Create devices for the MSP-blocks (MSP0, MSP1, MSP2 and MSP3) and associate it with the correct clocks in the clock-framework.

Signed-off-by: Ola Lilja ola.o.lilja@stericsson.com --- arch/arm/mach-ux500/Makefile | 3 +- arch/arm/mach-ux500/board-mop500-msp.c | 250 ++++++++++++++++++++++++++++++++ arch/arm/mach-ux500/board-mop500-msp.h | 14 ++ arch/arm/mach-ux500/board-mop500.c | 4 + arch/arm/mach-ux500/clock.c | 8 +- arch/arm/mach-ux500/devices-db8500.h | 10 -- arch/arm/mach-ux500/include/mach/msp.h | 29 ++++ 7 files changed, 304 insertions(+), 14 deletions(-) create mode 100644 arch/arm/mach-ux500/board-mop500-msp.c create mode 100644 arch/arm/mach-ux500/board-mop500-msp.h create mode 100644 arch/arm/mach-ux500/include/mach/msp.h

diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 465b9ec..11729bc 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -11,7 +11,8 @@ obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ board-mop500-regulators.o \ board-mop500-uib.o board-mop500-stuib.o \ board-mop500-u8500uib.o \ - board-mop500-pins.o + board-mop500-pins.o \ + board-mop500-msp.o obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c new file mode 100644 index 0000000..c8f6300 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -0,0 +1,250 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <plat/gpio-nomadik.h> + +#include <plat/pincfg.h> +#include <plat/ste_dma40.h> + +#include <mach/devices.h> +#include <ste-dma40-db8500.h> +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/msp.h> + +#include "board-mop500.h" +#include "devices-db8500.h" +#include "pins-db8500.h" + +/* MSP1/3 Tx/Rx usage protection */ +static DEFINE_SPINLOCK(msp_rxtx_lock); + +/* Reference Count */ +static int msp_rxtx_ref; + +static pin_cfg_t mop500_msp1_pins_init[] = { + GPIO33_MSP1_TXD | PIN_OUTPUT_LOW | PIN_SLPM_WAKEUP_DISABLE, + GPIO34_MSP1_TFS | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE, + GPIO35_MSP1_TCK | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE, + GPIO36_MSP1_RXD | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE, +}; + +static pin_cfg_t mop500_msp1_pins_exit[] = { + GPIO33_MSP1_TXD | PIN_OUTPUT_LOW | PIN_SLPM_WAKEUP_ENABLE, + GPIO34_MSP1_TFS | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE, + GPIO35_MSP1_TCK | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE, + GPIO36_MSP1_RXD | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE, +}; + +int msp13_i2s_init(void) +{ + int retval = 0; + unsigned long flags; + + spin_lock_irqsave(&msp_rxtx_lock, flags); + if (msp_rxtx_ref == 0) + retval = nmk_config_pins( + ARRAY_AND_SIZE(mop500_msp1_pins_init)); + if (!retval) + msp_rxtx_ref++; + spin_unlock_irqrestore(&msp_rxtx_lock, flags); + + return retval; +} + +int msp13_i2s_exit(void) +{ + int retval = 0; + unsigned long flags; + + spin_lock_irqsave(&msp_rxtx_lock, flags); + WARN_ON(!msp_rxtx_ref); + msp_rxtx_ref--; + if (msp_rxtx_ref == 0) + retval = nmk_config_pins_sleep( + ARRAY_AND_SIZE(mop500_msp1_pins_exit)); + spin_unlock_irqrestore(&msp_rxtx_lock, flags); + + return retval; +} + +static struct stedma40_chan_cfg msp0_dma_rx = { + .high_priority = true, + .dir = STEDMA40_PERIPH_TO_MEM, + + .src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +static struct stedma40_chan_cfg msp0_dma_tx = { + .high_priority = true, + .dir = STEDMA40_MEM_TO_PERIPH, + + .src_dev_type = STEDMA40_DEV_DST_MEMORY, + .dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +static struct msp_i2s_platform_data msp0_platform_data = { + .id = MSP_I2S_0, + .msp_i2s_dma_rx = &msp0_dma_rx, + .msp_i2s_dma_tx = &msp0_dma_tx, +}; + +static struct stedma40_chan_cfg msp1_dma_rx = { + .high_priority = true, + .dir = STEDMA40_PERIPH_TO_MEM, + + .src_dev_type = DB8500_DMA_DEV30_MSP3_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +static struct stedma40_chan_cfg msp1_dma_tx = { + .high_priority = true, + .dir = STEDMA40_MEM_TO_PERIPH, + + .src_dev_type = STEDMA40_DEV_DST_MEMORY, + .dst_dev_type = DB8500_DMA_DEV30_MSP1_TX, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +static struct msp_i2s_platform_data msp1_platform_data = { + .id = MSP_I2S_1, + .msp_i2s_dma_rx = NULL, + .msp_i2s_dma_tx = &msp1_dma_tx, + .msp_i2s_init = msp13_i2s_init, + .msp_i2s_exit = msp13_i2s_exit, +}; + +static struct stedma40_chan_cfg msp2_dma_rx = { + .high_priority = true, + .dir = STEDMA40_PERIPH_TO_MEM, + + .src_dev_type = DB8500_DMA_DEV14_MSP2_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + + /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */ + .src_info.psize = STEDMA40_PSIZE_LOG_1, + .dst_info.psize = STEDMA40_PSIZE_LOG_1, + + /* data_width is set during configuration */ +}; + +static struct stedma40_chan_cfg msp2_dma_tx = { + .high_priority = true, + .dir = STEDMA40_MEM_TO_PERIPH, + + .src_dev_type = STEDMA40_DEV_DST_MEMORY, + .dst_dev_type = DB8500_DMA_DEV14_MSP2_TX, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + .use_fixed_channel = true, + .phy_channel = 1, + + /* data_width is set during configuration */ +}; + +static int db8500_add_msp_i2s(struct device *parent, int id, + resource_size_t base, int irq, + struct msp_i2s_platform_data *pdata) +{ + struct platform_device *pdev; + struct resource res[] = { + DEFINE_RES_MEM(base, SZ_4K), + DEFINE_RES_IRQ(irq), + }; + + pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n", + id, irq); + pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); + if (!pdev) { + pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n", + id); + return -EIO; + } + + return 0; +} + +/* Platform device for ASoC U8500 machine */ +static struct platform_device snd_soc_u8500 = { + .name = "snd-soc-u8500", + .id = 0, + .dev = { + .platform_data = NULL, + }, +}; + +/* Platform device for Ux500-PCM */ +static struct platform_device ux500_pcm = { + .name = "ux500-pcm", + .id = 0, + .dev = { + .platform_data = NULL, + }, +}; + +static struct msp_i2s_platform_data msp2_platform_data = { + .id = MSP_I2S_2, + .msp_i2s_dma_rx = &msp2_dma_rx, + .msp_i2s_dma_tx = &msp2_dma_tx, +}; + +static struct msp_i2s_platform_data msp3_platform_data = { + .id = MSP_I2S_3, + .msp_i2s_dma_rx = &msp1_dma_rx, + .msp_i2s_dma_tx = NULL, + .msp_i2s_init = msp13_i2s_init, + .msp_i2s_exit = msp13_i2s_exit, +}; + +int mop500_msp_init(struct device *parent) +{ + int ret; + + pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); + platform_device_register(&snd_soc_u8500); + + pr_info("Initialize MSP I2S-devices.\n"); + ret = db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, + &msp0_platform_data); + ret |= db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, + &msp1_platform_data); + ret |= db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, + &msp2_platform_data); + ret |= db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, + &msp3_platform_data); + + pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); + platform_device_register(&ux500_pcm); + + return ret; +} diff --git a/arch/arm/mach-ux500/board-mop500-msp.h b/arch/arm/mach-ux500/board-mop500-msp.h new file mode 100644 index 0000000..6fcfb5e --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-msp.h @@ -0,0 +1,14 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Author: Ola Lilja ola.o.lilja@stericsson.com, + * for ST-Ericsson. + * + * License terms: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +void mop500_msp_init(struct device *parent); diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 9dfaab3..4cbed08 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -53,6 +53,7 @@ #include "devices-db8500.h" #include "board-mop500.h" #include "board-mop500-regulators.h" +#include "board-mop500-msp.h"

static struct gpio_led snowball_led_array[] = { { @@ -631,6 +632,7 @@ static void __init mop500_init_machine(void) mop500_i2c_init(parent); mop500_sdi_init(parent); mop500_spi_init(parent); + mop500_msp_init(parent); mop500_uart_init(parent);

i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); @@ -662,6 +664,7 @@ static void __init snowball_init_machine(void) mop500_i2c_init(parent); snowball_sdi_init(parent); mop500_spi_init(parent); + mop500_msp_init(parent); mop500_uart_init(parent);

i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); @@ -699,6 +702,7 @@ static void __init hrefv60_init_machine(void) mop500_i2c_init(parent); hrefv60_sdi_init(parent); mop500_spi_init(parent); + mop500_msp_init(parent); mop500_uart_init(parent);

i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index cc87f77..9c2ffcdf 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -336,6 +336,7 @@ static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */ */

/* Peripheral Cluster #1 */ +static DEFINE_PRCC_CLK(1, msp3, 11, 10, &clk_msp1clk); static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk); static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL); static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk); @@ -405,7 +406,7 @@ static struct clk_lookup u8500_clks[] = { CLK(slimbus0, "slimbus0", NULL), CLK(i2c2, "nmk-i2c.2", NULL), CLK(sdi0, "sdi0", NULL), - CLK(msp0, "msp0", NULL), + CLK(msp0, "ux500-msp-i2s.0", NULL), CLK(i2c1, "nmk-i2c.1", NULL), CLK(uart1, "uart1", NULL), CLK(uart0, "uart0", NULL), @@ -455,7 +456,8 @@ static struct clk_lookup u8500_clks[] = { /* Peripheral Cluster #1 */ CLK(i2c4, "nmk-i2c.4", NULL), CLK(spi3, "spi3", NULL), - CLK(msp1, "msp1", NULL), + CLK(msp1, "ux500-msp-i2s.1", NULL), + CLK(msp3, "ux500-msp-i2s.3", NULL),

/* Peripheral Cluster #2 */ CLK(gpio1, "gpio.6", NULL), @@ -465,7 +467,7 @@ static struct clk_lookup u8500_clks[] = { CLK(spi0, "spi0", NULL), CLK(sdi3, "sdi3", NULL), CLK(sdi1, "sdi1", NULL), - CLK(msp2, "msp2", NULL), + CLK(msp2, "ux500-msp-i2s.2", NULL), CLK(sdi4, "sdi4", NULL), CLK(pwl, "pwl", NULL), CLK(spi1, "spi1", NULL), diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index 9fd93e9..e22b786 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -34,7 +34,6 @@ db8500_add_ssp(struct device *parent, const char *name, resource_size_t base, return dbx500_add_amba_device(parent, name, base, irq, pdata, 0); }

- #define db8500_add_i2c0(parent, pdata) \ dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata) #define db8500_add_i2c1(parent, pdata) \ @@ -46,15 +45,6 @@ db8500_add_ssp(struct device *parent, const char *name, resource_size_t base, #define db8500_add_i2c4(parent, pdata) \ dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)

-#define db8500_add_msp0_i2s(parent, pdata) \ - dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata) -#define db8500_add_msp1_i2s(parent, pdata) \ - dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata) -#define db8500_add_msp2_i2s(parent, pdata) \ - dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata) -#define db8500_add_msp3_i2s(parent, pdata) \ - dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata) - #define db8500_add_msp0_spi(parent, pdata) \ dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \ IRQ_DB8500_MSP0, pdata) diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h new file mode 100644 index 0000000..798be19 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/msp.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent rabin.vincent@stericsson.com for ST-Ericsson + * License terms: GNU General Public License (GPL), version 2. + */ + +#ifndef __MSP_H +#define __MSP_H + +#include <plat/ste_dma40.h> + +enum msp_i2s_id { + MSP_I2S_0 = 0, + MSP_I2S_1, + MSP_I2S_2, + MSP_I2S_3, +}; + +/* Platform data structure for a MSP I2S-device */ +struct msp_i2s_platform_data { + enum msp_i2s_id id; + struct stedma40_chan_cfg *msp_i2s_dma_rx; + struct stedma40_chan_cfg *msp_i2s_dma_tx; + int (*msp_i2s_init) (void); + int (*msp_i2s_exit) (void); +}; + +#endif