Some motherboards have multiple HDA codecs connected to the serial bus. The current code may create multiple mixer controls with the almost identical identification.

The current code use id.device field from the control element structure to store the codec address to avoid such clashes for multiple codecs. Unfortunately, the user space do not handle this correctly. For mixer controls, only name and index are used for the identifiers.

This patch fixes this problem to compose the index using the codec address as an offset in case, when the control already exists. It is really unlikely that one codec will create 10 similar controls.

This patch adds new kernel module parameter 'ctl_dev_id' to allow select the old behaviour, too. The CONFIG_SND_HDA_CTL_DEV_ID Kconfig option sets the default value.

BugLink: https://github.com/alsa-project/alsa-lib/issues/294 BugLink: https://github.com/alsa-project/alsa-lib/issues/205 Fixes: 54d174031576 ("[ALSA] hda-codec - Fix connection list parsing") Fixes: 1afe206ab699 ("ALSA: hda - Try to find an empty control index when it's occupied") Signed-off-by: Jaroslav Kysela perex@perex.cz

--

rfc..v1: - added CONFIG_SND_HDA_CTL_DEV_ID Kconfig option --- include/sound/hda_codec.h | 1 + sound/pci/hda/Kconfig | 14 ++++++++++++++ sound/pci/hda/hda_codec.c | 13 ++++++++++--- sound/pci/hda/hda_controller.c | 1 + sound/pci/hda/hda_controller.h | 1 + sound/pci/hda/hda_intel.c | 6 ++++++ 6 files changed, 33 insertions(+), 3 deletions(-)

diff --git a/include/sound/hda_codec.h b/include/sound/hda_codec.h index eba23daf2c29..bbb7805e85d8 100644 --- a/include/sound/hda_codec.h +++ b/include/sound/hda_codec.h @@ -259,6 +259,7 @@ struct hda_codec { unsigned int relaxed_resume:1; /* don't resume forcibly for jack */ unsigned int forced_resume:1; /* forced resume for jack */ unsigned int no_stream_clean_at_suspend:1; /* do not clean streams at suspend */ + unsigned int ctl_dev_id:1; /* old control element id build behaviour */

#ifdef CONFIG_PM unsigned long power_on_acct; diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index 06d304db4183..886255a03e8b 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -302,6 +302,20 @@ config SND_HDA_INTEL_HDMI_SILENT_STREAM This feature can impact power consumption as resources are kept reserved both at transmitter and receiver.

+config SND_HDA_CTL_DEV_ID + bool "Use the device identifier field for controls" + depends on SND_HDA_INTEL + help + Say Y to use the device identifier field for (mixer) + controls (old behaviour until this option is available). + + When enabled, the multiple HDA codecs may set the device + field in control (mixer) element identifiers. The use + of this field is not recommended and defined for mixer controls. + + The old behaviour (Y) is obsolete and will be removed. Consider + to not enable this option. + endif

endmenu diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index edd653ece70d..8f20abc036bf 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3390,7 +3390,12 @@ int snd_hda_add_new_ctls(struct hda_codec *codec, kctl = snd_ctl_new1(knew, codec); if (!kctl) return -ENOMEM; - if (addr > 0) + /* Do not use the id.device field for MIXER elements. + * This field is for real device numbers (like PCM) but codecs + * are hidden components from the user space view (unrelated + * to the mixer element identification). + */ + if (addr > 0 && codec->ctl_dev_id) kctl->id.device = addr; if (idx > 0) kctl->id.index = idx; @@ -3401,9 +3406,11 @@ int snd_hda_add_new_ctls(struct hda_codec *codec, * the codec addr; if it still fails (or it's the * primary codec), then try another control index */ - if (!addr && codec->core.addr) + if (!addr && codec->core.addr) { addr = codec->core.addr; - else if (!idx && !knew->index) { + if (!codec->ctl_dev_id) + idx += 10 * addr; + } else if (!idx && !knew->index) { idx = find_empty_mixer_ctl_idx(codec, knew->name, 0); if (idx <= 0) diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c index 0ff286b7b66b..083df287c1a4 100644 --- a/sound/pci/hda/hda_controller.c +++ b/sound/pci/hda/hda_controller.c @@ -1231,6 +1231,7 @@ int azx_probe_codecs(struct azx *chip, unsigned int max_slots) continue; codec->jackpoll_interval = chip->jackpoll_interval; codec->beep_mode = chip->beep_mode; + codec->ctl_dev_id = chip->ctl_dev_id; codecs++; } } diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h index f5bf295eb830..8556031bcd68 100644 --- a/sound/pci/hda/hda_controller.h +++ b/sound/pci/hda/hda_controller.h @@ -124,6 +124,7 @@ struct azx { /* HD codec */ int codec_probe_mask; /* copied from probe_mask option */ unsigned int beep_mode; + bool ctl_dev_id;

#ifdef CONFIG_SND_HDA_PATCH_LOADER const struct firmware *fw; diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 87002670c0c9..048656234280 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -119,6 +119,8 @@ static bool beep_mode[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = CONFIG_SND_HDA_INPUT_BEEP_MODE}; #endif static bool dmic_detect = 1; +static bool ctl_dev_id[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = + CONFIG_SND_HDA_CTL_DEV_ID};

module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for Intel HD audio interface."); @@ -157,6 +159,8 @@ module_param(dmic_detect, bool, 0444); MODULE_PARM_DESC(dmic_detect, "Allow DSP driver selection (bypass this driver) " "(0=off, 1=on) (default=1); " "deprecated, use snd-intel-dspcfg.dsp_driver option instead"); +module_param_array(ctl_dev_id, bool, NULL, 0444); +MODULE_PARM_DESC(ctl_dev_id, "Use control device identifier (based on codec address).");

#ifdef CONFIG_PM static int param_set_xint(const char *val, const struct kernel_param *kp); @@ -2278,6 +2282,8 @@ static int azx_probe_continue(struct azx *chip) chip->beep_mode = beep_mode[dev]; #endif

+ chip->ctl_dev_id = ctl_dev_id[dev]; + /* create codec instances */ if (bus->codec_mask) { err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);