From: Jack Yu jack.yu@realtek.com

Add delay to fix pop noise from speaker.

Signed-off-by: Jack Yu jack.yu@realtek.com --- .../devicetree/bindings/sound/rt1015.txt | 6 ++++++ include/sound/rt1015.h | 15 ++++++++++++++ sound/soc/codecs/rt1015.c | 20 +++++++++++++++++++ sound/soc/codecs/rt1015.h | 2 ++ 4 files changed, 43 insertions(+) create mode 100644 include/sound/rt1015.h

diff --git a/Documentation/devicetree/bindings/sound/rt1015.txt b/Documentation/devicetree/bindings/sound/rt1015.txt index fcfd02d8d32f..e498966d436f 100644 --- a/Documentation/devicetree/bindings/sound/rt1015.txt +++ b/Documentation/devicetree/bindings/sound/rt1015.txt @@ -8,10 +8,16 @@ Required properties:

- reg : The I2C address of the device.

+Optional properties: + +- realtek,power-up-delay-ms + Set a delay time for flush work to be completed, + this value is adjustable depending on platform.

Example:

rt1015: codec@28 { compatible = "realtek,rt1015"; reg = <0x28>; + realtek,power-up-delay-ms = <50>; }; diff --git a/include/sound/rt1015.h b/include/sound/rt1015.h new file mode 100644 index 000000000000..70a7538d4c89 --- /dev/null +++ b/include/sound/rt1015.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * linux/sound/rt1015.h -- Platform data for RT1015 + * + * Copyright 2020 Realtek Microelectronics + */ + +#ifndef __LINUX_SND_RT1015_H +#define __LINUX_SND_RT1015_H + +struct rt1015_platform_data { + unsigned int power_up_delay_ms; +}; + +#endif diff --git a/sound/soc/codecs/rt1015.c b/sound/soc/codecs/rt1015.c index 25fe2ddedd54..967193518349 100644 --- a/sound/soc/codecs/rt1015.c +++ b/sound/soc/codecs/rt1015.c @@ -27,10 +27,15 @@ #include <sound/soc-dapm.h> #include <sound/soc.h> #include <sound/tlv.h> +#include <sound/rt1015.h>

#include "rl6231.h" #include "rt1015.h"

+static const struct rt1015_platform_data i2s_default_platform_data = { + .power_up_delay_ms = 50, +}; + static const struct reg_default rt1015_reg[] = { { 0x0000, 0x0000 }, { 0x0004, 0xa000 }, @@ -650,6 +655,7 @@ static int rt1015_amp_drv_event(struct snd_soc_dapm_widget *w, case SND_SOC_DAPM_POST_PMU: if (rt1015->hw_config == RT1015_HW_28) schedule_delayed_work(&rt1015->flush_work, msecs_to_jiffies(10)); + msleep(rt1015->pdata.power_up_delay_ms); break; default: break; @@ -1067,9 +1073,16 @@ static struct acpi_device_id rt1015_acpi_match[] = { MODULE_DEVICE_TABLE(acpi, rt1015_acpi_match); #endif

+static void rt1015_parse_dt(struct rt1015_priv *rt1015, struct device *dev) +{ + device_property_read_u32(dev, "realtek,power-up-delay-ms", + &rt1015->pdata.power_up_delay_ms); +} + static int rt1015_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { + struct rt1015_platform_data *pdata = dev_get_platdata(&i2c->dev); struct rt1015_priv *rt1015; int ret; unsigned int val; @@ -1081,6 +1094,13 @@ static int rt1015_i2c_probe(struct i2c_client *i2c,

i2c_set_clientdata(i2c, rt1015);

+ rt1015->pdata = i2s_default_platform_data; + + if (pdata) + rt1015->pdata = *pdata; + else + rt1015_parse_dt(rt1015, &i2c->dev); + rt1015->regmap = devm_regmap_init_i2c(i2c, &rt1015_regmap); if (IS_ERR(rt1015->regmap)) { ret = PTR_ERR(rt1015->regmap); diff --git a/sound/soc/codecs/rt1015.h b/sound/soc/codecs/rt1015.h index d3fdd30aca6d..15cadb361ec3 100644 --- a/sound/soc/codecs/rt1015.h +++ b/sound/soc/codecs/rt1015.h @@ -12,6 +12,7 @@

#ifndef __RT1015_H__ #define __RT1015_H__ +#include <sound/rt1015.h>

#define RT1015_DEVICE_ID_VAL 0x1011 #define RT1015_DEVICE_ID_VAL2 0x1015 @@ -380,6 +381,7 @@ enum {

struct rt1015_priv { struct snd_soc_component *component; + struct rt1015_platform_data pdata; struct regmap *regmap; int sysclk; int sysclk_src;