The DIT mode support has not been tested due to lack of platform where it can be tested. To be able to use the McASP on OMAP4/5 (only supporting DIT mode) we need to have DIT mode working in the McASP driver on a know platform. After hacking around (on BBW, mcasp1.axr1 can be routed out for this) it appeared that DIT mode is broken.

This patch fixes it up and 16/24 bit audio works along with passthrough, but I have only tested with DTS example and test files.

Signed-off-by: Peter Ujfalusi peter.ujfalusi@gmail.com --- sound/soc/ti/davinci-mcasp.c | 150 ++++++++++++++++++++++++++++++----- 1 file changed, 129 insertions(+), 21 deletions(-)

diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c index 017a5a5e56cd..64ec6d485834 100644 --- a/sound/soc/ti/davinci-mcasp.c +++ b/sound/soc/ti/davinci-mcasp.c @@ -83,6 +83,8 @@ struct davinci_mcasp { struct snd_pcm_substream *substreams[2]; unsigned int dai_fmt;

+ u32 iec958_status; + /* Audio can not be enabled due to missing parameter(s) */ bool missing_audio_param;

@@ -757,6 +759,9 @@ static int davinci_mcasp_set_tdm_slot(struct snd_soc_dai *dai, { struct davinci_mcasp *mcasp = snd_soc_dai_get_drvdata(dai);

+ if (mcasp->op_mode == DAVINCI_MCASP_DIT_MODE) + return 0; + dev_dbg(mcasp->dev, "%s() tx_mask 0x%08x rx_mask 0x%08x slots %d width %d\n", __func__, tx_mask, rx_mask, slots, slot_width); @@ -827,6 +832,20 @@ static int davinci_config_channel_size(struct davinci_mcasp *mcasp, mcasp_mod_bits(mcasp, DAVINCI_MCASP_RXFMT_REG, RXROT(rx_rotate), RXROT(7)); mcasp_set_reg(mcasp, DAVINCI_MCASP_RXMASK_REG, mask); + } else { + /* + * according to the TRM it should be TXROT=0, this one works: + * 16 bit to 23-8 (TXROT=6, rotate 24 bits) + * 24 bit to 23-0 (TXROT=0, rotate 0 bits) + * + * TXROT = 0 only works with 24bit samples + */ + tx_rotate = (sample_width / 4 + 2) & 0x7; + + mcasp_mod_bits(mcasp, DAVINCI_MCASP_TXFMT_REG, TXROT(tx_rotate), + TXROT(7)); + mcasp_mod_bits(mcasp, DAVINCI_MCASP_TXFMT_REG, TXSSZ(15), + TXSSZ(0x0F)); }

mcasp_set_reg(mcasp, DAVINCI_MCASP_TXMASK_REG, mask); @@ -842,10 +861,16 @@ static int mcasp_common_hw_param(struct davinci_mcasp *mcasp, int stream, u8 tx_ser = 0; u8 rx_ser = 0; u8 slots = mcasp->tdm_slots; - u8 max_active_serializers = (channels + slots - 1) / slots; - u8 max_rx_serializers, max_tx_serializers; + u8 max_active_serializers, max_rx_serializers, max_tx_serializers; int active_serializers, numevt; u32 reg; + + /* In DIT mode we only allow maximum of one serializers for now */ + if (mcasp->op_mode == DAVINCI_MCASP_DIT_MODE) + max_active_serializers = 1; + else + max_active_serializers = (channels + slots - 1) / slots; + /* Default configuration */ if (mcasp->version < MCASP_VERSION_3) mcasp_set_bits(mcasp, DAVINCI_MCASP_PWREMUMGT_REG, MCASP_SOFT); @@ -1031,16 +1056,18 @@ static int mcasp_i2s_hw_param(struct davinci_mcasp *mcasp, int stream, static int mcasp_dit_hw_param(struct davinci_mcasp *mcasp, unsigned int rate) { - u32 cs_value = 0; - u8 *cs_bytes = (u8*) &cs_value; + u8 *cs_bytes = (u8 *)&mcasp->iec958_status;

- /* Set the TX format : 24 bit right rotation, 32 bit slot, Pad 0 - and LSB first */ - mcasp_set_bits(mcasp, DAVINCI_MCASP_TXFMT_REG, TXROT(6) | TXSSZ(15)); + if (!mcasp->dat_port) + mcasp_set_bits(mcasp, DAVINCI_MCASP_TXFMT_REG, TXSEL); + else + mcasp_clr_bits(mcasp, DAVINCI_MCASP_TXFMT_REG, TXSEL);

/* Set TX frame synch : DIT Mode, 1 bit width, internal, rising edge */ mcasp_set_reg(mcasp, DAVINCI_MCASP_TXFMCTL_REG, AFSXE | FSXMOD(0x180));

+ mcasp_set_reg(mcasp, DAVINCI_MCASP_TXMASK_REG, 0xFFFF); + /* Set the TX tdm : for all the slots */ mcasp_set_reg(mcasp, DAVINCI_MCASP_TXTDM_REG, 0xFFFFFFFF);

@@ -1049,16 +1076,8 @@ static int mcasp_dit_hw_param(struct davinci_mcasp *mcasp,

mcasp_clr_bits(mcasp, DAVINCI_MCASP_XEVTCTL_REG, TXDATADMADIS);

- /* Only 44100 and 48000 are valid, both have the same setting */ - mcasp_set_bits(mcasp, DAVINCI_MCASP_AHCLKXCTL_REG, AHCLKXDIV(3)); - - /* Enable the DIT */ - mcasp_set_bits(mcasp, DAVINCI_MCASP_TXDITCTL_REG, DITEN); - /* Set S/PDIF channel status bits */ - cs_bytes[0] = IEC958_AES0_CON_NOT_COPYRIGHT; - cs_bytes[1] = IEC958_AES1_CON_PCM_CODER; - + cs_bytes[3] &= ~IEC958_AES3_CON_FS; switch (rate) { case 22050: cs_bytes[3] |= IEC958_AES3_CON_FS_22050; @@ -1088,12 +1107,15 @@ static int mcasp_dit_hw_param(struct davinci_mcasp *mcasp, cs_bytes[3] |= IEC958_AES3_CON_FS_192000; break; default: - printk(KERN_WARNING "unsupported sampling rate: %d\n", rate); + dev_err(mcasp->dev, "unsupported sampling rate: %d\n", rate); return -EINVAL; }

- mcasp_set_reg(mcasp, DAVINCI_MCASP_DITCSRA_REG, cs_value); - mcasp_set_reg(mcasp, DAVINCI_MCASP_DITCSRB_REG, cs_value); + mcasp_set_reg(mcasp, DAVINCI_MCASP_DITCSRA_REG, mcasp->iec958_status); + mcasp_set_reg(mcasp, DAVINCI_MCASP_DITCSRB_REG, mcasp->iec958_status); + + /* Enable the DIT */ + mcasp_set_bits(mcasp, DAVINCI_MCASP_TXDITCTL_REG, DITEN);

return 0; } @@ -1237,12 +1259,18 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream, int slots = mcasp->tdm_slots; int rate = params_rate(params); int sbits = params_width(params); + unsigned int bclk_target;

if (mcasp->slot_width) sbits = mcasp->slot_width;

+ if (mcasp->op_mode == DAVINCI_MCASP_IIS_MODE) + bclk_target = rate * sbits * slots; + else + bclk_target = rate * 128; + davinci_mcasp_calc_clk_div(mcasp, mcasp->sysclk_freq, - rate * sbits * slots, true); + bclk_target, true); }

ret = mcasp_common_hw_param(mcasp, substream->stream, @@ -1598,6 +1626,77 @@ static const struct snd_soc_dai_ops davinci_mcasp_dai_ops = { .set_tdm_slot = davinci_mcasp_set_tdm_slot, };

+static int davinci_mcasp_iec958_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; + uinfo->count = 1; + + return 0; +} + +static int davinci_mcasp_iec958_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *uctl) +{ + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); + struct davinci_mcasp *mcasp = snd_soc_dai_get_drvdata(cpu_dai); + + memcpy(uctl->value.iec958.status, &mcasp->iec958_status, + sizeof(mcasp->iec958_status)); + + return 0; +} + +static int davinci_mcasp_iec958_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *uctl) +{ + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); + struct davinci_mcasp *mcasp = snd_soc_dai_get_drvdata(cpu_dai); + + memcpy(&mcasp->iec958_status, uctl->value.iec958.status, + sizeof(mcasp->iec958_status)); + + return 0; +} + +static int davinci_mcasp_iec958_con_mask_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); + struct davinci_mcasp *mcasp = snd_soc_dai_get_drvdata(cpu_dai); + + memset(ucontrol->value.iec958.status, 0xff, sizeof(mcasp->iec958_status)); + return 0; +} + +static const struct snd_kcontrol_new davinci_mcasp_iec958_ctls[] = { + { + .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_VOLATILE), + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), + .info = davinci_mcasp_iec958_info, + .get = davinci_mcasp_iec958_get, + .put = davinci_mcasp_iec958_put, + }, { + .access = SNDRV_CTL_ELEM_ACCESS_READ, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK), + .info = davinci_mcasp_iec958_info, + .get = davinci_mcasp_iec958_con_mask_get, + }, +}; + +static void davinci_mcasp_init_iec958_status(struct davinci_mcasp *mcasp) +{ + unsigned char *cs = (u8 *)&mcasp->iec958_status; + + cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE; + cs[1] = IEC958_AES1_CON_PCM_CODER; + cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC; + cs[3] = IEC958_AES3_CON_CLOCK_1000PPM; +} + static int davinci_mcasp_dai_probe(struct snd_soc_dai *dai) { struct davinci_mcasp *mcasp = snd_soc_dai_get_drvdata(dai); @@ -1605,6 +1704,12 @@ static int davinci_mcasp_dai_probe(struct snd_soc_dai *dai) dai->playback_dma_data = &mcasp->dma_data[SNDRV_PCM_STREAM_PLAYBACK]; dai->capture_dma_data = &mcasp->dma_data[SNDRV_PCM_STREAM_CAPTURE];

+ if (mcasp->op_mode == DAVINCI_MCASP_DIT_MODE) { + davinci_mcasp_init_iec958_status(mcasp); + snd_soc_add_dai_controls(dai, davinci_mcasp_iec958_ctls, + ARRAY_SIZE(davinci_mcasp_iec958_ctls)); + } + return 0; }

@@ -1651,7 +1756,8 @@ static struct snd_soc_dai_driver davinci_mcasp_dai[] = { .channels_min = 1, .channels_max = 384, .rates = DAVINCI_MCASP_RATES, - .formats = DAVINCI_MCASP_PCM_FMTS, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, }, .ops = &davinci_mcasp_dai_ops, }, @@ -1871,6 +1977,8 @@ static int davinci_mcasp_get_config(struct davinci_mcasp *mcasp, } else { mcasp->tdm_slots = pdata->tdm_slots; } + } else { + mcasp->tdm_slots = 32; }

mcasp->num_serializer = pdata->num_serializer;

From: Peter Ujfalusi peter.ujfalusi@ti.com

There is a single McASP on OMAP4 (and OMAP5) which is configured to only support DIT playback mode on a single serializer.

Add 0x200 offset to DAT port address as the TRM suggests it.

Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- include/linux/platform_data/davinci_asp.h | 1 + sound/soc/ti/Kconfig | 1 + sound/soc/ti/davinci-mcasp.c | 26 ++++++++++++++++++++--- 3 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/include/linux/platform_data/davinci_asp.h b/include/linux/platform_data/davinci_asp.h index 5d1fb0d78a22..76b13ef67562 100644 --- a/include/linux/platform_data/davinci_asp.h +++ b/include/linux/platform_data/davinci_asp.h @@ -96,6 +96,7 @@ enum { MCASP_VERSION_2, /* DA8xx/OMAPL1x */ MCASP_VERSION_3, /* TI81xx/AM33xx */ MCASP_VERSION_4, /* DRA7xxx */ + MCASP_VERSION_OMAP, /* OMAP4/5 */ };

enum mcbsp_clk_input_pin { diff --git a/sound/soc/ti/Kconfig b/sound/soc/ti/Kconfig index 698d7bc84dcf..1d9fe3fca193 100644 --- a/sound/soc/ti/Kconfig +++ b/sound/soc/ti/Kconfig @@ -35,6 +35,7 @@ config SND_SOC_DAVINCI_MCASP various Texas Instruments SoCs like: - daVinci devices - Sitara line of SoCs (AM335x, AM438x, etc) + - OMAP4 - DRA7x devices - Keystone devices - K3 devices (am654, j721e) diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c index 64ec6d485834..56a19eeec5c7 100644 --- a/sound/soc/ti/davinci-mcasp.c +++ b/sound/soc/ti/davinci-mcasp.c @@ -1794,6 +1794,12 @@ static struct davinci_mcasp_pdata dra7_mcasp_pdata = { .version = MCASP_VERSION_4, };

+static struct davinci_mcasp_pdata omap_mcasp_pdata = { + .tx_dma_offset = 0x200, + .rx_dma_offset = 0, + .version = MCASP_VERSION_OMAP, +}; + static const struct of_device_id mcasp_dt_ids[] = { { .compatible = "ti,dm646x-mcasp-audio", @@ -1811,6 +1817,10 @@ static const struct of_device_id mcasp_dt_ids[] = { .compatible = "ti,dra7-mcasp-audio", .data = &dra7_mcasp_pdata, }, + { + .compatible = "ti,omap4-mcasp-audio", + .data = &omap_mcasp_pdata, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mcasp_dt_ids); @@ -2350,10 +2360,17 @@ static int davinci_mcasp_probe(struct platform_device *pdev)

dma_data = &mcasp->dma_data[SNDRV_PCM_STREAM_PLAYBACK]; dma_data->filter_data = "tx"; - if (dat) + if (dat) { dma_data->addr = dat->start; - else + /* + * According to the TRM there should be 0x200 offset added to + * the DAT port address + */ + if (mcasp->version == MCASP_VERSION_OMAP) + dma_data->addr += davinci_mcasp_txdma_offset(mcasp->pdata); + } else { dma_data->addr = mem->start + davinci_mcasp_txdma_offset(mcasp->pdata); + }

/* RX is not valid in DIT mode */ @@ -2418,7 +2435,10 @@ static int davinci_mcasp_probe(struct platform_device *pdev) ret = edma_pcm_platform_register(&pdev->dev); break; case PCM_SDMA: - ret = sdma_pcm_platform_register(&pdev->dev, "tx", "rx"); + if (mcasp->op_mode == DAVINCI_MCASP_IIS_MODE) + ret = sdma_pcm_platform_register(&pdev->dev, "tx", "rx"); + else + ret = sdma_pcm_platform_register(&pdev->dev, "tx", NULL); break; case PCM_UDMA: ret = udma_pcm_platform_register(&pdev->dev);

OMAP4 has a single McASP instance with single serializer and locked for DIT mode. To be able to enable the support the following fixes needed: - Add the DAT port ranges to the target module's ranges - SIDLE mode must be disabled as it is not working with McASP most likely module integration issue with McASP

We can already fill in the op-mode and serial-dir for McASP as it only supports this configuration, but keep the module disabled as there is no known device available where it is used.

Signed-off-by: Peter Ujfalusi peter.ujfalusi@gmail.com --- arch/arm/boot/dts/omap4-l4-abe.dtsi | 38 +++++++++++++++-------------- 1 file changed, 20 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi index 8287fdaa526e..a8d66240d17d 100644 --- a/arch/arm/boot/dts/omap4-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi @@ -186,36 +186,38 @@ mcbsp3: mcbsp@0 { };

target-module@28000 { /* 0x40128000, ap 8 08.0 */ + /* 0x4012a000, ap 10 0a.0 */ compatible = "ti,sysc-mcasp", "ti,sysc"; reg = <0x28000 0x4>, <0x28004 0x4>; reg-names = "rev", "sysc"; ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; + <SYSC_IDLE_NO>; /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x28000 0x1000>, - <0x49028000 0x49028000 0x1000>; - - /* - * Child device unsupported by davinci-mcasp. At least - * RX path is disabled for omap4, and only DIT mode - * works with no I2S. See also old Android kernel - * omap-mcasp driver for more information. - */ - }; - - target-module@2a000 { /* 0x4012a000, ap 10 0a.0 */ - compatible = "ti,sysc"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x2a000 0x1000>, + <0x49028000 0x49028000 0x1000>, + <0x2000 0x2a000 0x1000>, <0x4902a000 0x4902a000 0x1000>; + + mcasp0: mcasp@0 { + compatible = "ti,omap4-mcasp-audio"; + reg = <0x0 0x2000>, + <0x4902a000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx"; + dmas = <&sdma 8>; + dma-names = "tx"; + clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>; + clock-names = "fck"; + op-mode = <1>; /* MCASP_DIT_MODE */ + serial-dir = < 1 >; /* 1 TX serializers */ + status = "disabled"; + }; };

target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */