16fdb9 100644 --- a/Documentation/devicetree/bindings/sound/tas2780.yaml +++ b/Documentation/devicetree/bindings/sound/tas2780.yaml @@ -22,24 +22,29 @@ properties: - ti,tas2780

reg: - maxItems: 1 - description: | - I2C address of the device can be between 0x38 to 0x45. + description: + I2C address of the device can be between 0x38 to 0x3f. + minimum: 0x38 + maximum: 0x3f

reset-gpios: - maxItems: 1 description: GPIO used to reset the device. + maxItems: 1

interrupts: maxItems: 1

ti,imon-slot-no: - $ref: /schemas/types.yaml#/definitions/uint32 description: TDM TX current sense time slot. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3

ti,vmon-slot-no: - $ref: /schemas/types.yaml#/definitions/uint32 description: TDM TX voltage sense time slot. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3

'#sound-dai-cells': const: 1 @@ -60,10 +65,8 @@ examples: compatible = "ti,tas2780"; reg = <0x38>; #sound-dai-cells = <1>; - interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpios = <&gpio1 15 0>; - shutdown-gpios = <&gpio1 15 0>; ti,imon-slot-no = <0>; ti,vmon-slot-no = <2>; };