When we want to support more sample rate, for example 12kHz/24kHz we need update the process_option table, if we want to support more sample rate next time, the table need to be updated again. which is not flexible.

We got a function fsl_asrc_sel_proc to replace the table, which can give the pre-processing and post-processing options according to the sample rate.

Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- sound/soc/fsl/fsl_asrc.c | 78 +++++++++++++++++++++++++++++++++++------------- 1 file changed, 58 insertions(+), 20 deletions(-)

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c index 0b937924d2e4..d34d539d01f2 100644 --- a/sound/soc/fsl/fsl_asrc.c +++ b/sound/soc/fsl/fsl_asrc.c @@ -26,24 +26,6 @@ #define pair_dbg(fmt, ...) \ dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)

-/* Sample rates are aligned with that defined in pcm.h file */ -static const u8 process_option[][12][2] = { - /* 8kHz 11.025kHz 16kHz 22.05kHz 32kHz 44.1kHz 48kHz 64kHz 88.2kHz 96kHz 176kHz 192kHz */ - {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 5512Hz */ - {{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 8kHz */ - {{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 11025Hz */ - {{1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 16kHz */ - {{1, 2}, {1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 22050Hz */ - {{1, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},}, /* 32kHz */ - {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 44.1kHz */ - {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 48kHz */ - {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},}, /* 64kHz */ - {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 88.2kHz */ - {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 96kHz */ - {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 176kHz */ - {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 192kHz */ -}; - /* Corresponding to process_option */ static int supported_input_rate[] = { 5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, @@ -80,6 +62,54 @@ static unsigned char *clk_map[2];

/** + * Select the pre-processing and post-processing options + * + * inrate: input sample rate + * outrate: output sample rate + * pre_proc: return value for pre-processing option + * post_proc: return value for post-processing option + */ +static int fsl_asrc_sel_proc(int inrate, int outrate, int *pre_proc, + int *post_proc) +{ + bool post_proc_cond2; + bool post_proc_cond0; + + /* Does not support cases: Tsout > 8.125 * Tsin */ + if (inrate * 8 > 65 * outrate) + return -EINVAL; + + /* Otherwise, select pre_proc between [0, 2] */ + if (inrate * 8 > 33 * outrate) + *pre_proc = 2; + else if (inrate * 8 > 15 * outrate) { + if (inrate > 152000) + *pre_proc = 2; + else + *pre_proc = 1; + } else if (inrate < 76000) + *pre_proc = 0; + else if (inrate > 152000) + *pre_proc = 2; + else + *pre_proc = 1; + + /* Condition for selection of post-processing */ + post_proc_cond2 = (inrate * 15 > outrate * 16 && outrate < 56000) || + (inrate > 56000 && outrate < 56000); + post_proc_cond0 = inrate * 23 < outrate * 8; + + if (post_proc_cond2) + *post_proc = 2; + else if (post_proc_cond0) + *post_proc = 0; + else + *post_proc = 1; + + return 0; +} + +/** * Request ASRC pair * * It assigns pair by the order of A->C->B because allocation of pair B, @@ -239,8 +269,10 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair) u32 inrate, outrate, indiv, outdiv; u32 clk_index[2], div[2]; int in, out, channels; + int pre_proc, post_proc; struct clk *clk; bool ideal; + int ret;

if (!config) { pair_err("invalid pair config\n"); @@ -289,6 +321,12 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair) return -EINVAL; }

+ ret = fsl_asrc_sel_proc(inrate, outrate, &pre_proc, &post_proc); + if (ret) { + pair_err("No supported pre-processing options\n"); + return ret; + } + /* Validate input and output clock sources */ clk_index[IN] = clk_map[IN][config->inclk]; clk_index[OUT] = clk_map[OUT][config->outclk]; @@ -380,8 +418,8 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair) /* Apply configurations for pre- and post-processing */ regmap_update_bits(asrc_priv->regmap, REG_ASRCFG, ASRCFG_PREMODi_MASK(index) | ASRCFG_POSTMODi_MASK(index), - ASRCFG_PREMOD(index, process_option[in][out][0]) | - ASRCFG_POSTMOD(index, process_option[in][out][1])); + ASRCFG_PREMOD(index, pre_proc) | + ASRCFG_POSTMOD(index, post_proc));

return fsl_asrc_set_ideal_ratio(pair, inrate, outrate); }

Unify the supported input and output rate, add the 12kHz/24kHz/128kHz to the support list

Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- sound/soc/fsl/fsl_asrc.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-)

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c index d34d539d01f2..b0d19b787bb8 100644 --- a/sound/soc/fsl/fsl_asrc.c +++ b/sound/soc/fsl/fsl_asrc.c @@ -27,13 +27,14 @@ dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)

/* Corresponding to process_option */ -static int supported_input_rate[] = { - 5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, - 96000, 176400, 192000, +static unsigned int supported_asrc_rate[] = { + 5512, 8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000, + 64000, 88200, 96000, 128000, 176400, 192000, };

-static int supported_asrc_rate[] = { - 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000, +static struct snd_pcm_hw_constraint_list fsl_asrc_rate_constraints = { + .count = ARRAY_SIZE(supported_asrc_rate), + .list = supported_asrc_rate, };

/** @@ -296,11 +297,11 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair) ideal = config->inclk == INCLK_NONE;

/* Validate input and output sample rates */ - for (in = 0; in < ARRAY_SIZE(supported_input_rate); in++) - if (inrate == supported_input_rate[in]) + for (in = 0; in < ARRAY_SIZE(supported_asrc_rate); in++) + if (inrate == supported_asrc_rate[in]) break;

- if (in == ARRAY_SIZE(supported_input_rate)) { + if (in == ARRAY_SIZE(supported_asrc_rate)) { pair_err("unsupported input sample rate: %dHz\n", inrate); return -EINVAL; } @@ -493,7 +494,9 @@ static int fsl_asrc_dai_startup(struct snd_pcm_substream *substream, snd_pcm_hw_constraint_step(substream->runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, 2);

- return 0; + + return snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, &fsl_asrc_rate_constraints); }

static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream, @@ -606,7 +609,6 @@ static int fsl_asrc_dai_probe(struct snd_soc_dai *dai) return 0; }

-#define FSL_ASRC_RATES SNDRV_PCM_RATE_8000_192000 #define FSL_ASRC_FORMATS (SNDRV_PCM_FMTBIT_S24_LE | \ SNDRV_PCM_FMTBIT_S16_LE | \ SNDRV_PCM_FMTBIT_S20_3LE) @@ -617,14 +619,18 @@ static int fsl_asrc_dai_probe(struct snd_soc_dai *dai) .stream_name = "ASRC-Playback", .channels_min = 1, .channels_max = 10, - .rates = FSL_ASRC_RATES, + .rate_min = 5512, + .rate_max = 192000, + .rates = SNDRV_PCM_RATE_KNOT, .formats = FSL_ASRC_FORMATS, }, .capture = { .stream_name = "ASRC-Capture", .channels_min = 1, .channels_max = 10, - .rates = FSL_ASRC_RATES, + .rate_min = 5512, + .rate_max = 192000, + .rates = SNDRV_PCM_RATE_KNOT, .formats = FSL_ASRC_FORMATS, }, .ops = &fsl_asrc_dai_ops,