I have the following sound devices:

hwinfo --sound Absolute path to 'hwinfo' is '/usr/sbin/hwinfo', so running it may require superuser privileges (eg. root). freek@eiktum:~> /usr/sbin/hwinfo --sound 16: PCI 14.2: 0403 Audio device [Created at pci.378] Unique ID: 5Dex.BDUuYMOWyw7 SysFS ID: /devices/pci0000:00/0000:00:14.2 SysFS BusID: 0000:00:14.2 Hardware Class: sound Model: "ATI SBx00 Azalia (Intel HDA)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4383 "SBx00 Azalia (Intel HDA)" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4383 Revision: 0x40 Memory Range: 0xfe6f8000-0xfe6fbfff (rw,non-prefetchable) IRQ: 10 (no events) Module Alias: "pci:v00001002d00004383sv00001002sd00004383bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=yes, avail=yes, need=no, active=unknown

26: PCI 500.1: 0403 Audio device [Created at pci.378] Unique ID: 5yAR.dhjYDcGDBr3 Parent ID: _Znp.ZJmKoWxd6BF SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:05:00.1 SysFS BusID: 0000:05:00.1 Hardware Class: sound Model: "ATI RV770 HDMI Audio [Radeon HD 4850/4870]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0xaa30 "RV770 HDMI Audio [Radeon HD 4850/4870]" SubVendor: pci 0x1787 "Hightech Information System Ltd." SubDevice: pci 0xaa30 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfe9ec000-0xfe9effff (rw,non-prefetchable) IRQ: 36 (1104 events) Module Alias: "pci:v00001002d0000AA30sv00001787sd0000AA30bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=yes, avail=yes, need=no, active=unknown Attached to: #18 (PCI bridge)

I have my monitor connected via HDMI and that monitor has speakers. The monitor is:

hwinfo --monitor 29: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR.ukgc1_4VzS0 Parent ID: Ddhb.zvQlrOmSRQ8 Hardware Class: monitor Model: "R231" Vendor: ACR Device: eisa 0x0504 "R231" Serial ID: "T6GEE0012400" Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@67Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1152x864@75Hz Resolution: 1280x1024@60Hz Resolution: 1280x720@60Hz Resolution: 1920x1080@60Hz Size: 509x286 mm Year of Manufacture: 2016 Week of Manufacture: 4 Detailed Timings #0: Resolution: 1920x1080 Horizontal: 1920 2008 2052 2200 (+88 +132 +280) +hsync Vertical: 1080 1084 1089 1125 (+4 +9 +45) +vsync Frequencies: 148.50 MHz, 67.50 kHz, 60.00 Hz Driver Info #0: Max. Resolution: 1920x1080 Vert. Sync Range: 56-75 Hz Hor. Sync Range: 31-75 kHz Bandwidth: 148 MHz Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #8 (VGA compatible controller)

The sound is working OK, however the problem is that the sound is delayed by about one second compared to the picture on the screen. Most visible/hearable by using Musescore, where a music note is highlighted when it is played. Using VGA and the other sound card there is no delay.

output of alsa-info.sh is attached.