There is no need to provide defaults for the volatile registers and doing so might cause confusion.

Signed-off-by: Leon Romanovsky leon@leon.nu --- sound/soc/codecs/alc5632.c | 7 ------- 1 files changed, 0 insertions(+), 7 deletions(-)

diff --git a/sound/soc/codecs/alc5632.c b/sound/soc/codecs/alc5632.c index c32eade..2d77665 100644 --- a/sound/soc/codecs/alc5632.c +++ b/sound/soc/codecs/alc5632.c @@ -36,7 +36,6 @@ * ALC5632 register cache */ static struct reg_default alc5632_reg_defaults[] = { - { 0, 0x59B4 }, /* R0 - Reset */ { 2, 0x8080 }, /* R2 - Speaker Output Volume */ { 4, 0x8080 }, /* R4 - Headphone Output Volume */ { 6, 0x8080 }, /* R6 - AUXOUT Volume */ @@ -52,7 +51,6 @@ static struct reg_default alc5632_reg_defaults[] = { { 34, 0x0000 }, /* R34 - Microphone Control */ { 36, 0x00C0 }, /* R36 - Codec Digital MIC/Digital Boost Control */ - { 38, 0xEF00 }, /* R38 - Power Down Control/Status */ { 46, 0x0000 }, /* R46 - Stereo DAC/Voice DAC/Stereo ADC Function Select */ { 52, 0x8000 }, /* R52 - Main Serial Data Port Control @@ -70,9 +68,7 @@ static struct reg_default alc5632_reg_defaults[] = { { 78, 0xBE3E }, /* R78 - GPIO Pin Polarity */ { 80, 0x0000 }, /* R80 - GPIO Pin Sticky */ { 82, 0x0000 }, /* R82 - GPIO Pin Wake Up */ - { 84, 0x803A }, /* R84 - GPIO Pin Status */ { 86, 0x0000 }, /* R86 - Pin Sharing */ - { 88, 0x0000 }, /* R88 - Over-Temp/Current Status */ { 90, 0x0009 }, /* R90 - Soft Volume Control Setting */ { 92, 0x0000 }, /* R92 - GPIO_Output Pin Control */ { 94, 0x3000 }, /* R94 - MISC Control */ @@ -82,9 +78,6 @@ static struct reg_default alc5632_reg_defaults[] = { { 104, 0x0553 }, /* R104 - Pseudo Stereo and Spatial Effect Block Control */ { 106, 0x0000 }, /* R106 - Private Register Address */ - { 108, 0x0000 }, /* R108 - Private Register Data */ - { 110, 0x0000 }, /* R110 - EQ Control and Status/ADC - HPF Control */ };

/* codec private data */