Currently, we have to select these symbols explictly via Kconfig, from another entry. If we plan to use generic audio drivers like simple-audio-card, the user need to be able to enable these symbols directly via the menuconfig.

Signed-off-by: Romain Perier romain.perier@collabora.com ---

Changes in v7: - Added this commit

sound/soc/codecs/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 9e1718a..cfa4233 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -528,12 +528,12 @@ config SND_SOC_ES8328 tristate "Everest Semi ES8328 CODEC"

config SND_SOC_ES8328_I2C - tristate - select SND_SOC_ES8328 + depends on SND_SOC_ES8328 + tristate "I2C support for Everest Semi ES8328 CODEC"

config SND_SOC_ES8328_SPI - tristate - select SND_SOC_ES8328 + depends on SND_SOC_ES8328 + tristate "SPI support for Everest Semi ES8328 CODEC"

config SND_SOC_GTM601 tristate 'GTM601 UMTS modem audio codec'

The driver is used for Rockchip rk3288-based boards using a configurable analog output (can be an headphone) and the built-in HDMI audio output that is part of the RK3288 SoCs and use the Alsa HDMI codec driver. For some rk3288-based boards the analog output and the hdmi audio are plugged on the same i2s line, so we have to do the same in the driver by using a DAI link CPU to multicodecs. This configuration can be found for example on the Radxa Rock2 or the Firefly-RK3288.

This commit is based on the initial work that was done by Sjoerd Simons sjoerd.simons@collabora.com with some improvements.

Signed-off-by: Romain Perier romain.perier@collabora.com ---

Changes in v7: - No longer select SND_SOC_ES8328_I2C from kconfig (as this driver is dynamic and genric for analog outputs) Changes in v6: - Fixed bad error handling for gpios in the probe function - Replaced 'codec clock' by 'cpu clock' for set_sysclk for cpu_dai Changes in v5: - Fixed error handling for gpios in the probe function Changes in v4: - Added support for multi codecs in the asoc machine driver, so the driver matches the hw architecture (analog and hdmi audio are connected on the same i2s line) - Renamed the driver to rk3288-hdmi-analog.c - Changed some variables names due to this renaming - Changed the documentation - Added built-in support for hdmi audio in this driver - Added support for the property 'rockchip,routing'

Changes in v3: - Cosmetic changes - Added missing email to MODULE_AUTHOR Changes in v2: - Fixed wrong dependencies for SND_SOC_ROCKCHIP_ES8388, SND_SOC_ROCKCHIP_I2S was selected with unmet direct dependencies

.../bindings/sound/rockchip,rk3288-hdmi-analog.txt | 36 +++ sound/soc/rockchip/Kconfig | 9 + sound/soc/rockchip/Makefile | 2 + sound/soc/rockchip/rk3288_hdmi_analog.c | 299 +++++++++++++++++++++ 4 files changed, 346 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt create mode 100644 sound/soc/rockchip/rk3288_hdmi_analog.c

diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt new file mode 100644 index 0000000..2539e1d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt @@ -0,0 +1,36 @@ +ROCKCHIP RK3288 with HDMI and analog audio + +Required properties: +- compatible: "rockchip,rk3288-hdmi-analog" +- rockchip,model: The user-visible name of this sound complex +- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's + connected to the CODEC +- rockchip,audio-codec: The phandle of the analog audio codec. +- rockchip,routing: A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. For this driver the first string should always be + "Analog". + +Optionnal properties: +- rockchip,hp-en-gpios = The phandle of the GPIO that power up/down the + headphone (when the analog output is an headphone). +- rockchip,hp-det-gpios = The phandle of the GPIO that detects the headphone + (when the analog output is an headphone). +- pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt + +Example: + +sound { + compatible = "rockchip,rockchip-audio-es8388"; + rockchip,model = "Analog audio output"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&es8388>; + rockchip,routing = "Analog", "LOUT2", + "Analog", "ROUT2"; + rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; + rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&headphone>; +}; + diff --git a/sound/soc/rockchip/Kconfig b/sound/soc/rockchip/Kconfig index c783f9a..e3ca1e9 100644 --- a/sound/soc/rockchip/Kconfig +++ b/sound/soc/rockchip/Kconfig @@ -42,6 +42,15 @@ config SND_SOC_ROCKCHIP_RT5645 Say Y or M here if you want to add support for SoC audio on Rockchip boards using the RT5645/RT5650 codec, such as Veyron.

+config SND_SOC_RK3288_HDMI_ANALOG + tristate "ASoC support multiple codecs for Rockchip RK3288 boards" + depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && CLKDEV_LOOKUP + select SND_SOC_ROCKCHIP_I2S + select SND_SOC_HDMI_CODEC + help + Say Y or M here if you want to add support for SoC audio on Rockchip + RK3288 boards using an analog output and the built-in HDMI audio. + config SND_SOC_RK3399_GRU_SOUND tristate "ASoC support multiple codecs for Rockchip RK3399 GRU boards" depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && CLKDEV_LOOKUP && SPI diff --git a/sound/soc/rockchip/Makefile b/sound/soc/rockchip/Makefile index 84e5c7c..991f91b 100644 --- a/sound/soc/rockchip/Makefile +++ b/sound/soc/rockchip/Makefile @@ -7,8 +7,10 @@ obj-$(CONFIG_SND_SOC_ROCKCHIP_SPDIF) += snd-soc-rockchip-spdif.o

snd-soc-rockchip-max98090-objs := rockchip_max98090.o snd-soc-rockchip-rt5645-objs := rockchip_rt5645.o +snd-soc-rk3288-hdmi-analog-objs := rk3288_hdmi_analog.o snd-soc-rk3399-gru-sound-objs := rk3399_gru_sound.o

obj-$(CONFIG_SND_SOC_ROCKCHIP_MAX98090) += snd-soc-rockchip-max98090.o obj-$(CONFIG_SND_SOC_ROCKCHIP_RT5645) += snd-soc-rockchip-rt5645.o +obj-$(CONFIG_SND_SOC_RK3288_HDMI_ANALOG) += snd-soc-rk3288-hdmi-analog.o obj-$(CONFIG_SND_SOC_RK3399_GRU_SOUND) += snd-soc-rk3399-gru-sound.o diff --git a/sound/soc/rockchip/rk3288_hdmi_analog.c b/sound/soc/rockchip/rk3288_hdmi_analog.c new file mode 100644 index 0000000..b60abf3 --- /dev/null +++ b/sound/soc/rockchip/rk3288_hdmi_analog.c @@ -0,0 +1,299 @@ +/* + * Rockchip machine ASoC driver for RK3288 boards that have an HDMI and analog + * audio output + * + * Copyright (c) 2016, Collabora Ltd. + * + * Authors: Sjoerd Simons sjoerd.simons@collabora.com, + * Romain Perier romain.perier@collabora.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see http://www.gnu.org/licenses/. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <sound/core.h> +#include <sound/jack.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include "rockchip_i2s.h" + +#define DRV_NAME "rk3288-snd-hdmi-analog" + +struct rk_drvdata { + int gpio_hp_en; + int gpio_hp_det; +}; + +static int rk_hp_power(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + struct rk_drvdata *machine = snd_soc_card_get_drvdata(w->dapm->card); + + if (!gpio_is_valid(machine->gpio_hp_en)) + return 0; + + gpio_set_value_cansleep(machine->gpio_hp_en, + SND_SOC_DAPM_EVENT_ON(event)); + + return 0; +} + +static struct snd_soc_jack headphone_jack; +static struct snd_soc_jack_pin headphone_jack_pins[] = { + { + .pin = "Analog", + .mask = SND_JACK_HEADPHONE + }, +}; + +static const struct snd_soc_dapm_widget rk_dapm_widgets[] = { + SND_SOC_DAPM_HP("Analog", rk_hp_power), + SND_SOC_DAPM_LINE("HDMI", NULL), +}; + +static const struct snd_kcontrol_new rk_mc_controls[] = { + SOC_DAPM_PIN_SWITCH("Analog"), + SOC_DAPM_PIN_SWITCH("HDMI"), +}; + +static int rk_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + int ret = 0; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int mclk; + + switch (params_rate(params)) { + case 8000: + case 16000: + case 24000: + case 32000: + case 48000: + case 64000: + case 96000: + mclk = 12288000; + break; + case 11025: + case 22050: + case 44100: + case 88200: + mclk = 11289600; + break; + default: + return -EINVAL; + } + + ret = snd_soc_dai_set_sysclk(cpu_dai, 0, mclk, + SND_SOC_CLOCK_OUT); + + if (ret && ret != -ENOTSUPP) { + dev_err(codec_dai->dev, "Can't set cpu clock %d\n", ret); + return ret; + } + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, mclk, + SND_SOC_CLOCK_IN); + if (ret && ret != -ENOTSUPP) { + dev_err(codec_dai->dev, "Can't set codec clock %d\n", ret); + return ret; + } + + return 0; +} + +static struct snd_soc_jack_gpio rk_hp_jack_gpio = { + .name = "Headphone detection", + .report = SND_JACK_HEADPHONE, + .debounce_time = 150 +}; + +static int rk_init(struct snd_soc_pcm_runtime *runtime) +{ + struct rk_drvdata *machine = snd_soc_card_get_drvdata(runtime->card); + + /* Enable Headset Jack detection */ + if (gpio_is_valid(machine->gpio_hp_det)) { + snd_soc_card_jack_new(runtime->card, "Headphone Jack", + SND_JACK_HEADPHONE, &headphone_jack, + headphone_jack_pins, + ARRAY_SIZE(headphone_jack_pins)); + rk_hp_jack_gpio.gpio = machine->gpio_hp_det; + snd_soc_jack_add_gpios(&headphone_jack, 1, &rk_hp_jack_gpio); + } + + return 0; +} + +static struct snd_soc_ops rk_ops = { + .hw_params = rk_hw_params, +}; + +static struct snd_soc_dai_link_component rk_codecs[] = { + { }, + { + .name = "hdmi-audio-codec.2.auto", + .dai_name = "hdmi-hifi.0", + }, +}; + +static struct snd_soc_dai_link rk_dailink = { + .name = "Codecs", + .stream_name = "Audio", + .init = rk_init, + .ops = &rk_ops, + .codecs = rk_codecs, + .num_codecs = ARRAY_SIZE(rk_codecs), + /* Set codecs as slave */ + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS, +}; + +static struct snd_soc_card snd_soc_card_rk = { + .name = "ROCKCHIP-I2S", + .dai_link = &rk_dailink, + .num_links = 1, + .num_aux_devs = 0, + .dapm_widgets = rk_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(rk_dapm_widgets), + .controls = rk_mc_controls, + .num_controls = ARRAY_SIZE(rk_mc_controls), +}; + +static int snd_rk_mc_probe(struct platform_device *pdev) +{ + int ret = 0; + struct snd_soc_card *card = &snd_soc_card_rk; + struct device_node *np = pdev->dev.of_node; + struct rk_drvdata *machine; + struct of_phandle_args args; + + machine = devm_kzalloc(&pdev->dev, sizeof(struct rk_drvdata), + GFP_KERNEL); + if (!machine) + return -ENOMEM; + + card->dev = &pdev->dev; + + machine->gpio_hp_det = of_get_named_gpio(np, + "rockchip,hp-det-gpios", 0); + if (!gpio_is_valid(machine->gpio_hp_det) && machine->gpio_hp_det != -ENODEV) + return machine->gpio_hp_det; + + machine->gpio_hp_en = of_get_named_gpio(np, + "rockchip,hp-en-gpios", 0); + if (!gpio_is_valid(machine->gpio_hp_en) && machine->gpio_hp_en != -ENODEV) + return machine->gpio_hp_en; + + if (gpio_is_valid(machine->gpio_hp_en)) { + ret = devm_gpio_request_one(&pdev->dev, machine->gpio_hp_en, + GPIOF_OUT_INIT_LOW, "hp_en"); + if (ret) { + dev_err(card->dev, "cannot get hp_en gpio\n"); + return ret; + } + } + + ret = snd_soc_of_parse_card_name(card, "rockchip,model"); + if (ret) { + dev_err(card->dev, "SoC parse card name failed %d\n", ret); + return ret; + } + + rk_dailink.codecs[0].of_node = of_parse_phandle(np, + "rockchip,audio-codec", + 0); + if (!rk_dailink.codecs[0].of_node) { + dev_err(&pdev->dev, + "Property 'rockchip,audio-codec' missing or invalid\n"); + return -EINVAL; + } + ret = of_parse_phandle_with_fixed_args(np, "rockchip,audio-codec", + 0, 0, &args); + if (ret) { + dev_err(&pdev->dev, + "Unable to parse property 'rockchip,audio-codec'\n"); + return ret; + } + + ret = snd_soc_get_dai_name(&args, &rk_dailink.codecs[0].dai_name); + if (ret) { + dev_err(&pdev->dev, "Unable to get codec_dai_name\n"); + return ret; + } + + rk_dailink.cpu_of_node = of_parse_phandle(np, "rockchip,i2s-controller", + 0); + if (!rk_dailink.cpu_of_node) { + dev_err(&pdev->dev, + "Property 'rockchip,i2s-controller' missing or invalid\n"); + return -EINVAL; + } + + rk_dailink.platform_of_node = rk_dailink.cpu_of_node; + + ret = snd_soc_of_parse_audio_routing(card, "rockchip,routing"); + if (ret) { + dev_err(&pdev->dev, + "Unable to parse 'rockchip,routing' property\n"); + return ret; + } + + snd_soc_card_set_drvdata(card, machine); + + ret = devm_snd_soc_register_card(&pdev->dev, card); + if (ret == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (ret) { + dev_err(&pdev->dev, + "Soc register card failed %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, card); + + return ret; +} + +static const struct of_device_id rockchip_sound_of_match[] = { + { .compatible = "rockchip,rk3288-hdmi-analog", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, rockchip_sound_of_match); + +static struct platform_driver rockchip_sound_driver = { + .probe = snd_rk_mc_probe, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .pm = &snd_soc_pm_ops, + .of_match_table = rockchip_sound_of_match, + }, +}; + +module_platform_driver(rockchip_sound_driver); + +MODULE_AUTHOR("Sjoerd Simons sjoerd.simons@collabora.com"); +MODULE_DESCRIPTION("Rockchip RK3288 machine ASoC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRV_NAME);

This commit adds the DT definition of the es8388 i2c device found at address 0x10. It also adds the definition for connecting the Rockchip I2S to the es8388 analog output.

This commit is based on the initial work that was done by Sjoerd Simons sjoerd.simons@collabora.com with some improvements.

Signed-off-by: Romain Perier romain.perier@collabora.com ---

Changes in v7: - Added a new label for vccio_codec - Use vccio_codec instead of vcca_codec - Splitted headphone pins into hp_det and phone_ctl Changes in v6: None Changes in v5: None Changes in v4: - Updated to the new DT binding - Added the property 'rockchip,routing' - Renamed the node sound_es8388 to sound_i2s Changes in v3: None Changes in v2: None

arch/arm/boot/dts/rk3288-rock2-som.dtsi | 2 +- arch/arm/boot/dts/rk3288-rock2-square.dts | 42 +++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index b25ba80..c4d320c 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -136,7 +136,7 @@ regulator-always-on; };

- vcc_io: REG2 { + vcc_io: vccio_codec: REG2 { regulator-name = "VCC_IO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index dd3ad2e..f693c39 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -86,6 +86,19 @@ #sound-dai-cells = <0>; };

+ sound_i2s { + compatible = "rockchip,rk3288-hdmi-analog"; + rockchip,model = "I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&es8388>; + rockchip,routing = "Analog", "LOUT2", + "Analog", "ROUT2"; + rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; + rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&phone_ctl>, <&hp_det>; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&hym8563>; @@ -173,10 +186,29 @@ }; };

+&i2c2 { + status = "okay"; + + es8388: es8388@10 { + compatible = "everest,es8388", "everest,es8328"; + reg = <0x10>; + AVDD-supply = <&vccio_codec>; + DVDD-supply = <&vccio_codec>; + HPVDD-supply = <&vccio_codec>; + PVDD-supply = <&vccio_codec>; + clocks = <&cru SCLK_I2S0_OUT>; + clock-names = "i2s_clk_out"; + }; +}; + &i2c5 { status = "okay"; };

+&i2s { + status = "okay"; +}; + &pinctrl { ir { ir_int: ir-int { @@ -190,6 +222,16 @@ }; };

+ headphone { + hp_det: hp-det { + rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + phone_ctl: phone-ctl { + rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;