[alsa-devel] [PATCH 1/6] ASoC: rt5645: remove RT5645_I2S_BCLK_MS1 control
RT5645_I2S_BCLK_MS1 (reg 0x73 [5]) is reserverd in rt5645 and rt5650. This function is move to TDM control. We can configure it by snd_soc_dai_set_tdm_slot's slot_width parameter.
Signed-off-by: Bard Liao bardliao@realtek.com --- sound/soc/codecs/rt5645.c | 5 ++--- sound/soc/codecs/rt5645.h | 4 ---- 2 files changed, 2 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 8bad9fe..33ebe88 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -2104,9 +2104,8 @@ static int rt5645_hw_params(struct snd_pcm_substream *substream,
switch (dai->id) { case RT5645_AIF1: - mask_clk = RT5645_I2S_BCLK_MS1_MASK | RT5645_I2S_PD1_MASK; - val_clk = bclk_ms << RT5645_I2S_BCLK_MS1_SFT | - pre_div << RT5645_I2S_PD1_SFT; + mask_clk = RT5645_I2S_PD1_MASK; + val_clk = pre_div << RT5645_I2S_PD1_SFT; snd_soc_update_bits(codec, RT5645_I2S1_SDP, (0x3 << dl_sft), (val_len << dl_sft)); snd_soc_update_bits(codec, RT5645_ADDA_CLK1, mask_clk, val_clk); diff --git a/sound/soc/codecs/rt5645.h b/sound/soc/codecs/rt5645.h index 4473636..fa5c560 100644 --- a/sound/soc/codecs/rt5645.h +++ b/sound/soc/codecs/rt5645.h @@ -942,10 +942,6 @@ #define RT5645_I2S2_SDI_I2S2 (0x1 << 6)
/* ADC/DAC Clock Control 1 (0x73) */ -#define RT5645_I2S_BCLK_MS1_MASK (0x1 << 15) -#define RT5645_I2S_BCLK_MS1_SFT 15 -#define RT5645_I2S_BCLK_MS1_32 (0x0 << 15) -#define RT5645_I2S_BCLK_MS1_64 (0x1 << 15) #define RT5645_I2S_PD1_MASK (0x7 << 12) #define RT5645_I2S_PD1_SFT 12 #define RT5645_I2S_PD1_1 (0x0 << 12)
Fix PLL source register definitions.
Signed-off-by: Bard Liao bardliao@realtek.com --- sound/soc/codecs/rt5645.h | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/rt5645.h b/sound/soc/codecs/rt5645.h index fa5c560..1897889 100644 --- a/sound/soc/codecs/rt5645.h +++ b/sound/soc/codecs/rt5645.h @@ -1063,13 +1063,14 @@ #define RT5645_SCLK_SRC_SFT 14 #define RT5645_SCLK_SRC_MCLK (0x0 << 14) #define RT5645_SCLK_SRC_PLL1 (0x1 << 14) -#define RT5645_SCLK_SRC_RCCLK (0x2 << 14) /* 15MHz */ -#define RT5645_PLL1_SRC_MASK (0x3 << 12) -#define RT5645_PLL1_SRC_SFT 12 -#define RT5645_PLL1_SRC_MCLK (0x0 << 12) -#define RT5645_PLL1_SRC_BCLK1 (0x1 << 12) -#define RT5645_PLL1_SRC_BCLK2 (0x2 << 12) -#define RT5645_PLL1_SRC_BCLK3 (0x3 << 12) +#define RT5645_SCLK_SRC_RCCLK (0x2 << 14) +#define RT5645_PLL1_SRC_MASK (0x7 << 11) +#define RT5645_PLL1_SRC_SFT 11 +#define RT5645_PLL1_SRC_MCLK (0x0 << 11) +#define RT5645_PLL1_SRC_BCLK1 (0x1 << 11) +#define RT5645_PLL1_SRC_BCLK2 (0x2 << 11) +#define RT5645_PLL1_SRC_BCLK3 (0x3 << 11) +#define RT5645_PLL1_SRC_RCCLK (0x4 << 11) #define RT5645_PLL1_PD_MASK (0x1 << 3) #define RT5645_PLL1_PD_SFT 3 #define RT5645_PLL1_PD_1 (0x0 << 3)
This patch adds TDM slot control into dapm route. The control bits are different between rt5645 and rt5650, so we have separate dapm routes for each codec.
Signed-off-by: Oder Chiou oder_chiou@realtek.com Signed-off-by: Bard Liao bardliao@realtek.com --- sound/soc/codecs/rt5645.c | 355 ++++++++++++++++++++++++++++++++++++++-------- sound/soc/codecs/rt5645.h | 1 + 2 files changed, 299 insertions(+), 57 deletions(-)
diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 33ebe88..2ba761b 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -434,30 +434,6 @@ static unsigned int bst_tlv[] = { 8, 8, TLV_DB_SCALE_ITEM(5200, 0, 0), };
-static const char * const rt5645_tdm_data_swap_select[] = { - "L/R", "R/L", "L/L", "R/R" -}; - -static SOC_ENUM_SINGLE_DECL(rt5645_tdm_adc_slot0_1_enum, - RT5645_TDM_CTRL_1, 6, rt5645_tdm_data_swap_select); - -static SOC_ENUM_SINGLE_DECL(rt5645_tdm_adc_slot2_3_enum, - RT5645_TDM_CTRL_1, 4, rt5645_tdm_data_swap_select); - -static SOC_ENUM_SINGLE_DECL(rt5645_tdm_adc_slot4_5_enum, - RT5645_TDM_CTRL_1, 2, rt5645_tdm_data_swap_select); - -static SOC_ENUM_SINGLE_DECL(rt5645_tdm_adc_slot6_7_enum, - RT5645_TDM_CTRL_1, 0, rt5645_tdm_data_swap_select); - -static const char * const rt5645_tdm_adc_data_select[] = { - "1/2/R", "2/1/R", "R/1/2", "R/2/1" -}; - -static SOC_ENUM_SINGLE_DECL(rt5645_tdm_adc_sel_enum, - RT5645_TDM_CTRL_1, 8, - rt5645_tdm_adc_data_select); - static const struct snd_kcontrol_new rt5645_snd_controls[] = { /* Speaker Output Volume */ SOC_DOUBLE("Speaker Channel Switch", RT5645_SPK_VOL, @@ -518,17 +494,6 @@ static const struct snd_kcontrol_new rt5645_snd_controls[] = { /* I2S2 function select */ SOC_SINGLE("I2S2 Func Switch", RT5645_GPIO_CTRL1, RT5645_I2S2_SEL_SFT, 1, 1), - - /* TDM */ - SOC_ENUM("TDM Adc Slot0 1 Data", rt5645_tdm_adc_slot0_1_enum), - SOC_ENUM("TDM Adc Slot2 3 Data", rt5645_tdm_adc_slot2_3_enum), - SOC_ENUM("TDM Adc Slot4 5 Data", rt5645_tdm_adc_slot4_5_enum), - SOC_ENUM("TDM Adc Slot6 7 Data", rt5645_tdm_adc_slot6_7_enum), - SOC_ENUM("TDM IF1 ADC DATA Sel", rt5645_tdm_adc_sel_enum), - SOC_SINGLE("TDM IF1_DAC1_L Sel", RT5645_TDM_CTRL_3, 12, 7, 0), - SOC_SINGLE("TDM IF1_DAC1_R Sel", RT5645_TDM_CTRL_3, 8, 7, 0), - SOC_SINGLE("TDM IF1_DAC2_L Sel", RT5645_TDM_CTRL_3, 4, 7, 0), - SOC_SINGLE("TDM IF1_DAC2_R Sel", RT5645_TDM_CTRL_3, 0, 7, 0), };
/** @@ -1095,7 +1060,8 @@ static const struct snd_kcontrol_new rt5645_mono_adc_r2_mux =
/* MX-77 [9:8] */ static const char * const rt5645_if1_adc_in_src[] = { - "IF_ADC1", "IF_ADC2", "VAD_ADC" + "IF_ADC1/IF_ADC2/VAD_ADC", "IF_ADC2/IF_ADC1/VAD_ADC", + "VAD_ADC/IF_ADC1/IF_ADC2", "VAD_ADC/IF_ADC2/IF_ADC1" };
static SOC_ENUM_SINGLE_DECL( @@ -1105,6 +1071,140 @@ static SOC_ENUM_SINGLE_DECL( static const struct snd_kcontrol_new rt5645_if1_adc_in_mux = SOC_DAPM_ENUM("IF1 ADC IN source", rt5645_if1_adc_in_enum);
+/* MX-78 [4:0] */ +static const char * const rt5650_if1_adc_in_src[] = { + "IF_ADC1/IF_ADC2/DAC_REF/Null", + "IF_ADC1/IF_ADC2/Null/DAC_REF", + "IF_ADC1/DAC_REF/IF_ADC2/Null", + "IF_ADC1/DAC_REF/Null/IF_ADC2", + "IF_ADC1/Null/DAC_REF/IF_ADC2", + "IF_ADC1/Null/IF_ADC2/DAC_REF", + + "IF_ADC2/IF_ADC1/DAC_REF/Null", + "IF_ADC2/IF_ADC1/Null/DAC_REF", + "IF_ADC2/DAC_REF/IF_ADC1/Null", + "IF_ADC2/DAC_REF/Null/IF_ADC1", + "IF_ADC2/Null/DAC_REF/IF_ADC1", + "IF_ADC2/Null/IF_ADC1/DAC_REF", + + "DAC_REF/IF_ADC1/IF_ADC2/Null", + "DAC_REF/IF_ADC1/Null/IF_ADC2", + "DAC_REF/IF_ADC2/IF_ADC1/Null", + "DAC_REF/IF_ADC2/Null/IF_ADC1", + "DAC_REF/Null/IF_ADC1/IF_ADC2", + "DAC_REF/Null/IF_ADC2/IF_ADC1", + + "Null/IF_ADC1/IF_ADC2/DAC_REF", + "Null/IF_ADC1/DAC_REF/IF_ADC2", + "Null/IF_ADC2/IF_ADC1/DAC_REF", + "Null/IF_ADC2/DAC_REF/IF_ADC1", + "Null/DAC_REF/IF_ADC1/IF_ADC2", + "Null/DAC_REF/IF_ADC2/IF_ADC1", +}; + +static SOC_ENUM_SINGLE_DECL( + rt5650_if1_adc_in_enum, RT5645_TDM_CTRL_2, + 0, rt5650_if1_adc_in_src); + +static const struct snd_kcontrol_new rt5650_if1_adc_in_mux = + SOC_DAPM_ENUM("IF1 ADC IN source", rt5650_if1_adc_in_enum); + +/* MX-78 [15:14][13:12][11:10] */ +static const char * const rt5645_tdm_adc_swap_select[] = { + "L/R", "R/L", "L/L", "R/R" +}; + +static SOC_ENUM_SINGLE_DECL(rt5650_tdm_adc_slot0_1_enum, + RT5645_TDM_CTRL_2, 14, rt5645_tdm_adc_swap_select); + +static const struct snd_kcontrol_new rt5650_if1_adc1_in_mux = + SOC_DAPM_ENUM("IF1 ADC1 IN source", rt5650_tdm_adc_slot0_1_enum); + +static SOC_ENUM_SINGLE_DECL(rt5650_tdm_adc_slot2_3_enum, + RT5645_TDM_CTRL_2, 12, rt5645_tdm_adc_swap_select); + +static const struct snd_kcontrol_new rt5650_if1_adc2_in_mux = + SOC_DAPM_ENUM("IF1 ADC2 IN source", rt5650_tdm_adc_slot2_3_enum); + +static SOC_ENUM_SINGLE_DECL(rt5650_tdm_adc_slot4_5_enum, + RT5645_TDM_CTRL_2, 10, rt5645_tdm_adc_swap_select); + +static const struct snd_kcontrol_new rt5650_if1_adc3_in_mux = + SOC_DAPM_ENUM("IF1 ADC3 IN source", rt5650_tdm_adc_slot4_5_enum); + +/* MX-77 [7:6][5:4][3:2] */ +static SOC_ENUM_SINGLE_DECL(rt5645_tdm_adc_slot0_1_enum, + RT5645_TDM_CTRL_1, 6, rt5645_tdm_adc_swap_select); + +static const struct snd_kcontrol_new rt5645_if1_adc1_in_mux = + SOC_DAPM_ENUM("IF1 ADC1 IN source", rt5645_tdm_adc_slot0_1_enum); + +static SOC_ENUM_SINGLE_DECL(rt5645_tdm_adc_slot2_3_enum, + RT5645_TDM_CTRL_1, 4, rt5645_tdm_adc_swap_select); + +static const struct snd_kcontrol_new rt5645_if1_adc2_in_mux = + SOC_DAPM_ENUM("IF1 ADC2 IN source", rt5645_tdm_adc_slot2_3_enum); + +static SOC_ENUM_SINGLE_DECL(rt5645_tdm_adc_slot4_5_enum, + RT5645_TDM_CTRL_1, 2, rt5645_tdm_adc_swap_select); + +static const struct snd_kcontrol_new rt5645_if1_adc3_in_mux = + SOC_DAPM_ENUM("IF1 ADC3 IN source", rt5645_tdm_adc_slot4_5_enum); + +/* MX-79 [14:12][10:8][6:4][2:0] */ +static const char * const rt5645_tdm_dac_swap_select[] = { + "Slot0", "Slot1", "Slot2", "Slot3" +}; + +static SOC_ENUM_SINGLE_DECL(rt5645_tdm_dac0_enum, + RT5645_TDM_CTRL_3, 12, rt5645_tdm_dac_swap_select); + +static const struct snd_kcontrol_new rt5645_if1_dac0_tdm_sel_mux = + SOC_DAPM_ENUM("IF1 DAC0 source", rt5645_tdm_dac0_enum); + +static SOC_ENUM_SINGLE_DECL(rt5645_tdm_dac1_enum, + RT5645_TDM_CTRL_3, 8, rt5645_tdm_dac_swap_select); + +static const struct snd_kcontrol_new rt5645_if1_dac1_tdm_sel_mux = + SOC_DAPM_ENUM("IF1 DAC1 source", rt5645_tdm_dac1_enum); + +static SOC_ENUM_SINGLE_DECL(rt5645_tdm_dac2_enum, + RT5645_TDM_CTRL_3, 4, rt5645_tdm_dac_swap_select); + +static const struct snd_kcontrol_new rt5645_if1_dac2_tdm_sel_mux = + SOC_DAPM_ENUM("IF1 DAC2 source", rt5645_tdm_dac2_enum); + +static SOC_ENUM_SINGLE_DECL(rt5645_tdm_dac3_enum, + RT5645_TDM_CTRL_3, 0, rt5645_tdm_dac_swap_select); + +static const struct snd_kcontrol_new rt5645_if1_dac3_tdm_sel_mux = + SOC_DAPM_ENUM("IF1 DAC3 source", rt5645_tdm_dac3_enum); + +/* MX-7a [14:12][10:8][6:4][2:0] */ +static SOC_ENUM_SINGLE_DECL(rt5650_tdm_dac0_enum, + RT5650_TDM_CTRL_4, 12, rt5645_tdm_dac_swap_select); + +static const struct snd_kcontrol_new rt5650_if1_dac0_tdm_sel_mux = + SOC_DAPM_ENUM("IF1 DAC0 source", rt5650_tdm_dac0_enum); + +static SOC_ENUM_SINGLE_DECL(rt5650_tdm_dac1_enum, + RT5650_TDM_CTRL_4, 8, rt5645_tdm_dac_swap_select); + +static const struct snd_kcontrol_new rt5650_if1_dac1_tdm_sel_mux = + SOC_DAPM_ENUM("IF1 DAC1 source", rt5650_tdm_dac1_enum); + +static SOC_ENUM_SINGLE_DECL(rt5650_tdm_dac2_enum, + RT5650_TDM_CTRL_4, 4, rt5645_tdm_dac_swap_select); + +static const struct snd_kcontrol_new rt5650_if1_dac2_tdm_sel_mux = + SOC_DAPM_ENUM("IF1 DAC2 source", rt5650_tdm_dac2_enum); + +static SOC_ENUM_SINGLE_DECL(rt5650_tdm_dac3_enum, + RT5650_TDM_CTRL_4, 0, rt5645_tdm_dac_swap_select); + +static const struct snd_kcontrol_new rt5650_if1_dac3_tdm_sel_mux = + SOC_DAPM_ENUM("IF1 DAC3 source", rt5650_tdm_dac3_enum); + /* MX-2d [3] [2] */ static const char * const rt5650_a_dac1_src[] = { "DAC1", "Stereo DAC Mixer" @@ -1573,8 +1673,24 @@ static const struct snd_soc_dapm_widget rt5645_dapm_widgets[] = { SND_SOC_DAPM_PGA("IF1_ADC4", SND_SOC_NOPM, 0, 0, NULL, 0),
/* IF1 2 Mux */ - SND_SOC_DAPM_MUX("IF1 ADC Mux", SND_SOC_NOPM, + SND_SOC_DAPM_MUX("RT5645 IF1 ADC1 Swap Mux", SND_SOC_NOPM, + 0, 0, &rt5645_if1_adc1_in_mux), + SND_SOC_DAPM_MUX("RT5645 IF1 ADC2 Swap Mux", SND_SOC_NOPM, + 0, 0, &rt5645_if1_adc2_in_mux), + SND_SOC_DAPM_MUX("RT5645 IF1 ADC3 Swap Mux", SND_SOC_NOPM, + 0, 0, &rt5645_if1_adc3_in_mux), + SND_SOC_DAPM_MUX("RT5645 IF1 ADC Mux", SND_SOC_NOPM, 0, 0, &rt5645_if1_adc_in_mux), + + SND_SOC_DAPM_MUX("RT5650 IF1 ADC1 Swap Mux", SND_SOC_NOPM, + 0, 0, &rt5650_if1_adc1_in_mux), + SND_SOC_DAPM_MUX("RT5650 IF1 ADC2 Swap Mux", SND_SOC_NOPM, + 0, 0, &rt5650_if1_adc2_in_mux), + SND_SOC_DAPM_MUX("RT5650 IF1 ADC3 Swap Mux", SND_SOC_NOPM, + 0, 0, &rt5650_if1_adc3_in_mux), + SND_SOC_DAPM_MUX("RT5650 IF1 ADC Mux", SND_SOC_NOPM, + 0, 0, &rt5650_if1_adc_in_mux), + SND_SOC_DAPM_MUX("IF2 ADC Mux", SND_SOC_NOPM, 0, 0, &rt5645_if2_adc_in_mux),
@@ -1583,10 +1699,22 @@ static const struct snd_soc_dapm_widget rt5645_dapm_widgets[] = { RT5645_PWR_I2S1_BIT, 0, NULL, 0), SND_SOC_DAPM_PGA("IF1 DAC1", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_PGA("IF1 DAC2", SND_SOC_NOPM, 0, 0, NULL, 0), - SND_SOC_DAPM_PGA("IF1 DAC1 L", SND_SOC_NOPM, 0, 0, NULL, 0), - SND_SOC_DAPM_PGA("IF1 DAC1 R", SND_SOC_NOPM, 0, 0, NULL, 0), - SND_SOC_DAPM_PGA("IF1 DAC2 L", SND_SOC_NOPM, 0, 0, NULL, 0), - SND_SOC_DAPM_PGA("IF1 DAC2 R", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_MUX("RT5645 IF1 DAC1 L Mux", SND_SOC_NOPM, 0, 0, + &rt5645_if1_dac0_tdm_sel_mux), + SND_SOC_DAPM_MUX("RT5645 IF1 DAC1 R Mux", SND_SOC_NOPM, 0, 0, + &rt5645_if1_dac1_tdm_sel_mux), + SND_SOC_DAPM_MUX("RT5645 IF1 DAC2 L Mux", SND_SOC_NOPM, 0, 0, + &rt5645_if1_dac2_tdm_sel_mux), + SND_SOC_DAPM_MUX("RT5645 IF1 DAC2 R Mux", SND_SOC_NOPM, 0, 0, + &rt5645_if1_dac3_tdm_sel_mux), + SND_SOC_DAPM_MUX("RT5650 IF1 DAC1 L Mux", SND_SOC_NOPM, 0, 0, + &rt5650_if1_dac0_tdm_sel_mux), + SND_SOC_DAPM_MUX("RT5650 IF1 DAC1 R Mux", SND_SOC_NOPM, 0, 0, + &rt5650_if1_dac1_tdm_sel_mux), + SND_SOC_DAPM_MUX("RT5650 IF1 DAC2 L Mux", SND_SOC_NOPM, 0, 0, + &rt5650_if1_dac2_tdm_sel_mux), + SND_SOC_DAPM_MUX("RT5650 IF1 DAC2 R Mux", SND_SOC_NOPM, 0, 0, + &rt5650_if1_dac3_tdm_sel_mux), SND_SOC_DAPM_PGA("IF1 ADC", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_PGA("IF1 ADC L", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_PGA("IF1 ADC R", SND_SOC_NOPM, 0, 0, NULL, 0), @@ -1850,42 +1978,32 @@ static const struct snd_soc_dapm_route rt5645_dapm_routes[] = { { "IF_ADC2", NULL, "Mono ADC MIXR" }, { "VAD_ADC", NULL, "VAD ADC Mux" },
- { "IF1 ADC Mux", "IF_ADC1", "IF_ADC1" }, - { "IF1 ADC Mux", "IF_ADC2", "IF_ADC2" }, - { "IF1 ADC Mux", "VAD_ADC", "VAD_ADC" }, - { "IF2 ADC Mux", "IF_ADC1", "IF_ADC1" }, { "IF2 ADC Mux", "IF_ADC2", "IF_ADC2" }, { "IF2 ADC Mux", "VAD_ADC", "VAD_ADC" },
{ "IF1 ADC", NULL, "I2S1" }, - { "IF1 ADC", NULL, "IF1 ADC Mux" }, { "IF2 ADC", NULL, "I2S2" }, { "IF2 ADC", NULL, "IF2 ADC Mux" },
- { "AIF1TX", NULL, "IF1 ADC" }, - { "AIF1TX", NULL, "IF2 ADC" }, { "AIF2TX", NULL, "IF2 ADC" },
+ { "IF1 DAC0", NULL, "AIF1RX" }, { "IF1 DAC1", NULL, "AIF1RX" }, { "IF1 DAC2", NULL, "AIF1RX" }, + { "IF1 DAC3", NULL, "AIF1RX" }, { "IF2 DAC", NULL, "AIF2RX" },
+ { "IF1 DAC0", NULL, "I2S1" }, { "IF1 DAC1", NULL, "I2S1" }, { "IF1 DAC2", NULL, "I2S1" }, + { "IF1 DAC3", NULL, "I2S1" }, { "IF2 DAC", NULL, "I2S2" },
- { "IF1 DAC2 L", NULL, "IF1 DAC2" }, - { "IF1 DAC2 R", NULL, "IF1 DAC2" }, - { "IF1 DAC1 L", NULL, "IF1 DAC1" }, - { "IF1 DAC1 R", NULL, "IF1 DAC1" }, { "IF2 DAC L", NULL, "IF2 DAC" }, { "IF2 DAC R", NULL, "IF2 DAC" },
- { "DAC1 L Mux", "IF1 DAC", "IF1 DAC1 L" }, { "DAC1 L Mux", "IF2 DAC", "IF2 DAC L" }, - - { "DAC1 R Mux", "IF1 DAC", "IF1 DAC1 R" }, { "DAC1 R Mux", "IF2 DAC", "IF2 DAC R" },
{ "DAC1 MIXL", "Stereo ADC Switch", "Stereo1 ADC MIXL" }, @@ -1895,14 +2013,12 @@ static const struct snd_soc_dapm_route rt5645_dapm_routes[] = { { "DAC1 MIXR", "DAC1 Switch", "DAC1 R Mux" }, { "DAC1 MIXR", NULL, "dac stereo1 filter" },
- { "DAC L2 Mux", "IF1 DAC", "IF1 DAC2 L" }, { "DAC L2 Mux", "IF2 DAC", "IF2 DAC L" }, { "DAC L2 Mux", "Mono ADC", "Mono ADC MIXL" }, { "DAC L2 Mux", "VAD_ADC", "VAD_ADC" }, { "DAC L2 Volume", NULL, "DAC L2 Mux" }, { "DAC L2 Volume", NULL, "dac mono left filter" },
- { "DAC R2 Mux", "IF1 DAC", "IF1 DAC2 R" }, { "DAC R2 Mux", "IF2 DAC", "IF2 DAC R" }, { "DAC R2 Mux", "Mono ADC", "Mono ADC MIXR" }, { "DAC R2 Mux", "Haptic", "Haptic Generator" }, @@ -2040,6 +2156,80 @@ static const struct snd_soc_dapm_route rt5650_specific_dapm_routes[] = { { "DAC R1", NULL, "A DAC1 R Mux" }, { "DAC L2", NULL, "A DAC2 L Mux" }, { "DAC R2", NULL, "A DAC2 R Mux" }, + + { "RT5650 IF1 ADC1 Swap Mux", "L/R", "IF_ADC1" }, + { "RT5650 IF1 ADC1 Swap Mux", "R/L", "IF_ADC1" }, + { "RT5650 IF1 ADC1 Swap Mux", "L/L", "IF_ADC1" }, + { "RT5650 IF1 ADC1 Swap Mux", "R/R", "IF_ADC1" }, + + { "RT5650 IF1 ADC2 Swap Mux", "L/R", "IF_ADC2" }, + { "RT5650 IF1 ADC2 Swap Mux", "R/L", "IF_ADC2" }, + { "RT5650 IF1 ADC2 Swap Mux", "L/L", "IF_ADC2" }, + { "RT5650 IF1 ADC2 Swap Mux", "R/R", "IF_ADC2" }, + + { "RT5650 IF1 ADC3 Swap Mux", "L/R", "VAD_ADC" }, + { "RT5650 IF1 ADC3 Swap Mux", "R/L", "VAD_ADC" }, + { "RT5650 IF1 ADC3 Swap Mux", "L/L", "VAD_ADC" }, + { "RT5650 IF1 ADC3 Swap Mux", "R/R", "VAD_ADC" }, + + { "IF1 ADC", NULL, "RT5650 IF1 ADC1 Swap Mux" }, + { "IF1 ADC", NULL, "RT5650 IF1 ADC2 Swap Mux" }, + { "IF1 ADC", NULL, "RT5650 IF1 ADC3 Swap Mux" }, + + { "RT5650 IF1 ADC Mux", "IF_ADC1/IF_ADC2/DAC_REF/Null", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "IF_ADC1/IF_ADC2/Null/DAC_REF", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "IF_ADC1/DAC_REF/IF_ADC2/Null", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "IF_ADC1/DAC_REF/Null/IF_ADC2", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "IF_ADC1/Null/DAC_REF/IF_ADC2", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "IF_ADC1/Null/IF_ADC2/DAC_REF", "IF1 ADC" }, + + { "RT5650 IF1 ADC Mux", "IF_ADC2/IF_ADC1/DAC_REF/Null", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "IF_ADC2/IF_ADC1/Null/DAC_REF", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "IF_ADC2/DAC_REF/IF_ADC1/Null", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "IF_ADC2/DAC_REF/Null/IF_ADC1", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "IF_ADC2/Null/DAC_REF/IF_ADC1", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "IF_ADC2/Null/IF_ADC1/DAC_REF", "IF1 ADC" }, + + { "RT5650 IF1 ADC Mux", "DAC_REF/IF_ADC1/IF_ADC2/Null", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "DAC_REF/IF_ADC1/Null/IF_ADC2", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "DAC_REF/IF_ADC2/IF_ADC1/Null", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "DAC_REF/IF_ADC2/Null/IF_ADC1", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "DAC_REF/Null/IF_ADC1/IF_ADC2", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "DAC_REF/Null/IF_ADC2/IF_ADC1", "IF1 ADC" }, + + { "RT5650 IF1 ADC Mux", "Null/IF_ADC1/IF_ADC2/DAC_REF", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "Null/IF_ADC1/DAC_REF/IF_ADC2", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "Null/IF_ADC2/IF_ADC1/DAC_REF", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "Null/IF_ADC2/DAC_REF/IF_ADC1", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "Null/DAC_REF/IF_ADC1/IF_ADC2", "IF1 ADC" }, + { "RT5650 IF1 ADC Mux", "Null/DAC_REF/IF_ADC2/IF_ADC1", "IF1 ADC" }, + { "AIF1TX", NULL, "RT5650 IF1 ADC Mux" }, + + { "RT5650 IF1 DAC1 L Mux", "Slot0", "IF1 DAC0" }, + { "RT5650 IF1 DAC1 L Mux", "Slot1", "IF1 DAC1" }, + { "RT5650 IF1 DAC1 L Mux", "Slot2", "IF1 DAC2" }, + { "RT5650 IF1 DAC1 L Mux", "Slot3", "IF1 DAC3" }, + + { "RT5650 IF1 DAC1 R Mux", "Slot0", "IF1 DAC0" }, + { "RT5650 IF1 DAC1 R Mux", "Slot1", "IF1 DAC1" }, + { "RT5650 IF1 DAC1 R Mux", "Slot2", "IF1 DAC2" }, + { "RT5650 IF1 DAC1 R Mux", "Slot3", "IF1 DAC3" }, + + { "RT5650 IF1 DAC2 L Mux", "Slot0", "IF1 DAC0" }, + { "RT5650 IF1 DAC2 L Mux", "Slot1", "IF1 DAC1" }, + { "RT5650 IF1 DAC2 L Mux", "Slot2", "IF1 DAC2" }, + { "RT5650 IF1 DAC2 L Mux", "Slot3", "IF1 DAC3" }, + + { "RT5650 IF1 DAC2 R Mux", "Slot0", "IF1 DAC0" }, + { "RT5650 IF1 DAC2 R Mux", "Slot1", "IF1 DAC1" }, + { "RT5650 IF1 DAC2 R Mux", "Slot2", "IF1 DAC2" }, + { "RT5650 IF1 DAC2 R Mux", "Slot3", "IF1 DAC3" }, + + { "DAC1 L Mux", "IF1 DAC", "RT5650 IF1 DAC1 L Mux" }, + { "DAC1 R Mux", "IF1 DAC", "RT5650 IF1 DAC1 R Mux" }, + + { "DAC L2 Mux", "IF1 DAC", "RT5650 IF1 DAC2 L Mux" }, + { "DAC R2 Mux", "IF1 DAC", "RT5650 IF1 DAC2 R Mux" }, };
static const struct snd_soc_dapm_route rt5645_specific_dapm_routes[] = { @@ -2047,6 +2237,57 @@ static const struct snd_soc_dapm_route rt5645_specific_dapm_routes[] = { { "DAC R1", NULL, "Stereo DAC MIXR" }, { "DAC L2", NULL, "Mono DAC MIXL" }, { "DAC R2", NULL, "Mono DAC MIXR" }, + + { "RT5645 IF1 ADC1 Swap Mux", "L/R", "IF_ADC1" }, + { "RT5645 IF1 ADC1 Swap Mux", "R/L", "IF_ADC1" }, + { "RT5645 IF1 ADC1 Swap Mux", "L/L", "IF_ADC1" }, + { "RT5645 IF1 ADC1 Swap Mux", "R/R", "IF_ADC1" }, + + { "RT5645 IF1 ADC2 Swap Mux", "L/R", "IF_ADC2" }, + { "RT5645 IF1 ADC2 Swap Mux", "R/L", "IF_ADC2" }, + { "RT5645 IF1 ADC2 Swap Mux", "L/L", "IF_ADC2" }, + { "RT5645 IF1 ADC2 Swap Mux", "R/R", "IF_ADC2" }, + + { "RT5645 IF1 ADC3 Swap Mux", "L/R", "VAD_ADC" }, + { "RT5645 IF1 ADC3 Swap Mux", "R/L", "VAD_ADC" }, + { "RT5645 IF1 ADC3 Swap Mux", "L/L", "VAD_ADC" }, + { "RT5645 IF1 ADC3 Swap Mux", "R/R", "VAD_ADC" }, + + { "IF1 ADC", NULL, "RT5645 IF1 ADC1 Swap Mux" }, + { "IF1 ADC", NULL, "RT5645 IF1 ADC2 Swap Mux" }, + { "IF1 ADC", NULL, "RT5645 IF1 ADC3 Swap Mux" }, + + { "RT5645 IF1 ADC Mux", "IF_ADC1/IF_ADC2/VAD_ADC", "IF1 ADC" }, + { "RT5645 IF1 ADC Mux", "IF_ADC2/IF_ADC1/VAD_ADC", "IF1 ADC" }, + { "RT5645 IF1 ADC Mux", "VAD_ADC/IF_ADC1/IF_ADC2", "IF1 ADC" }, + { "RT5645 IF1 ADC Mux", "VAD_ADC/IF_ADC2/IF_ADC1", "IF1 ADC" }, + { "AIF1TX", NULL, "RT5645 IF1 ADC Mux" }, + + { "RT5645 IF1 DAC1 L Mux", "Slot0", "IF1 DAC0" }, + { "RT5645 IF1 DAC1 L Mux", "Slot1", "IF1 DAC1" }, + { "RT5645 IF1 DAC1 L Mux", "Slot2", "IF1 DAC2" }, + { "RT5645 IF1 DAC1 L Mux", "Slot3", "IF1 DAC3" }, + + { "RT5645 IF1 DAC1 R Mux", "Slot0", "IF1 DAC0" }, + { "RT5645 IF1 DAC1 R Mux", "Slot1", "IF1 DAC1" }, + { "RT5645 IF1 DAC1 R Mux", "Slot2", "IF1 DAC2" }, + { "RT5645 IF1 DAC1 R Mux", "Slot3", "IF1 DAC3" }, + + { "RT5645 IF1 DAC2 L Mux", "Slot0", "IF1 DAC0" }, + { "RT5645 IF1 DAC2 L Mux", "Slot1", "IF1 DAC1" }, + { "RT5645 IF1 DAC2 L Mux", "Slot2", "IF1 DAC2" }, + { "RT5645 IF1 DAC2 L Mux", "Slot3", "IF1 DAC3" }, + + { "RT5645 IF1 DAC2 R Mux", "Slot0", "IF1 DAC0" }, + { "RT5645 IF1 DAC2 R Mux", "Slot1", "IF1 DAC1" }, + { "RT5645 IF1 DAC2 R Mux", "Slot2", "IF1 DAC2" }, + { "RT5645 IF1 DAC2 R Mux", "Slot3", "IF1 DAC3" }, + + { "DAC1 L Mux", "IF1 DAC", "RT5645 IF1 DAC1 L Mux" }, + { "DAC1 R Mux", "IF1 DAC", "RT5645 IF1 DAC1 R Mux" }, + + { "DAC L2 Mux", "IF1 DAC", "RT5645 IF1 DAC2 L Mux" }, + { "DAC R2 Mux", "IF1 DAC", "RT5645 IF1 DAC2 R Mux" }, };
static int rt5645_hw_params(struct snd_pcm_substream *substream, diff --git a/sound/soc/codecs/rt5645.h b/sound/soc/codecs/rt5645.h index 1897889..c204861 100644 --- a/sound/soc/codecs/rt5645.h +++ b/sound/soc/codecs/rt5645.h @@ -105,6 +105,7 @@ #define RT5645_TDM_CTRL_1 0x77 #define RT5645_TDM_CTRL_2 0x78 #define RT5645_TDM_CTRL_3 0x79 +#define RT5650_TDM_CTRL_4 0x7a
/* Function - Analog */ #define RT5645_GLB_CLK 0x80
Modify the RT5645 driver to parse platform data from device tree. Write a DT binding document to describe those properties.
Signed-off-by: Bard Liao bardliao@realtek.com --- Documentation/devicetree/bindings/sound/rt5645.txt | 69 ++++++++++++++++++++++ sound/soc/codecs/rt5645.c | 39 ++++++++++++ 2 files changed, 108 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rt5645.txt
diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt new file mode 100644 index 0000000..47ce7ca --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt5645.txt @@ -0,0 +1,69 @@ +RT5650/RT5645 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : One of "realtek,rt5645" or "realtek,rt5650". + +- reg : The I2C address of the device. + +- interrupts : The CODEC's interrupt output. + +Optional properties: + +- realtek,in2-differential + Boolean. Indicate MIC2 input are differential, rather than single-ended. + +- realtek,dmic-en : Boolean. Indicate DMIC is used. + +- realtek,dmic1-data-pin +- realtek,dmic2-data-pin + Indicate which pin is used for each DMIC. + +- realtek,hp-det-gpio : The GPIO that indicate a JD event is triggered. + +- realtek,gpio-hp_det-active_high + Boolean. Indicate if hp-det-gpio is active high or not. + +- realtek,en-jd-func + Boolean. Indicate if codec IRQ is used or not. It is usually used for JD + and/or headset button detection. + +-- realtek,jd-mode : The JD mode of rt5645/rt5650 + 0 : rt5645/rt5650 JD function is not used + 1 : Mode-0 (VDD=3.3V), two port jack detection + 2 : Mode-1 (VDD=3.3V), one port jack detection + 3 : Mode-2 (VDD=1.8V), one port jack detection + +Pins on the device (for linking into audio routes) for RT5645/RT5650: + + * DMIC L1 + * DMIC R1 + * DMIC L2 + * DMIC R2 + * IN1P + * IN1N + * IN2P + * IN2N + * Haptic Generator + * HPOL + * HPOR + * LOUTL + * LOUTR + * PDM1L + * PDM1R + * SPOL + * SPOR + +Example: + +codec: rt5650@1a { + compatible = "realtek,rt5650"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + realtek,dmic-en = "true"; + realtek,en-jd-func = "true"; + realtek,jd-mode = <3>; +}; diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 2ba761b..fa19ad4 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3133,6 +3133,41 @@ static struct dmi_system_id dmi_platform_intel_braswell[] __initdata = { { } };
+static int rt5645_parse_dt(struct rt5645_priv *rt5645, struct device_node *np) +{ + rt5645->pdata.in2_diff = of_property_read_bool(np, + "realtek,in2-differential"); + rt5645->pdata.dmic_en = of_property_read_bool(np, + "realtek,dmic-en"); + of_property_read_u32(np, + "realtek,dmic1-data-pin", &rt5645->pdata.dmic1_data_pin); + of_property_read_u32(np, + "realtek,dmic2-data-pin", &rt5645->pdata.dmic2_data_pin); + rt5645->pdata.hp_det_gpio = of_get_named_gpio(np, + "realtek,hp-det-gpio", 0); + rt5645->pdata.gpio_hp_det_active_high = of_property_read_bool(np, + "realtek,gpio-hp_det-active_high"); + rt5645->pdata.en_jd_func = of_property_read_bool(np, + "realtek,en-jd-func"); + of_property_read_u32(np, + "realtek,jd-mode", &rt5645->pdata.jd_mode); + /* + * HP_DET_GPIO is optional (it may be statically tied on the board). + * -ENOENT means that the property doesn't exist, i.e. there is no + * GPIO, so is not an error. Any other error code means the property + * exists, but could not be parsed. + */ + + if (!rt5645->pdata.hp_det_gpio) + rt5645->pdata.hp_det_gpio = -EINVAL; + + if (!gpio_is_valid(rt5645->pdata.hp_det_gpio) && + (rt5645->pdata.hp_det_gpio != -ENOENT)) + return rt5645->pdata.hp_det_gpio; + + return 0; +} + static int rt5645_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -3152,6 +3187,10 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
if (pdata) { rt5645->pdata = *pdata; + } else if (i2c->dev.of_node) { + ret = rt5645_parse_dt(rt5645, i2c->dev.of_node); + if (ret) + return ret; } else { if (dmi_check_system(dmi_platform_intel_braswell)) { rt5645->pdata = *rt5645_pdata;
On Thu, Apr 30, 2015 at 06:18:45PM +0800, Bard Liao wrote:
+- realtek,dmic-en : Boolean. Indicate DMIC is used.
Why is this in DT as opposed to being configured by the DAPM routing or something - what is the concrete effect of this? Also...
+- realtek,dmic1-data-pin +- realtek,dmic2-data-pin
- Indicate which pin is used for each DMIC.
...should it be combined with these (eg, if one of these properties is specified should that imply that DMIC is enabled)? We should also have something saying what the value for these properties is.
+- realtek,en-jd-func
- Boolean. Indicate if codec IRQ is used or not. It is usually used for JD
- and/or headset button detection.
I'm not sure I understand what this is for? I'd expect that the interrupt would be used if specified, though if a GPIO is specified I guess that'd override it.
-----Original Message----- From: Mark Brown [mailto:broonie@kernel.org] Sent: Saturday, May 02, 2015 12:33 AM To: Bard Liao Cc: lgirdwood@gmail.com; alsa-devel@alsa-project.org; lars@metafoo.de; Flove; Oder Chiou; John Lin; koro.chen@mediatek.com; yang.a.fang@intel.com; zhengxing@rock-chips.com Subject: Re: [PATCH 4/6] ASoC: rt5645: add device tree support
On Thu, Apr 30, 2015 at 06:18:45PM +0800, Bard Liao wrote:
+- realtek,dmic-en : Boolean. Indicate DMIC is used.
Why is this in DT as opposed to being configured by the DAPM routing or something - what is the concrete effect of this? Also...
It is for DMIC clock pin configuration. If dmic_en is true, we will set the gpio pin to be used as DMIC clock.
+- realtek,dmic1-data-pin +- realtek,dmic2-data-pin
- Indicate which pin is used for each DMIC.
...should it be combined with these (eg, if one of these properties is specified should that imply that DMIC is enabled)? We should also have something saying what the value for these properties is.
Yes, it can be combined with dmic_en. Also, I will add some descriptions for the values.
+- realtek,en-jd-func
- Boolean. Indicate if codec IRQ is used or not. It is usually used
+for JD
- and/or headset button detection.
I'm not sure I understand what this is for? I'd expect that the interrupt would be used if specified, though if a GPIO is specified I guess that'd override it.
It is for codec IRQ though it is called en-jd-func. rt5645 IRQ is not for JD only but also other functions (like button detection). Another thing is that a separate CPU pin is used for JD IRQ in some HW design. It means some HW design use their own JD function. That's what hp-det-gpio for.
------Please consider the environment before printing this e-mail.
On Mon, May 04, 2015 at 05:21:59AM +0000, Bard Liao wrote:
- Boolean. Indicate if codec IRQ is used or not. It is usually used
+for JD
- and/or headset button detection.
I'm not sure I understand what this is for? I'd expect that the interrupt would be used if specified, though if a GPIO is specified I guess that'd override it.
It is for codec IRQ though it is called en-jd-func. rt5645 IRQ is not for JD only but also other functions (like button detection). Another thing is that a separate CPU pin is used for JD IRQ in some HW design. It means some HW design use their own JD function. That's what hp-det-gpio for.
I'm still not clear here - why is there a need for a separate flag over just specifying the additional GPIO/interrupt to use for this function?
-----Original Message----- From: Mark Brown [mailto:broonie@kernel.org] Sent: Monday, May 04, 2015 7:59 PM To: Bard Liao Cc: lgirdwood@gmail.com; alsa-devel@alsa-project.org; lars@metafoo.de; Flove; Oder Chiou; John Lin; koro.chen@mediatek.com; yang.a.fang@intel.com; zhengxing@rock-chips.com Subject: Re: [PATCH 4/6] ASoC: rt5645: add device tree support
On Mon, May 04, 2015 at 05:21:59AM +0000, Bard Liao wrote:
- Boolean. Indicate if codec IRQ is used or not. It is usually
+used for JD
- and/or headset button detection.
I'm not sure I understand what this is for? I'd expect that the interrupt would be used if specified, though if a GPIO is specified I guess that'd override it.
It is for codec IRQ though it is called en-jd-func. rt5645 IRQ is not for JD only but also other functions (like button detection). Another thing is that a separate CPU pin is used for JD IRQ in some HW design. It means some HW design use their own JD function. That's what hp-det-gpio for.
I'm still not clear here - why is there a need for a separate flag over just specifying the additional GPIO/interrupt to use for this function?
Oh, we can assume codec IRQ is used if codec JD or button detection function is used. I will send a patch to remove dmic_en and en_jd_func in platform data and send the device tree support patch again.
Thanks.
------Please consider the environment before printing this e-mail.
rt5645->btn_jack is for jack button report. So the mask should be SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | SND_JACK_BTN_3.
Signed-off-by: Bard Liao bardliao@realtek.com --- sound/soc/codecs/rt5645.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index fa19ad4..f400cf9 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -2933,7 +2933,8 @@ static int rt5645_irq_detection(struct rt5645_priv *rt5645) snd_soc_jack_report(rt5645->mic_jack, report, SND_JACK_MICROPHONE); if (rt5645->en_button_func) snd_soc_jack_report(rt5645->btn_jack, - report, SND_JACK_MICROPHONE); + report, SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3);
return report; }
On Thu, Apr 30, 2015 at 06:18:46PM +0800, Bard Liao wrote:
rt5645->btn_jack is for jack button report. So the mask should be SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | SND_JACK_BTN_3.
It doesn't matter in this case but generally bug fixes should go at the start of the series, that way they don't end up depending on other things and it's easier to apply them and get them sent to stable if needed.
The volume blocks have an step of 0.375dB, but TLV uses 0.01dB for units. Only use the resolution supported, ignoring the LSB of the volume register. This results in half the steps and 0.75dB per step, but reports accurate levels through TLV.
Signed-off-by: Bard Liao bardliao@realtek.com --- I didn't change the header file. It is because we can keep the header file match to the datasheet. Also, user will know we skip the LSB of the volume register by reading the source code. --- sound/soc/codecs/rt5645.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index f400cf9..71716c0 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -417,9 +417,9 @@ static bool rt5645_readable_register(struct device *dev, unsigned int reg) }
static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0); -static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0); +static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -6525, 75, 0); static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0); -static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0); +static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -1725, 75, 0); static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0);
/* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */ @@ -459,9 +459,9 @@ static const struct snd_kcontrol_new rt5645_snd_controls[] = { SOC_DOUBLE("DAC2 Playback Switch", RT5645_DAC_CTRL, RT5645_M_DAC_L2_VOL_SFT, RT5645_M_DAC_R2_VOL_SFT, 1, 1), SOC_DOUBLE_TLV("DAC1 Playback Volume", RT5645_DAC1_DIG_VOL, - RT5645_L_VOL_SFT, RT5645_R_VOL_SFT, 175, 0, dac_vol_tlv), + RT5645_L_VOL_SFT + 1, RT5645_R_VOL_SFT + 1, 87, 0, dac_vol_tlv), SOC_DOUBLE_TLV("Mono DAC Playback Volume", RT5645_DAC2_DIG_VOL, - RT5645_L_VOL_SFT, RT5645_R_VOL_SFT, 175, 0, dac_vol_tlv), + RT5645_L_VOL_SFT + 1, RT5645_R_VOL_SFT + 1, 87, 0, dac_vol_tlv),
/* IN1/IN2 Control */ SOC_SINGLE_TLV("IN1 Boost", RT5645_IN1_CTRL1, @@ -477,11 +477,11 @@ static const struct snd_kcontrol_new rt5645_snd_controls[] = { SOC_DOUBLE("ADC Capture Switch", RT5645_STO1_ADC_DIG_VOL, RT5645_L_MUTE_SFT, RT5645_R_MUTE_SFT, 1, 1), SOC_DOUBLE_TLV("ADC Capture Volume", RT5645_STO1_ADC_DIG_VOL, - RT5645_L_VOL_SFT, RT5645_R_VOL_SFT, 127, 0, adc_vol_tlv), + RT5645_L_VOL_SFT + 1, RT5645_R_VOL_SFT + 1, 63, 0, adc_vol_tlv), SOC_DOUBLE("Mono ADC Capture Switch", RT5645_MONO_ADC_DIG_VOL, RT5645_L_MUTE_SFT, RT5645_R_MUTE_SFT, 1, 1), SOC_DOUBLE_TLV("Mono ADC Capture Volume", RT5645_MONO_ADC_DIG_VOL, - RT5645_L_VOL_SFT, RT5645_R_VOL_SFT, 127, 0, adc_vol_tlv), + RT5645_L_VOL_SFT + 1, RT5645_R_VOL_SFT + 1, 63, 0, adc_vol_tlv),
/* ADC Boost Volume Control */ SOC_DOUBLE_TLV("STO1 ADC Boost Gain", RT5645_ADC_BST_VOL1,
On Thu, Apr 30, 2015 at 06:18:42PM +0800, Bard Liao wrote:
RT5645_I2S_BCLK_MS1 (reg 0x73 [5]) is reserverd in rt5645 and rt5650. This function is move to TDM control. We can configure it by snd_soc_dai_set_tdm_slot's slot_width parameter.
Applied all except patch 4 (the DT one), thanks.
participants (2)
-
Bard Liao -
Mark Brown