[PATCH] ASoC: rt1015: Remove unnecessary flush work on rt1015 driver
Remove workqueue of flush work in rt1015 driver since we don't need it after internal discussion, and there is no impact on performance without this workqueue.
Signed-off-by: Jack Yu jack.yu@realtek.com --- sound/soc/codecs/rt1015.c | 39 +-------------------------------------- sound/soc/codecs/rt1015.h | 2 -- 2 files changed, 1 insertion(+), 40 deletions(-)
diff --git a/sound/soc/codecs/rt1015.c b/sound/soc/codecs/rt1015.c index 9238f12999aa..b3e69bf245dd 100644 --- a/sound/soc/codecs/rt1015.c +++ b/sound/soc/codecs/rt1015.c @@ -547,31 +547,6 @@ static int rt1015_bypass_boost_put(struct snd_kcontrol *kcontrol, return 0; }
-static void rt1015_flush_work(struct work_struct *work) -{ - struct rt1015_priv *rt1015 = container_of(work, struct rt1015_priv, - flush_work.work); - struct snd_soc_component *component = rt1015->component; - unsigned int val, i; - - for (i = 0; i < 200; ++i) { - usleep_range(1000, 1500); - dev_dbg(component->dev, "Flush DAC (retry:%u)\n", i); - regmap_read(rt1015->regmap, RT1015_CLK_DET, &val); - if (val & 0x800) - break; - } - - regmap_write(rt1015->regmap, RT1015_SYS_RST1, 0x0597); - regmap_write(rt1015->regmap, RT1015_SYS_RST1, 0x05f7); - regmap_write(rt1015->regmap, RT1015_MAN_I2C, 0x0028); - - if (val & 0x800) - dev_dbg(component->dev, "Flush DAC completed.\n"); - else - dev_warn(component->dev, "Fail to flush DAC data.\n"); -} - static const struct snd_kcontrol_new rt1015_snd_controls[] = { SOC_SINGLE_TLV("DAC Playback Volume", RT1015_DAC1, RT1015_DAC_VOL_SFT, 127, 0, dac_vol_tlv), @@ -630,10 +605,6 @@ static int r1015_dac_event(struct snd_soc_dapm_widget *w, } break;
- case SND_SOC_DAPM_POST_PMU: - regmap_write(rt1015->regmap, RT1015_MAN_I2C, 0x00a8); - break; - case SND_SOC_DAPM_POST_PMD: if (rt1015->bypass_boost == RT1015_Enable_Boost) { snd_soc_component_write(component, @@ -653,8 +624,6 @@ static int r1015_dac_event(struct snd_soc_dapm_widget *w, RT1015_SYS_RST2, 0x0b9a); } rt1015->dac_is_used = 0; - - cancel_delayed_work_sync(&rt1015->flush_work); break;
default: @@ -687,8 +656,6 @@ static int rt1015_amp_drv_event(struct snd_soc_dapm_widget *w, } break; case SND_SOC_DAPM_POST_PMU: - if (rt1015->hw_config == RT1015_HW_28) - schedule_delayed_work(&rt1015->flush_work, msecs_to_jiffies(10)); msleep(rt1015->pdata.power_up_delay_ms); break; default: @@ -702,7 +669,7 @@ static const struct snd_soc_dapm_widget rt1015_dapm_widgets[] = { NULL, 0), SND_SOC_DAPM_AIF_IN("AIFRX", "AIF Playback", 0, SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, - r1015_dac_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + r1015_dac_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_OUT_DRV_E("Amp Drv", SND_SOC_NOPM, 0, 0, NULL, 0, rt1015_amp_drv_event, SND_SOC_DAPM_PRE_PMU | @@ -1028,7 +995,6 @@ static int rt1015_probe(struct snd_soc_component *component) snd_soc_component_get_drvdata(component);
rt1015->component = component; - INIT_DELAYED_WORK(&rt1015->flush_work, rt1015_flush_work);
return 0; } @@ -1037,7 +1003,6 @@ static void rt1015_remove(struct snd_soc_component *component) { struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component);
- cancel_delayed_work_sync(&rt1015->flush_work); regmap_write(rt1015->regmap, RT1015_RESET, 0); }
@@ -1180,8 +1145,6 @@ static int rt1015_i2c_probe(struct i2c_client *i2c, return ret; }
- rt1015->hw_config = (i2c->addr == 0x29) ? RT1015_HW_29 : RT1015_HW_28; - ret = regmap_read(rt1015->regmap, RT1015_DEVICE_ID, &val); if (ret) { dev_err(&i2c->dev, diff --git a/sound/soc/codecs/rt1015.h b/sound/soc/codecs/rt1015.h index 14344532048e..c9f636af7fd1 100644 --- a/sound/soc/codecs/rt1015.h +++ b/sound/soc/codecs/rt1015.h @@ -444,8 +444,6 @@ struct rt1015_priv { int bypass_boost; int dac_is_used; int cali_done; - int hw_config; - struct delayed_work flush_work; };
#endif /* __RT1015_H__ */
On Mon, 26 Jul 2021 09:15:41 +0000, Jack Yu wrote:
Remove workqueue of flush work in rt1015 driver since we don't need it after internal discussion, and there is no impact on performance without this workqueue.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: rt1015: Remove unnecessary flush work on rt1015 driver commit: bc1c8e4eee79646b9ae10ededed06a569c7c2bc9
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (2)
-
Jack Yu
-
Mark Brown