Questions about driver implementation (1 I2S controller to 2 codecs)
Hi,
I'm trying to add support for a new board that uses the Ingenic JZ4770 SoC.
This SoC has a I2S/AC97 controller, and has an internal codec. The controller has a register switch to select either the internal codec, or an external codec; both cannot be enabled at the same time.
On this board, the external speakers / audio line are wired to the internal codec, while a HDMI chip (ITE66121) is wired as the external codec.
I'm having a hard time trying to figure out how the codec selection switch should be exported. Should it be a regular widget, and the user is responsible for selecting the right codec? Should it be a DAPM, and plugging the HDMI cable auto-enables the switch? Is this configuration (one controller to two codecs) already somehow supported by ALSA?
Right now we're using a "simple-audio-card" in the device tree, and trying to add HDMI sound support. I am not even sure if we should be using one sound card with the two codecs, or one sound card per codec, sharing the same I2S controller?
Any thoughts?
Thanks, -Paul
Paul Cercueil paul@crapouillou.net writes:
Hi,
I'm trying to add support for a new board that uses the Ingenic JZ4770 SoC.
This SoC has a I2S/AC97 controller, and has an internal codec. The controller has a register switch to select either the internal codec, or an external codec; both cannot be enabled at the same time.
On this board, the external speakers / audio line are wired to the internal codec, while a HDMI chip (ITE66121) is wired as the external codec.
I'm having a hard time trying to figure out how the codec selection switch should be exported. Should it be a regular widget, and the user is responsible for selecting the right codec? Should it be a DAPM, and plugging the HDMI cable auto-enables the switch? Is this configuration (one controller to two codecs) already somehow supported by ALSA?
Right now we're using a "simple-audio-card" in the device tree, and trying to add HDMI sound support. I am not even sure if we should be using one sound card with the two codecs, or one sound card per codec, sharing the same I2S controller?
Any thoughts?
Thanks, -Paul
I'm also interested in this, although I'm using a different Ingenic SoC (also using jz4740-i2s). In my case I have a microphone connected to the internal codec and an external codec for playback.
Some thoughts: maybe DPCM is what we want? There's three DAIs: the CPU, the internal codec, and the external codec. The I2S controller selects which codec DAI the CPU DAI is connected to. DPCM seems to be the only thing in ALSA that deals with dynamic DAI <-> DAI connections. I can't figure it out though; the documentation is too sparse and DPCM-enabled drivers are complicated beasts.
Codec selection should probably be left up to userspace though. ALSA isn't really in a position to make routing decisions like that, there is no one-size-fits-all approach that'd be suitable for every board.
What ALSA _can_ do is respond to the user's audio routing choice and look at the machine state (jacks/connectors, muxes, mixers, etc), and power things up or down as appropriate.
Regards, Aidan
participants (2)
-
Aidan MacDonald -
Paul Cercueil