From: Sascha Hauer s.hauer@pengutronix.de

in fsl_ssi_set_bclk we are looking for the best divider by iterating over all possible dividers. The divider is in the range 1..256, so make this clear by using 'div' as name for the loop counter and iterate from 1 to 256 instead of 0 to 255. This makes obvious that tmprate is calculated wrong, it has to be freq * factor * div, not freq * factor * (i + 2).

Signed-off-by: Sascha Hauer s.hauer@pengutronix.de Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de --- sound/soc/fsl/fsl_ssi.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index b9fabbf69db6..b8af08e49085 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -578,7 +578,7 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai); struct regmap *regs = ssi_private->regs; int synchronous = ssi_private->cpu_dai_drv.symmetric_rates, ret; - u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i; + u32 pm = 999, div2, psr, stccr, mask, afreq, factor, div; unsigned long clkrate, baudrate, tmprate; u64 sub, savesub = 100000; unsigned int freq; @@ -602,8 +602,8 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,

factor = (div2 + 1) * (7 * psr + 1) * 2;

- for (i = 0; i < 255; i++) { - tmprate = freq * factor * (i + 2); + for (div = 1; div < 256; div++) { + tmprate = freq * factor * div;

if (baudclk_is_used) clkrate = clk_get_rate(ssi_private->baudclk); @@ -618,7 +618,7 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, continue;

clkrate /= factor; - afreq = clkrate / (i + 1); + afreq = clkrate / div;

if (freq == afreq) sub = 0; @@ -636,7 +636,7 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, if (sub < savesub) { baudrate = tmprate; savesub = sub; - pm = i; + pm = div - 1; }

/* We are lucky */