[PATCH] ASoC: AMD: Use mixer control to switch between DMICs
Having mixer control to switch between DMICs prevents user to initiate capture simultaneously on both the DMIcs. Earlier 2 separate devices, one for each DMIC, gave an option of using them simultaneously, which is not supported.
Signed-off-by: Akshu Agrawal akshu.agrawal@amd.com --- sound/soc/amd/acp3x-rt5682-max9836.c | 43 +++++++++++----------------- 1 file changed, 16 insertions(+), 27 deletions(-)
diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c index e499c00e0c66..19f55a814547 100644 --- a/sound/soc/amd/acp3x-rt5682-max9836.c +++ b/sound/soc/amd/acp3x-rt5682-max9836.c @@ -188,25 +188,27 @@ static int acp3x_ec_dmic0_startup(struct snd_pcm_substream *substream)
machine->cap_i2s_instance = I2S_BT_INSTANCE; snd_soc_dai_set_bclk_ratio(codec_dai, 64); - if (dmic_sel) - gpiod_set_value(dmic_sel, 0);
return rt5682_clk_enable(substream); }
-static int acp3x_ec_dmic1_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_card *card = rtd->card; - struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - struct acp3x_platform_info *machine = snd_soc_card_get_drvdata(card); +static int front_mic_enabled;
- machine->cap_i2s_instance = I2S_BT_INSTANCE; - snd_soc_dai_set_bclk_ratio(codec_dai, 64); - if (dmic_sel) - gpiod_set_value(dmic_sel, 1); +static int front_mic_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = front_mic_enabled; + return 0; +}
- return rt5682_clk_enable(substream); +static int front_mic_set(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + if (dmic_sel) { + front_mic_enabled = ucontrol->value.integer.value[0]; + gpiod_set_value(dmic_sel, !front_mic_enabled); + } + return 0; }
static void rt5682_shutdown(struct snd_pcm_substream *substream) @@ -229,11 +231,6 @@ static const struct snd_soc_ops acp3x_ec_cap0_ops = { .shutdown = rt5682_shutdown, };
-static const struct snd_soc_ops acp3x_ec_cap1_ops = { - .startup = acp3x_ec_dmic1_startup, - .shutdown = rt5682_shutdown, -}; - SND_SOC_DAILINK_DEF(acp3x_i2s, DAILINK_COMP_ARRAY(COMP_CPU("acp3x_i2s_playcap.0"))); SND_SOC_DAILINK_DEF(acp3x_bt, @@ -279,15 +276,6 @@ static struct snd_soc_dai_link acp3x_dai_5682_98357[] = { .ops = &acp3x_ec_cap0_ops, SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform), }, - { - .name = "acp3x-ec-dmic1-capture", - .stream_name = "Capture DMIC1", - .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBS_CFS, - .dpcm_capture = 1, - .ops = &acp3x_ec_cap1_ops, - SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform), - }, };
static const struct snd_soc_dapm_widget acp3x_widgets[] = { @@ -307,6 +295,7 @@ static const struct snd_kcontrol_new acp3x_mc_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone Jack"), SOC_DAPM_PIN_SWITCH("Spk"), SOC_DAPM_PIN_SWITCH("Headset Mic"), + SOC_SINGLE_BOOL_EXT("Front Mic", 0, front_mic_get, front_mic_set), };
static struct snd_soc_card acp3x_card = {
On Wed, May 27, 2020 at 07:10:16AM +0530, Akshu Agrawal wrote:
- SOC_SINGLE_BOOL_EXT("Front Mic", 0, front_mic_get, front_mic_set),
This should probably be a mux with two labelled options, or if it's a boolean control it should end in Switch. A mux definitely seems like a better option though.
On 5/27/2020 4:57 PM, Mark Brown wrote:
On Wed, May 27, 2020 at 07:10:16AM +0530, Akshu Agrawal wrote:
- SOC_SINGLE_BOOL_EXT("Front Mic", 0, front_mic_get, front_mic_set),
This should probably be a mux with two labelled options, or if it's a boolean control it should end in Switch. A mux definitely seems like a better option though.
Actually it's a dmic switch, so will change it to boolean control named "DMIC switch". Front or rear mic might change with variants.
Thanks,
Akshu
participants (3)
-
Agrawal, Akshu
-
Akshu Agrawal
-
Mark Brown