Use snd_pcm_rate_to_rate_bit() helper provided by Alsa instead re-implementing it. This reduce code duplication and helps when changing some Alsa definition is necessary. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- sound/usb/caiaq/audio.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c index 4981753652a7..e62a4ea1d19c 100644 --- a/sound/usb/caiaq/audio.c +++ b/sound/usb/caiaq/audio.c @@ -174,14 +174,6 @@ static int snd_usb_caiaq_pcm_hw_free(struct snd_pcm_substream *sub) return 0; } -/* this should probably go upstream */ -#if SNDRV_PCM_RATE_5512 != 1 << 0 || SNDRV_PCM_RATE_192000 != 1 << 12 -#error "Change this table" -#endif - -static const unsigned int rates[] = { 5512, 8000, 11025, 16000, 22050, 32000, 44100, - 48000, 64000, 88200, 96000, 176400, 192000 }; - static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream) { int bytes_per_sample, bpp, ret, i; @@ -233,10 +225,7 @@ static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream) /* the first client that opens a stream defines the sample rate * setting for all subsequent calls, until the last client closed. */ - for (i=0; i < ARRAY_SIZE(rates); i++) - if (runtime->rate == rates[i]) - cdev->pcm_info.rates = 1 << i; - + cdev->pcm_info.rates = snd_pcm_rate_to_rate_bit(runtime->rate); snd_pcm_limit_hw_rates(runtime); bytes_per_sample = BYTES_PER_SAMPLE; -- 2.43.0