ok you can find attached my codec0 output data. I hope this helps. if

you or anyone else need any other piece of info, please ask.

----

Messaggio originale---- Apparently (I assume) this is not for all via

sound chips so it's best to expalin what your setup is. The output from lspci does not tell the story on the codec at times. The best output is

from /proc/asound/card0/codec#0

On Wed, 2010-05-19 at 11:33 +0200, mutenmaster@tiscali.it wrote:

hello people,

i am really

determined in letting you know, for the

third time, that my front

mic input does not work. i do not know if the

rear one works, i

suspect not, but it's not important, because

before the following

commit, the front mic input worked:

$ sudo git bisect bad

f5271101faf1655d862849f42518c2a88ef394fb

is the first bad commit

commit f5271101faf1655d862849f42518c2a88ef394fb

Author: Lydia

Wang

lydiawang@viatech.com.cn Date: Sat Oct 10 19:07: 35

2009 +0800

ALSA HDA VIA: Add VIA_CTL_WIDGET_ANALOG_MUTE

control type

Enter 

low power state if AA-Path volume is

muted.

Signed-off-by: 

Lydia Wang <lydiawang@viatech.

com.cn>

Signed-off-by: Logan Li loganli@viatech.com.cn

Signed-off-by:

Takashi Iwai <tiwai@suse. de>

:040000

040000

ab1ae14ff67f0b08848faeb3ad68def7f3e727f0

0bfbfde11fe32e87e8edbdb3c4d03c2d30370393 M sound

i'm

copypasting

the lspci ouput, so that you can have a general idea

of what kind of

machine i have. please let me know if there is

any other info you need

to solve this bug.

more details on

the problem:

doing $ arecord -f cd test.wav

produces a

file of 44 bytes. it's as if no microphone is

attached to the

jack. this behaviour has been evolving from the commit

i showed

you forth. at the beginning, a file with actual data was

produced, but no audio came out of the speakers when reproducing

it.

going on with the

commits, the file became 44 bytes long.

yours,

vasilis

--

$ lspci -vvv

00:00.0 Host

bridge: Advanced Micro Devices

[AMD] RS780 Host Bridge Alternate

Subsystem: ASUSTeK Computer Inc.

Device 83a2 Control: I/O- Mem+

BusMaster+ SpecCycle- MemWINV-

VGASnoop- ParErr- Stepping- SERR-

FastB2B- DisINTx-

Status: Cap+

66MHz+ UDF- FastB2B- ParErr-

DEVSEL=medium >TAbort- <TAbort- <MAbort+

...

SERR- <PERR- INTx-

Latency: 0

Capabilities:

[c4] HyperTransport:

Slave or Primary

Interface

Command: 

BaseUnitID=0 UnitCnt=12 MastHost-

DefDir-

DUL-

Link Control 0: 

CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-

<CRCErr=0 IsocEn+ LSEn- ExtCTL- 64b-

Link Config 0: MLWI=16bit 

DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-

Link Control

1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0

IsocEn- LSEn-

ExtCTL- 64b-

Link Config 1: MLWI=8bit 

DwFcIn- MLWO=8bit

DwFcOut-

LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-

Revision ID: 3.00

Link Frequency 0: [b]

Link Error 0: 

<Prot- <Ovfl- <EOC- CTLTm-

Link

Frequency Capability 0: 200MHz+

300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+

1.0GHz+ 1.2GHz- 1.4GHz- 1.6

GHz- Vend-

Feature 

Capability: IsocFC-

LDTSTOP+ CRCTM- ECTLT-

64bA- UIDRD-

Link 

Frequency 1: 200MHz

Link 

Error 1: <Prot-

<Ovfl- <EOC- CTLTm-

Link Frequency Capability 1:

200MHz-

300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz-

1.6

GHz- Vend-

Error Handling: 

PFlE- OFlE- PFE- OFE- EOCFE- RFE-

CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-

Prefetchable memory behind bridge

Upper: 00-00

Bus Number: 00

Capabilities: [54]

HyperTransport: UnitID Clumping

Capabilities:

[40]

HyperTransport: Retry Mode

Capabilities: [9c]

HyperTransport: #1a

Capabilities: [f8] HyperTransport: #1c

00:02.0 PCI bridge: Advanced

Micro Devices [AMD] RS780 PCI to PCI

bridge (ext gfx port 0) (prog-if

00 [Normal decode]) Control:

I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-

VGASnoop- ParErr-

Stepping- SERR+ FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF-

FastB2B- ParErr- DEVSEL=fast

TAbort- <TAbort- <MAbort-

...

SERR-

<PERR- INTx-

Latency: 0, Cache

Line Size: 64 bytes

Bus:

primary=00, secondary=01, subordinate=01, sec-latency=0

I/O behind

bridge: 0000d000-

0000dfff

Memory behind bridge: fea00000-feafffff

Prefetchable

memory behind bridge: 00000000d0000000- 00000000dfffffff

Secondary

status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- <SERR- <PERR-

BridgeCtl:

Parity+ SERR+ NoISA- VGA+ MAbort-

...

Reset- FastB2B-

PriDiscTmr- 

SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [50] Power

Management version 3

Flags: PMEClk- DSI- D1-

D2- AuxCurrent=0mA

PME(D0+,D1-,D2-,D3hot+, D3cold+)

Status: D0 PME-

Enable- DSel=0

DScale=0 PME-

Capabilities: [58] Express (v2) Root Port

(Slot+),

MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency

L0s

<64ns, L1 <1us

	ExtTag+ RBE+ FLReset-
DevCtl:	Report errors: 

Correctable- Non-Fatal- Fatal- Unsupported-

	RlxdOrd+ ExtTag- 

PhantFunc- AuxPwr- NoSnoop+

	MaxPayload 128 bytes, MaxReadReq 

128

bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-

AuxPwr-

TransPend-

LnkCap:	Port #0, Speed 5GT/s, Width x16, 

ASPM L0s L1,

Latency L0 <64ns, L1 <1us

	ClockPM- Suprise- 

LLActRep+ BwNot+

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled-

Retrain- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt-

AutBWInt-

LnkSta:	Speed 2.5

GT/s,

Width x16, TrErr- Train-

SlotClk+ DLActive+ BWMgmt+ ABWMgmt-

SltCap:	

AttnBtn- PwrCtrl-

MRL- AttnInd- PwrInd- HotPlug- Surpise-

	Slot #  2, 

PowerLimit

75.000000; Interlock- NoCompl+

SltCtl:	Enable: AttnBtn- 

PwrFlt-

MRL- PresDet- CmdCplt- HPIrq- LinkChg-

	Control: AttnInd 

Unknown, PwrInd Unknown, Power- Interlock-

SltSta:	Status: 

AttnBtn-

PowerFlt- MRL- CmdCplt-

PresDet+ Interlock-

	Changed: 

MRL- PresDet+

LinkState+

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-

PMEIntEna-

CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID

0000,

PMEStatus- PMEPending-

DevCap2: 

Completion Timeout: Not

Supported, TimeoutDis- ARIFwd-

DevCtl2: 

Completion Timeout: 50us to

50ms, TimeoutDis- ARIFwd- LnkCtl2:

Target Link Speed: 5GT/s,

EnterCompliance- SpeedDis-, Selectable De-

emphasis: -3.5dB

Transmit

Margin: Normal Operating Range,

EnterModifiedCompliance- ComplianceSOS-

	 Compliance De-

emphasis: -6dB

LnkSta2: 

Current De-emphasis Level:

-3.5dB

Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit-

Count=1/1 Enable+

Address: 

fee0f00c Data: 4159

Capabilities:

[b0]

Subsystem: ASUSTeK

Computer Inc. Device 83a2

Capabilities:

[b8]

HyperTransport: MSI

Mapping Enable+ Fixed+

Capabilities:

[100] Vendor

Specific

Information <?>

Capabilities: [110]

Virtual Channel <?>

Kernel

driver in use: pcieport-driver

00:0a.0 PCI bridge: Advanced

Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) (prog-if 00

[Normal decode]) Control: I/O+

Mem+ BusMaster+ SpecCycle- MemWINV-

VGASnoop- ParErr- Stepping-

SERR+ FastB2B- DisINTx+

Status: Cap+

66MHz- UDF- FastB2B-

ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-

...

SERR- <PERR- INTx-

Latency: 0, Cache Line

Size: 64 bytes

Bus: primary=00,

secondary=02, subordinate=02, sec- latency=0

I/O behind bridge:

0000e000-0000efff

Memory behind

bridge: feb00000-febfffff

Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff

Secondary status: 66MHz-

FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- <SERR-

<PERR-

BridgeCtl: Parity+ SERR+ NoISA+

VGA- MAbort-

...

Reset-

FastB2B-

PriDiscTmr- SecDiscTmr- 

DiscTmrStat- DiscTmrSERREn-

Capabilities: [50] Power Management version 3

Flags: PMEClk- DSI- 

D1-

D2- AuxCurrent=0mA PME(D0+,D1-

,D2-,D3hot+,D3cold+)

Status: 

D0 PME-

Enable- DSel=0 DScale=0

PME-

Capabilities: [58] Express

(v2) Root Port

(Slot+), MSI 00

DevCap:	MaxPayload 128 bytes, 

PhantFunc 0, Latency

L0s <64ns,

L1 <1us

	ExtTag+ RBE+ FLReset-

DevCtl:	Report errors: 

Correctable- Non-Fatal- Fatal- Unsupported-

	RlxdOrd+ ExtTag- 

PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 128

bytes DevSta: CorrErr-

UncorrErr- FatalErr- UnsuppReq- AuxPwr-

TransPend- LnkCap: Port

#1, Speed 5GT/s, Width x1, ASPM L0s L1,

Latency L0 <64ns, L1 <1us

ClockPM- Suprise- LLActRep+ BwNot+

LnkCtl: ASPM Disabled; RCB

64 bytes Disabled- Retrain- CommClk+

ExtSynch- ClockPM-

AutWidDis- BWInt- AutBWInt-

LnkSta:	Speed 

2.5GT/s,

Width x1,

TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-

SltCap:	

AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-

	Slot #  

a,

PowerLimit 25.000000; Interlock-

NoCompl+

SltCtl:	Enable: 

AttnBtn-

PwrFlt- MRL- PresDet-

CmdCplt- HPIrq- LinkChg-

Control: AttnInd

Unknown, PwrInd

Unknown, Power- Interlock-

SltSta: Status: AttnBtn-

PowerFlt-

MRL- CmdCplt- PresDet+ Interlock-

	Changed: MRL- PresDet+ 

LinkState+

RootCtl: ErrCorrectable- 

ErrNon-Fatal- ErrFatal-

PMEIntEna- CRSVisible-

RootCap: 

CRSVisible-

RootSta: PME 

ReqID

0000, PMEStatus- PMEPending-

DevCap2: Completion Timeout: Not

Supported, TimeoutDis- ARIFwd-

DevCtl2: Completion Timeout: 50us to

50ms, TimeoutDis- ARIFwd-

LnkCtl2: Target Link Speed: 2.5GT/s,

EnterCompliance- SpeedDis-,

Selectable De-emphasis: -6dB

	 Transmit 

Margin: Normal Operating

Range, EnterModifiedCompliance- ComplianceSOS-

	 Compliance De-

emphasis: -6dB

LnkSta2: Current De-emphasis Level: 

-6dB

Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit-

Count=1/1 Enable+

Address: fee0f00c  Data: 4161

Capabilities:

[b0]

Subsystem: ASUSTeK Computer Inc. Device 83a2 Capabilities:

[b8]

HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities:

[100] Vendor

Specific Information <?> Capabilities: [110]

Virtual Channel <?>

Kernel driver in use: pcieport-driver

00:11.0 SATA controller: ATI

Technologies Inc SB700/SB800 SATA

Controller [AHCI mode] (prog-if 01

[AHCI 1.0]) Subsystem:

ASUSTeK Computer Inc. Device 8389

Control: I/O+ Mem+ BusMaster+

SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-

SERR+ FastB2B-

DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B- ParErr-

DEVSEL=medium TAbort-

<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64,

Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 22

Region 0: I/O ports at c000 [size=8]

Region 1: I/O ports at b000

[size=4]

Region 2: I/O ports at a000 [size=8]

Region 3: I/O

ports at

9000

[size=4]

Region 4: I/O ports at 8000 [size=16]

Region 5: Memory

at fe9ffc00 (32-bit, non-prefetchable) [size=1K]

Capabilities:

[60]

Power Management version 2 Flags: PMEClk-

DSI+ D1- D2- AuxCurrent=0mA

PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 PME- Enable- DSel=0

DScale=0 PME- Capabilities: [70]

SATA HBA <?>

Kernel driver in use:

ahci

00:12.0 USB

Controller: ATI Technologies Inc SB700/SB800 USB

OHCI0 Controller

(prog-if 10 [OHCI])

Subsystem: ASUSTeK Computer Inc. Device 8389

Control:

I/O- Mem+ BusMaster+ SpecCycle- MemWINV-

VGASnoop-

ParErr- Stepping- SERR+ FastB2B- DisINTx-

Status: Cap- 66MHz+

UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-

SERR- <PERR- INTx-

Latency: 64, Cache Line Size: 64 bytes

Interrupt:

pin A routed to

IRQ 16

Region 0: Memory at fe9fe000

(32-bit, non-

prefetchable)

[size=4K]

Kernel driver in use:

ohci_hcd

Kernel modules: ohci-

hcd

00:12.1 USB Controller:

ATI Technologies Inc SB700

USB

OHCI1 Controller (prog-if 10 [OHCI])

Subsystem: ASUSTeK Computer

Inc. Device 8389

Control: I/O+

Mem+ BusMaster+ SpecCycle- MemWINV+

VGASnoop- ParErr- Stepping-

SERR+ FastB2B- DisINTx-

Status: Cap-

66MHz+ UDF- FastB2B+

ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-

...

SERR- <PERR-

INTx-

Latency: 64, Cache Line Size: 64

bytes

Interrupt: pin A

routed to IRQ 16

Region 0: Memory at

fe9fd000 (32-bit, non-

prefetchable) [size=4K]

Kernel driver in

use: ohci_hcd

Kernel

modules: ohci-hcd

00:12.2 USB

Controller: ATI Technologies Inc

SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])

Subsystem:

ASUSTeK

Computer Inc. Device 8389

Control: I/O- Mem+ BusMaster+

SpecCycle-

MemWINV+ VGASnoop-

ParErr- Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz+

UDF- FastB2B+ ParErr- DEVSEL=medium

TAbort- <TAbort- <MAbort- SERR- <PERR- INTx- Latency: 64,

Cache Line Size: 64 bytes

Interrupt: pin B routed to IRQ 17

Region 0: Memory at fe9ff800 (32-

bit, non-prefetchable) [size=256]

Capabilities: [c0] Power

Management

version 2 Flags: PMEClk-

DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,

D3hot+,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Bridge: 

PM- B3+

Capabilities: [e4] Debug port: BAR=1 offset=00e0

Kernel driver

in use: ehci_hcd

Kernel

modules: ehci-hcd

00:13.0 USB

Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-

if 10 [OHCI]) Subsystem:

ASUSTeK Computer Inc. Device 8389

Control: I/O- Mem+ BusMaster+

SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-

SERR+ FastB2B-

DisINTx-

Status: Cap- 66MHz+

UDF- FastB2B+ ParErr-

DEVSEL=medium TAbort- <TAbort- <MAbort- SERR- <PERR- INTx- Latency: 64, Cache

Line Size: 64 bytes

Interrupt: pin A routed to IRQ 18

Region

0: Memory at fe9fc000 (32-bit, non-prefetchable) [size=4K]

Kernel

driver in use: ohci_hcd

Kernel modules: ohci-hcd

00:13.1 USB

Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10

[OHCI])

Subsystem: ASUSTeK Computer Inc. Device 8389

Control: I/O+

Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+

FastB2B- DisINTx- Status: Cap- 66MHz+ UDF-

FastB2B+ ParErr-

DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency:

64, Cache Line Size: 64 bytes Interrupt:

pin A routed to IRQ 18

Region 0: Memory at fe9fb000 (32-bit, non-

prefetchable) [size=4K]

Kernel driver in use: ohci_hcd Kernel

modules: ohci-hcd

00:13.2 USB Controller: ATI Technologies Inc

SB700/SB800 USB EHCI Controller (prog-

if 20 [EHCI]) Subsystem:

ASUSTeK Computer Inc. Device 8389

Control: I/O- Mem+ BusMaster+

SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-

SERR+ FastB2B-

DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium

TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64,

Cache Line Size: 64 bytes

Interrupt: pin B routed to IRQ 19

Region 0: Memory at fe9ff400 (32-bit, non-prefetchable) [size=256]

Capabilities: [c0] Power Management version 2

Flags: PMEClk- 

DSI- D1+

D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)

Status: D0 PME-

Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+

Capabilities: [e4]

Debug port: BAR=1 offset=00e0 Kernel driver

in use: ehci_hcd

Kernel modules: ehci-hcd

00:14.0 SMBus:

ATI Technologies Inc SBx00 SMBus

Controller (rev 3c) Subsystem:

ASUSTeK Computer Inc. Device 8389

Control: I/O+ Mem+ BusMaster-

SpecCycle- MemWINV- VGASnoop- ParErr-

Stepping- SERR- FastB2B-

DisINTx+

Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium

TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-

Capabilities:

[b0] HyperTransport: MSI Mapping Enable- Fixed+

00:14.1 IDE

interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if

8a [Master SecP PriP])

Subsystem: ASUSTeK Computer Inc. Device 8389

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-

ParErr-

Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+

UDF- FastB2B-

ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-

SERR- <PERR- INTx-

Latency: 64 Interrupt: pin A routed to

IRQ 16

Region 0: I/O ports at 01f0 [size=8] Region 1: I/O

ports at 03f4 [size=1]

Region 2: I/O ports at 0170 [size=8]

Region 3: I/O ports at 0374 [size=1]

Region 4: I/O ports at ff00

[size=16]

Capabilities: [70] Message Signalled Interrupts: Mask-

64bit- Count=1/1 Enable-

Address: 00000000  Data: 

0000

Kernel driver in use: pata_atiixp

00:14.2 Audio device: ATI

Technologies Inc SBx00 Azalia (Intel HDA)

Subsystem: ASUSTeK

Computer

Inc. Device

836c

Control: I/O- Mem+ BusMaster+

SpecCycle- MemWINV-

VGASnoop-

ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz-

UDF- FastB2B- ParErr- DEVSEL=slow

TAbort- <TAbort- <MAbort-

...

SERR-

<PERR- INTx-

Latency: 64,

Cache Line Size: 64 bytes

Interrupt:

pin ? routed to IRQ 16

Region 0: Memory at fe9f4000 (64-bit, non-

prefetchable) [size=16K]

Capabilities: [50] Power Management version

2

Flags: PMEClk- 

DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-, D3hot+,

D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Kernel driver

in

use: HDA Intel

Kernel modules: snd-hda-intel

00:14.3 ISA

bridge:

ATI Technologies Inc SB700/SB800 LPC host

controller

Subsystem:

ASUSTeK Computer Inc. Device 8389

Control: I/O+ Mem+ BusMaster+

SpecCycle+ MemWINV- VGASnoop- ParErr-

Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz+ UDF-

FastB2B- ParErr- DEVSEL=medium >TAbort-

<TAbort- <MAbort- >SERR-

<PERR- INTx-

Latency: 0

00:14.4 PCI bridge: ATI Technologies

Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive

decode])

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-

ParErr-

Stepping- SERR+ FastB2B- DisINTx-

Status: Cap- 66MHz+ UDF-

FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

INTx-

Latency: 64 Bus: primary=00, secondary=03,

subordinate=03, sec-

latency=64 I/O behind bridge: 0000f000-

00000fff

Memory

behind bridge:

fff00000-000fffff Prefetchable

memory behind bridge: fff00000-000fffff

Secondary status: 66MHz-

FastB2B+ ParErr- DEVSEL=medium >TAbort-

<TAbort- <MAbort+ <SERR-

<PERR-

BridgeCtl: Parity+ SERR+ NoISA+ VGA-

MAbort- >Reset-

FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat-

DiscTmrSERREn-

00:14.5

USB Controller: ATI Technologies Inc

SB700/SB800 USB OHCI2

Controller (prog-if 10 [OHCI])

Subsystem: ASUSTeK Computer Inc.

Device 8389

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-

VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-

Status: Cap-

66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-

<TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 64, Cache Line Size: 64

bytes

Interrupt: pin C routed to IRQ 18 Region 0: Memory at

fe9fa000

(32-bit, non-prefetchable) [size=4K] Kernel driver in

use: ohci_hcd

Kernel modules: ohci-hcd

00:18.0 Host bridge:

Advanced Micro Devices

[AMD] Family 10h [Opteron, Athlon64,

Sempron] HyperTransport

Configuration Control: I/O- Mem-

BusMaster- SpecCycle- MemWINV-

VGASnoop- ParErr- Stepping- SERR-

FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr-

DEVSEL=fast

TAbort- <TAbort- <MAbort-

...

SERR- <PERR- INTx-

Capabilities: [80] HyperTransport: Host or

Secondary Interface

Command: WarmRst+ DblEnd- DevNum=0 ChainSide-

HostHide+ Slave-

<EOCErr- DUL-

Link 

Control: CFlE- CST- CFE- <LkFail-

Init+ EOC-

TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-

Link Config: 

MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit

DwFcOutEn- Revision ID:

3.00

Link Frequency: [b]
Link 

Error:

<Prot- <Ovfl- <EOC-

CTLTm-

Link Frequency Capability: 

200MHz+ 300MHz-

400MHz+

500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4 GHz- 1.6GHz- Vend-

Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS-

UCnfE-

00:18.1 Host bridge:

Advanced Micro Devices [AMD] Family 10h

[Opteron, Athlon64,

Sempron] Address Map

Control: I/O- Mem-

BusMaster-

SpecCycle-

MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-

<TAbort- <MAbort- >SERR- <PERR- INTx-

00:

18.2 Host bridge: Advanced

Micro Devices [AMD] Family 10h [Opteron,

Athlon64, Sempron] DRAM

Controller Control: I/O- Mem- BusMaster-

SpecCycle- MemWINV- VGASnoop-

ParErr- Stepping- SERR- FastB2B-

DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast

TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel modules:

amd64_edac_mod

00:18.3 Host bridge: Advanced Micro Devices

[AMD] Family 10h [Opteron, Athlon64, Sempron]

Miscellaneous Control

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-

ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz-

UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR-

<PERR- INTx-

Capabilities: [f0] Secure device <?>

00: 18.4

Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,

Athlon64, Sempron] Link Control

Control: I/O- Mem- BusMaster-

SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-

<TAbort- <MAbort- >SERR- <PERR- INTx-

01:00.0 VGA compatible

controller: ATI Technologies Inc Device 954f (prog-if 00 [VGA

controller])

Subsystem: ASUSTeK Computer Inc. Device 02a8

Control:

I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-

Stepping-

SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF-

FastB2B- ParErr-

DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-

<PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes Interrupt:

pin A routed to IRQ 18

Region 0: Memory at d0000000 (64-bit,

prefetchable) [size=256M]

Region 2: Memory at feaf0000 (64-bit,

non-prefetchable) [size=64K]

Region 4: I/O ports at d000

[size=256]

Expansion ROM at feac0000 [disabled] [size=128K]

Capabilities: [50] Power Management version 3

Flags: PMEClk- DSI- 

D1+

D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status:

D0 PME-

Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express

(v2) Legacy

Endpoint, MSI 00 DevCap: MaxPayload 128 bytes,

PhantFunc 0, Latency

L0s <4us, L1 unlimited ExtTag+ AttnBtn-

AttnInd- PwrInd- RBE+

FLReset- DevCtl: Report errors:

Correctable- Non-Fatal- Fatal-

Unsupported- RlxdOrd+ ExtTag-

PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq

128 bytes

DevSta:	CorrErr- 

UncorrErr- FatalErr- UnsuppReq-

AuxPwr- TransPend-

LnkCap:	Port #0, 

Speed 2.5GT/s, Width x16,

ASPM L0s L1, Latency L0 <64ns, L1 <1us

ClockPM- Suprise-

LLActRep- BwNot-

LnkCtl:	ASPM Disabled; RCB 64 

bytes Disabled-

Retrain- CommClk+

	ExtSynch- ClockPM- AutWidDis- 

BWInt-

AutBWInt-

LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- 

SlotClk+ DLActive- BWMgmt- ABWMgmt-

DevCap2: Completion Timeout: 

Not

Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to

50ms,

TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s,

EnterCompliance-

SpeedDis-, Selectable De-emphasis: -6dB

Transmit Margin: Normal

Operating Range, EnterModifiedCompliance-

ComplianceSOS-

	 Compliance 

De-emphasis: -6dB LnkSta2:

Current De-emphasis Level: -6dB

Capabilities: [a0] Message

Signalled Interrupts: Mask- 64bit+ Count=1/1

Enable- Address:

0000000000000000 Data: 0000

Capabilities: [100] Vendor Specific

Information <?>

01:00.1 Audio device: ATI Technologies Inc

Device aa38

Subsystem: ASUSTeK Computer Inc. Device aa38

Control:

I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-

Stepping-

SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF-

FastB2B- ParErr-

DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-

<PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes Interrupt:

pin B routed to IRQ 28

Region 0: Memory at feaec000 (64-bit, non-

prefetchable) [size=16K]

Capabilities: [50] Power Management

version 3

Flags: PMEClk- DSI- D1+ D2+ 

AuxCurrent=0mA PME(D0-,D1-

, D2-,D3hot-,D3cold-)

Status: D0 PME-Enable- 

DSel=0 DScale=0

PME-

Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us,

L1

unlimited

	ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128

bytes,

MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr-

FatalErr- UnsuppReq-

AuxPwr- TransPend- LnkCap: Port #0, Speed

2.5GT/s, Width x16, ASPM

L0s L1, Latency L0 <64ns, L1 <1us

ClockPM- Suprise- LLActRep- BwNot-

LnkCtl:	ASPM Disabled; RCB 

64 bytes Disabled- Retrain- CommClk+

ExtSynch- ClockPM-

AutWidDis- BWInt- AutBWInt-

LnkSta:	Speed 2.5GT/s, 

Width x16,

TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

DevCap2: 

Completion Timeout: Not Supported, TimeoutDis-

DevCtl2: 

Completion

Timeout: 50us to

50ms, TimeoutDis-

LnkCtl2: Target 

Link Speed: 2.5

GT/s,

EnterCompliance- SpeedDis-, Selectable De- emphasis: -6dB

Transmit Margin: Normal Operating Range, EnterModifiedCompliance-

ComplianceSOS-

	 Compliance De-

emphasis: -6dB

LnkSta2: Current 

De-

emphasis Level: -6dB

Capabilities: [a0] Message Signalled Interrupts:

Mask- 64bit+

Count=1/1 Enable+

Address: 

00000000fee0f00c Data: 4189

Capabilities: [100] Vendor Specific Information <?>

Kernel driver

in

use: HDA Intel Kernel

modules: snd-hda-intel

02:00.0

Ethernet

controller: Realtek

Semiconductor Co., Ltd. RTL8111/8168B PCI Express

Gigabit Ethernet

controller (rev 03)

Subsystem:

ASUSTeK Computer Inc.

Device 83a3

Control: I/O+ Mem+ BusMaster+

SpecCycle- MemWINV-

VGASnoop-

ParErr- Stepping- SERR+ FastB2B- DisINTx+

Status: Cap+ 66MHz-

UDF- FastB2B- ParErr- DEVSEL=fast

TAbort- <TAbort- <MAbort-

...

SERR-

<PERR- INTx-

Latency: 0, Cache

Line Size: 64 bytes

Interrupt:

pin A routed to IRQ 27

Region

0: I/O ports at e800 [size=256]

Region

2: Memory at fdfff000 (64-

bit, prefetchable) [size=4K]

Region 4:

Memory at fdff8000 (64-

bit, prefetchable) [size=16K]

Expansion ROM at

febf0000

[disabled] [size=64K]

Capabilities:

[40] Power Management

version 3

Flags: PMEClk- DSI- D1+ D2+ 

AuxCurrent=375mA PME(D0+, D1+,

D2+,D3hot+,D3cold+) Status: D0 PME-

Enable- DSel=0 DScale=0 PME-

Capabilities: [50] Message Signalled

Interrupts: Mask- 64bit+ Count=1/1

Enable+ Address:

00000000fee0f00c Data: 4179

Capabilities: [70] Express (v2)

Endpoint, MSI 01

DevCap:	

MaxPayload 256 bytes, PhantFunc

0,

Latency L0s <512ns, L1 <64us

ExtTag- AttnBtn- AttnInd- PwrInd-

RBE+ FLReset-

DevCtl:	Report 

errors: Correctable- Non-Fatal- Fatal-

Unsupported- RlxdOrd-

ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes,

MaxReadReq 4096 bytes

DevSta: CorrErr+

UncorrErr- FatalErr-

UnsuppReq+ AuxPwr+ TransPend-

LnkCap:	Port #0, 

Speed 2.5GT/s,

Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us

ClockPM+

Suprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; RCB 64

bytes

Disabled- Retrain- CommClk+

ExtSynch- ClockPM- AutWidDis-

BWInt- AutBWInt-

LnkSta:	Speed 2.5

GT/s, Width x1, TrErr- Train-

SlotClk+ DLActive- BWMgmt- ABWMgmt-

DevCap2: Completion Timeout: Not

Supported, TimeoutDis+

DevCtl2: Completion Timeout: 50us to 50ms,

TimeoutDis- LnkCtl2:

Target Link Speed: 2.5GT/s, EnterCompliance-

SpeedDis-, Selectable

De-emphasis: -6dB

Transmit Margin: Normal

Operating Range,

EnterModifiedCompliance- ComplianceSOS-

	 Compliance 

De-

emphasis: -6dB

LnkSta2: 

Current De-emphasis Level: -6dB

Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4

Vector table: 

BAR=4

offset=00000000

PBA: BAR=4 offset=00000800

Capabilities: [cc] Vital

Product Data

<?>

Capabilities: [100]

Advanced Error Reporting

UESta:	

DLP-

SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-

UnsupReq- ACSVoil-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-

UnxCmplt- RxOF-

MalfTLP- ECRC- UnsupReq- ACSVoil-

UESvrt: DLP+ SDES+

TLP- FCP+

CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq-

ACSVoil-

CESta:	RxErr- BadTLP- 

BadDLLP- Rollover- Timeout-

NonFatalErr+

CESta:	RxErr- BadTLP- 

BadDLLP- Rollover- Timeout-

NonFatalErr+

AERCap:	First Error 

Pointer: 00, GenCap+ CGenEn- ChkCap+

ChkEn- Capabilities: [140]

Virtual Channel <?>

Capabilities: [160]

Device Serial Number 00-

00-00-00-00-00-00-00

Kernel driver in use:

r8169

Risparmia con Tutto Incluso Light: telefono + adsl 8 mega a soli 14,95 € al mese.

Gratis la Sim Tiscali Mobile con 25 euro di traffico!

L'offerta è

valida solo se attivi entro il 20/05/10

http:

//abbonati.tiscali. it/telefono-adsl/prodotti/tc/tuttoincluso_light/?WT. mc_id=01fw

_______________________________________________ Alsa- devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa- project. org/mailman/listinfo/alsa-devel

Trova Casa sul portale immobiliare n°1 in Italia

http://tiscali.casa.it

Trova Casa sul portale immobiliare n°1 in Italia

http://tiscali.casa.it