[PATCH 1/2] dt-bindings: tas2562: Remove tas2562 text file
Remove the tas2562 text file as the tas2562.yaml is now available.
Signed-off-by: Dan Murphy dmurphy@ti.com --- .../devicetree/bindings/sound/tas2562.txt | 37 ------------------- 1 file changed, 37 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/tas2562.txt
diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt deleted file mode 100644 index dc6d7362ded7..000000000000 --- a/Documentation/devicetree/bindings/sound/tas2562.txt +++ /dev/null @@ -1,37 +0,0 @@ -Texas Instruments TAS2562 Smart PA - -The TAS2562 is a mono, digital input Class-D audio amplifier optimized for -efficiently driving high peak power into small loudspeakers. -Integrated speaker voltage and current sense provides for -real time monitoring of loudspeaker behavior. - -Required properties: - - #address-cells - Should be <1>. - - #size-cells - Should be <0>. - - compatible: - Should contain "ti,tas2562", "ti,tas2563". - - reg: - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f. - - ti,imon-slot-no:- TDM TX current sense time slot. - - ti,vmon-slot-no:- TDM TX voltage sense time slot. This slot must always be - greater then ti,imon-slot-no. - -Optional properties: -- interrupt-parent: phandle to the interrupt controller which provides - the interrupt. -- interrupts: (GPIO) interrupt to which the chip is connected. -- shut-down-gpio: GPIO used to control the state of the device. - -Examples: -tas2562@4c { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,tas2562"; - reg = <0x4c>; - - interrupt-parent = <&gpio1>; - interrupts = <14>; - - shut-down-gpio = <&gpio1 15 0>; - ti,imon-slot-no = <0>; - ti,vmon-slot-no = <1>; -}; -
Add device specification links for the TAS2562 and TAS2563.
Signed-off-by: Dan Murphy dmurphy@ti.com --- Documentation/devicetree/bindings/sound/tas2562.yaml | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index 8d75a798740b..c3b7e19a0d44 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -16,6 +16,10 @@ description: | Integrated speaker voltage and current sense provides for real time monitoring of loudspeaker behavior.
+ Specifications about the audio amplifier can be found at: + https://www.ti.com/lit/gpn/tas2562 + https://www.ti.com/lit/gpn/tas2563 + properties: compatible: enum:
On Mon, 17 Aug 2020 12:21:50 -0500, Dan Murphy wrote:
Remove the tas2562 text file as the tas2562.yaml is now available.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/2] dt-bindings: tas2562: Remove tas2562 text file commit: b1e78c9fcca83d3666bc149ba8ecc1e472759359 [2/2] dt-bindings: tas2562: Add device specification links commit: da9afe50ae2aac72d1b213d028d4e865c7ea9ba3
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (2)
-
Dan Murphy
-
Mark Brown