[PATCH v2 0/7] qrb4210-rb2: add HDMI audio playback support
Rebased on top of -master, tested.
Changes since v1: -- removed handling of MI2S clock in sm2450_snd_shutdown(): setting clock rate and disabling it causes audio delay on playback start; -- removed empty sound { } node from sm6115.dtsi as suggested by Krzysztof; -- moved lpi_i2s2_active pins description to qrb423310 board-specific file as suggested by Dmitry Baryshkov; -- moved q6asmdai DAIs to apr soc node as suggested by Konrad Dybcio; -- lpass_tlmm is not disabled; -- lpass_tlmm node moved to sm4250.dtsi; -- kept MultiMedia DAIs as is, without them the sound card driver doesn't initialise; -- added some reviewed-by tags.
This series still keeps "qcom,qrb4210-rb2-sndcard" for sm8250 soundcard. As per off the list discussion with Srini it was suggested to have it since in future it may be required to add clocks, workarounds, quirks, model-specific things based on this compatible. The same as for RB5 compatible in sm8250 snd driver.
This focuses on HDMI audio playback only hence there are no soundwire and dmic pins, for instance. The work to enable playback via wcd+wsa8815 amplifier is in progress (it works) and one of the routes is to merge such two patchsets together.
Link to prev series: https://lore.kernel.org/linux-sound/20240628010715.438471-1-alexey.klimov@li...
Alexey Klimov (7): ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string ASoC: qcom: sm8250: add handling of secondary MI2S clock arm64: dts: qcom: sm6115: add apr and its services arm64: dts: qcom: sm4250: add LPASS LPI pin controller arm64: dts: qcom: qrb4210-rb2: add description of lpi_i2s2 pins arm64: dts: qcom: qrb4210-rb2: add HDMI audio playback support
.../bindings/sound/qcom,sm8250.yaml | 1 + arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 91 +++++++++++++++++++ arch/arm64/boot/dts/qcom/sm4250.dtsi | 16 ++++ arch/arm64/boot/dts/qcom/sm6115.dtsi | 72 +++++++++++++++ sound/soc/qcom/sm8250.c | 9 ++ 5 files changed, 189 insertions(+)
Add adsp-backed soundcard compatible for QRB4210 RB2 platform, which as of now looks fully compatible with SM8250.
Signed-off-by: Alexey Klimov alexey.klimov@linaro.org --- Documentation/devicetree/bindings/sound/qcom,sm8250.yaml | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index 1d3acdc0c733..2e2e01493a5f 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -30,6 +30,7 @@ properties: - qcom,apq8096-sndcard - qcom,qcm6490-idp-sndcard - qcom,qcs6490-rb3gen2-sndcard + - qcom,qrb4210-rb2-sndcard - qcom,qrb5165-rb5-sndcard - qcom,sc7180-qdsp6-sndcard - qcom,sc8280xp-sndcard
On Wed, Oct 02, 2024 at 03:20:09AM +0100, Alexey Klimov wrote:
Add adsp-backed soundcard compatible for QRB4210 RB2 platform, which as of now looks fully compatible with SM8250.
Signed-off-by: Alexey Klimov alexey.klimov@linaro.org
Documentation/devicetree/bindings/sound/qcom,sm8250.yaml | 1 + 1 file changed, 1 insertion(+)
Reviewed-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Best regards, Krzysztof
Add "qcom,qrb4210-rb2-sndcard" to the list of recognizable devices.
Signed-off-by: Alexey Klimov alexey.klimov@linaro.org --- sound/soc/qcom/sm8250.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/soc/qcom/sm8250.c b/sound/soc/qcom/sm8250.c index 274bab28209a..19adadedc88a 100644 --- a/sound/soc/qcom/sm8250.c +++ b/sound/soc/qcom/sm8250.c @@ -174,6 +174,7 @@ static int sm8250_platform_probe(struct platform_device *pdev)
static const struct of_device_id snd_sm8250_dt_match[] = { {.compatible = "qcom,sm8250-sndcard"}, + {.compatible = "qcom,qrb4210-rb2-sndcard"}, {.compatible = "qcom,qrb5165-rb5-sndcard"}, {} };
On Wed, Oct 02, 2024 at 03:20:10AM GMT, Alexey Klimov wrote:
Add "qcom,qrb4210-rb2-sndcard" to the list of recognizable devices.
Signed-off-by: Alexey Klimov alexey.klimov@linaro.org
sound/soc/qcom/sm8250.c | 1 + 1 file changed, 1 insertion(+)
Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org
Add handling of clock related to secondary MI2S_RX in sm8250_snd_startup().
Signed-off-by: Alexey Klimov alexey.klimov@linaro.org --- sound/soc/qcom/sm8250.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/sound/soc/qcom/sm8250.c b/sound/soc/qcom/sm8250.c index 19adadedc88a..8776c35a98df 100644 --- a/sound/soc/qcom/sm8250.c +++ b/sound/soc/qcom/sm8250.c @@ -63,6 +63,14 @@ static int sm8250_snd_startup(struct snd_pcm_substream *substream) snd_soc_dai_set_fmt(cpu_dai, fmt); snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt); break; + case SECONDARY_MI2S_RX: + codec_dai_fmt |= SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S; + snd_soc_dai_set_sysclk(cpu_dai, + Q6AFE_LPASS_CLK_ID_SEC_MI2S_IBIT, + MI2S_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK); + snd_soc_dai_set_fmt(cpu_dai, fmt); + snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt); + break; case TERTIARY_MI2S_RX: codec_dai_fmt |= SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S; snd_soc_dai_set_sysclk(cpu_dai,
On Wed, Oct 02, 2024 at 03:20:11AM GMT, Alexey Klimov wrote:
Add handling of clock related to secondary MI2S_RX in sm8250_snd_startup().
Signed-off-by: Alexey Klimov alexey.klimov@linaro.org
sound/soc/qcom/sm8250.c | 8 ++++++++ 1 file changed, 8 insertions(+)
Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org
Add apr (asynchronous packet router) node and its associated services required to enable audio on QRB4210 RB2 platform.
Reviewed-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Signed-off-by: Alexey Klimov alexey.klimov@linaro.org --- arch/arm64/boot/dts/qcom/sm6115.dtsi | 72 ++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 41216cc319d6..b211a49982d6 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -14,6 +14,8 @@ #include <dt-bindings/interconnect/qcom,sm6115.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,apr.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include <dt-bindings/thermal/thermal.h>
/ { @@ -2701,6 +2703,76 @@ glink-edge { qcom,remote-pid = <2>; mboxes = <&apcs_glb 8>;
+ apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1c1 0x0>; + + dai@0 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + + dai@1 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + + dai@2 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp";
Add the Low Power Audio SubSystem Low Power Island (LPASS LPI) pin controller device node required for audio subsystem on Qualcomm QRB4210 RB2.
Signed-off-by: Alexey Klimov alexey.klimov@linaro.org --- arch/arm64/boot/dts/qcom/sm4250.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm4250.dtsi b/arch/arm64/boot/dts/qcom/sm4250.dtsi index c5add8f44fc0..37c0e963e739 100644 --- a/arch/arm64/boot/dts/qcom/sm4250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm4250.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2021, Iskren Chernev iskren.chernev@gmail.com */
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> #include "sm6115.dtsi"
&CPU0 { @@ -36,3 +37,18 @@ &CPU6 { &CPU7 { compatible = "qcom,kryo240"; }; + +&soc { + lpass_tlmm: pinctrl@a7c0000 { + compatible = "qcom,sm4250-lpass-lpi-pinctrl"; + reg = <0x0 0xa7c0000 0x0 0x20000>, + <0x0 0xa950000 0x0 0x10000>; + + clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 26>; + }; +};
On Wed, Oct 02, 2024 at 03:20:13AM GMT, Alexey Klimov wrote:
Add the Low Power Audio SubSystem Low Power Island (LPASS LPI) pin controller device node required for audio subsystem on Qualcomm QRB4210 RB2.
Signed-off-by: Alexey Klimov alexey.klimov@linaro.org
arch/arm64/boot/dts/qcom/sm4250.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm4250.dtsi b/arch/arm64/boot/dts/qcom/sm4250.dtsi index c5add8f44fc0..37c0e963e739 100644 --- a/arch/arm64/boot/dts/qcom/sm4250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm4250.dtsi @@ -3,6 +3,7 @@
- Copyright (c) 2021, Iskren Chernev iskren.chernev@gmail.com
*/
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> #include "sm6115.dtsi"
&CPU0 { @@ -36,3 +37,18 @@ &CPU6 { &CPU7 { compatible = "qcom,kryo240"; };
+&soc {
- lpass_tlmm: pinctrl@a7c0000 {
Please add the node to sm6115.dtsi and override the compat string here.
compatible = "qcom,sm4250-lpass-lpi-pinctrl";reg = <0x0 0xa7c0000 0x0 0x20000>,<0x0 0xa950000 0x0 0x10000>;
Please pad address to 8 hex digits: reg = <0x0 0x0a7c0000 0x0 0x20000>
clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;clock-names = "audio";gpio-controller;#gpio-cells = <2>;gpio-ranges = <&lpass_tlmm 0 0 26>;- };
+};
2.45.2
This is required to enable to HDMI audio playback on QRB4210 RB2 board.
Signed-off-by: Alexey Klimov alexey.klimov@linaro.org --- arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 36 ++++++++++++++++++++++++ 1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index 1888d99d398b..7731681688d5 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -634,6 +634,42 @@ sdc2_card_det_n: sd-card-det-n-state { }; };
+&lpass_tlmm { + lpi_i2s2_active: lpi-i2s2-active-state { + sck-pin { + pins = "gpio10"; + function = "i2s2_clk"; + bias-disable; + drive-strength = <8>; + output-high; + }; + + ws-pins { + pins = "gpio11"; + function = "i2s2_ws"; + bias-disable; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio12"; + function = "i2s2_data"; + bias-disable; + drive-strength = <8>; + output-high; + }; + + ext-mclk1 { + pins = "gpio18"; + function = "ext_mclk1_a"; + bias-disable; + drive-strength = <16>; + output-high; + }; + }; +}; + &uart3 { interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
On 02/10/2024 04:20, Alexey Klimov wrote:
This is required to enable to HDMI audio playback on QRB4210 RB2 board.
Signed-off-by: Alexey Klimov alexey.klimov@linaro.org
arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 36 ++++++++++++++++++++++++ 1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index 1888d99d398b..7731681688d5 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -634,6 +634,42 @@ sdc2_card_det_n: sd-card-det-n-state { }; };
+&lpass_tlmm {
- lpi_i2s2_active: lpi-i2s2-active-state {
sck-pin {
It does not look like you tested the DTS against bindings. Please run `make dtbs_check W=1` (see Documentation/devicetree/bindings/writing-schema.rst or https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-source... for instructions).
Best regards, Krzysztof
Add sound node and dsp-related piece to enable HDMI audio playback support on Qualcomm QRB4210 RB2 board. That is the only sound output supported for now.
Signed-off-by: Alexey Klimov alexey.klimov@linaro.org --- arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 55 ++++++++++++++++++++++++ 1 file changed, 55 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index 7731681688d5..b8bc4452ca48 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -6,6 +6,8 @@ /dts-v1/;
#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include <dt-bindings/usb/pd.h> #include "sm4250.dtsi" #include "pm6125.dtsi" @@ -103,6 +105,51 @@ led-wlan { }; };
+ sound { + compatible = "qcom,qrb4210-rb2-sndcard"; + pinctrl-0 = <&lpi_i2s2_active>; + pinctrl-names = "default"; + model = "Qualcomm-RB2-WSA8815-Speakers-DMIC0"; + audio-routing = "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI Playback"; + cpu { + sound-dai = <&q6afedai SECONDARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <<9611_codec 0>; + }; + }; + }; + vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 { compatible = "regulator-fixed"; regulator-name = "VREG_HDMI_OUT_1P2"; @@ -318,6 +365,14 @@ &pon_resin { status = "okay"; };
+/* SECONDARY I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */ +&q6afedai { + dai@20 { + reg = <SECONDARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; +}; + &qupv3_id_0 { status = "okay"; };
On Wed, Oct 02, 2024 at 03:20:15AM GMT, Alexey Klimov wrote:
Add sound node and dsp-related piece to enable HDMI audio playback support on Qualcomm QRB4210 RB2 board. That is the only sound output supported for now.
Signed-off-by: Alexey Klimov alexey.klimov@linaro.org
arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 55 ++++++++++++++++++++++++ 1 file changed, 55 insertions(+)
[...]
@@ -318,6 +365,14 @@ &pon_resin { status = "okay"; };
+/* SECONDARY I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */
Nit: LT9611UXC
Nevertheless,
Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org
+&q6afedai {
- dai@20 {
reg = <SECONDARY_MI2S_RX>;qcom,sd-lines = <0>;- };
+};
&qupv3_id_0 { status = "okay"; }; -- 2.45.2
On Wed, 02 Oct 2024 03:20:08 +0100, Alexey Klimov wrote:
Rebased on top of -master, tested.
Changes since v1: -- removed handling of MI2S clock in sm2450_snd_shutdown(): setting clock rate and disabling it causes audio delay on playback start; -- removed empty sound { } node from sm6115.dtsi as suggested by Krzysztof; -- moved lpi_i2s2_active pins description to qrb423310 board-specific file as suggested by Dmitry Baryshkov; -- moved q6asmdai DAIs to apr soc node as suggested by Konrad Dybcio; -- lpass_tlmm is not disabled; -- lpass_tlmm node moved to sm4250.dtsi; -- kept MultiMedia DAIs as is, without them the sound card driver doesn't initialise; -- added some reviewed-by tags.
This series still keeps "qcom,qrb4210-rb2-sndcard" for sm8250 soundcard. As per off the list discussion with Srini it was suggested to have it since in future it may be required to add clocks, workarounds, quirks, model-specific things based on this compatible. The same as for RB5 compatible in sm8250 snd driver.
This focuses on HDMI audio playback only hence there are no soundwire and dmic pins, for instance. The work to enable playback via wcd+wsa8815 amplifier is in progress (it works) and one of the routes is to merge such two patchsets together.
Link to prev series: https://lore.kernel.org/linux-sound/20240628010715.438471-1-alexey.klimov@li...
Alexey Klimov (7): ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string ASoC: qcom: sm8250: add handling of secondary MI2S clock arm64: dts: qcom: sm6115: add apr and its services arm64: dts: qcom: sm4250: add LPASS LPI pin controller arm64: dts: qcom: qrb4210-rb2: add description of lpi_i2s2 pins arm64: dts: qcom: qrb4210-rb2: add HDMI audio playback support
.../bindings/sound/qcom,sm8250.yaml | 1 + arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 91 +++++++++++++++++++ arch/arm64/boot/dts/qcom/sm4250.dtsi | 16 ++++ arch/arm64/boot/dts/qcom/sm6115.dtsi | 72 +++++++++++++++ sound/soc/qcom/sm8250.c | 9 ++ 5 files changed, 189 insertions(+)
-- 2.45.2
My bot found new DTB warnings on the .dts files added or changed in this series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y qcom/qrb4210-rb2.dtb' for 20241002022015.867031-1-alexey.klimov@linaro.org:
arch/arm64/boot/dts/qcom/qrb4210-rb2.dtb: pinctrl@a7c0000: lpi-i2s2-active-state: 'oneOf' conditional failed, one must be fixed: 'pins' is a required property 'function' is a required property Unevaluated properties are not allowed ('data-pins', 'ext-mclk1', 'sck-pin', 'ws-pins' were unexpected) 'ext-mclk1', 'sck-pin' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml#
On Wed, 02 Oct 2024 03:20:08 +0100, Alexey Klimov wrote:
Rebased on top of -master, tested.
Changes since v1: -- removed handling of MI2S clock in sm2450_snd_shutdown(): setting clock rate and disabling it causes audio delay on playback start; -- removed empty sound { } node from sm6115.dtsi as suggested by Krzysztof; -- moved lpi_i2s2_active pins description to qrb423310 board-specific file as suggested by Dmitry Baryshkov; -- moved q6asmdai DAIs to apr soc node as suggested by Konrad Dybcio; -- lpass_tlmm is not disabled; -- lpass_tlmm node moved to sm4250.dtsi; -- kept MultiMedia DAIs as is, without them the sound card driver doesn't initialise; -- added some reviewed-by tags.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/7] ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard commit: bbd1e5ea66f6ca88624faefe0a153637f53ad15d [2/7] ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string commit: b97bc0656a66f89f78098d4d72dc04fa9518ab11
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (5)
-
Alexey Klimov -
Dmitry Baryshkov -
Krzysztof Kozlowski -
Mark Brown -
Rob Herring (Arm)