[PATCH AUTOSEL 4.4 1/8] ALSA: hda: Don't release card at firmware loading error
From: Takashi Iwai tiwai@suse.de
[ Upstream commit 25faa4bd37c10f19e4b848b9032a17a3d44c6f09 ]
At the error path of the firmware loading error, the driver tries to release the card object and set NULL to drvdata. This may be referred badly at the possible PM action, as the driver itself is still bound and the PM callbacks read the card object.
Instead, we continue the probing as if it were no option set. This is often a better choice than the forced abort, too.
Fixes: 5cb543dba986 ("ALSA: hda - Deferred probing with request_firmware_nowait()") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043 Link: https://lore.kernel.org/r/20200413082034.25166-2-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/hda_intel.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 3e3277100f08a..0fa0c33660087 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1839,24 +1839,15 @@ static void azx_firmware_cb(const struct firmware *fw, void *context) { struct snd_card *card = context; struct azx *chip = card->private_data; - struct pci_dev *pci = chip->pci; - - if (!fw) { - dev_err(card->dev, "Cannot load firmware, aborting\n"); - goto error; - }
- chip->fw = fw; + if (fw) + chip->fw = fw; + else + dev_err(card->dev, "Cannot load firmware, continue without patching\n"); if (!chip->disabled) { /* continue probing */ - if (azx_probe_continue(chip)) - goto error; + azx_probe_continue(chip); } - return; /* OK */ - - error: - snd_card_free(card); - pci_set_drvdata(pci, NULL); } #endif
From: Takashi Iwai tiwai@suse.de
[ Upstream commit 9479e75fca370a5220784f7596bf598c4dad0b9b ]
Currently, when the HD-audio controller driver doesn't detect any codecs, it tries to abort the probe. But this abort happens at the delayed probe, i.e. the primary probe call already returned success, hence the driver is never unbound until user does so explicitly. As a result, it may leave the HD-audio device in the running state without the runtime PM. More badly, if the device is a HD-audio bus that is tied with a GPU, GPU cannot reach to the full power down and consumes unnecessarily much power.
This patch changes the logic after no-codec situation; it continues probing without the further codec initialization but keep the controller driver running normally.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043 Tested-by: Roy Spliet nouveau@spliet.org Link: https://lore.kernel.org/r/20200413082034.25166-5-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/hda_intel.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 0fa0c33660087..8bcf67fe84eb5 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1817,7 +1817,7 @@ static int azx_first_init(struct azx *chip) /* codec detection */ if (!azx_bus(chip)->codec_mask) { dev_err(card->dev, "no codecs found!\n"); - return -ENODEV; + /* keep running the rest for the runtime PM */ }
if (azx_acquire_irq(chip, 0) < 0) @@ -2140,9 +2140,11 @@ static int azx_probe_continue(struct azx *chip) #endif
/* create codec instances */ - err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]); - if (err < 0) - goto out_free; + if (bus->codec_mask) { + err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]); + if (err < 0) + goto out_free; + }
#ifdef CONFIG_SND_HDA_PATCH_LOADER if (chip->fw) { @@ -2156,7 +2158,7 @@ static int azx_probe_continue(struct azx *chip) #endif } #endif - if ((probe_only[dev] & 1) == 0) { + if (bus->codec_mask && !(probe_only[dev] & 1)) { err = azx_codec_configure(chip); if (err < 0) goto out_free;
participants (1)
-
Sasha Levin