[RESEND PATCH v6 0/6] Tegra210 audio graph card
This series adds audio graph based sound card support for Tegra210 platforms like Jetson-TX1 an Jetson-Nano. The following preparatory audio graph enhancement series is already merged. * https://patchwork.kernel.org/project/alsa-devel/list/?series=375629&stat...
Following are the summary of changes: * Add graph/audio-graph based schemas or schema updates for Tegra210 component and machine drivers. * Add Tegra audio graph machine driver. * Add required DT support for Jetson-TX1/Nano.
This work is based on earlier discussion of DPCM usage for Tegra and simple card driver updates. * https://lkml.org/lkml/2020/4/30/519 * https://lkml.org/lkml/2020/6/27/4
Original v6 series was sent about 6-7 weeks back. The dependency commit, https://lore.kernel.org/alsa-devel/1610948585-16286-1-git-send-email-spujar@... is now merged. Resending this now to appear in the top of the mail list.
Changelog =========
v5 -> v6 -------- * Added ports or port description in YAML docs for Tegra AHUB devices and graph card in patch 1/6 and 2/6. Reference of audio-graph-port.yaml is used for AHUB devices. * Dropped redundant NULL check return for of_device_get_match_data() in patch 3/6. * Added 'Reviewed-by' tag from Jon Hunter. * No changes in remaining patches.
v4 -> v5 -------- * Audio graph related changes were sent in separate v5 series as mentioned above and are dropped from current series. * Graph and audio graph doc patches are dropped from this series and are sent separately as mentioned above. * Minor change with phandle label for TX1 and Nano platform DT files. * No changes in other patches.
v3 -> v4 -------- * Added new patches to convert graph.txt and audio-graph-card.txt to corresponding json-schema files. Later these references are used in Tegra audio graph schema.
* AHUB component binding docs are updated to reflect the usage of ports/port/endpoint
* More common stuff is moved into graph_parse_of() and this is used by both generic and Tegra audio graph.
* DT binding for Tegra audio graph is updated to included "ports { }"
* As per the suggestion 'void *data' member is dropped from 'asoc_simple_priv' and instead container method is used to maintain required custom data internal to Tegra audio graph.
v2 -> v3 -------- * Dropped new compatible addition in generic graph driver after reviewing it with Morimoto-san. Instead added Tegra audio graph driver and new compatibles are added in the same. * Added new patches to expose new members for customization in audio graph driver. * Added new patch for Tegra audio graph driver and related documentation. * Minor change in below commit where mutex version of helper is used "ASoC: audio-graph: Identify 'no_pcm' DAI links for DPCM" * DT binding is updated to use the newly exposed compatibles * No changes in other patches
v1 -> v2 -------- * Re-organized ports/endpoints description for ADMAIF and XBAR. Updated DT patches accordingly. * After above change, multiple Codec endpoint support is not required and hence dropped for now. This will be considered separately if at all required in future. * Re-ordered patches in the series.
Sameer Pujar (6): ASoC: dt-bindings: tegra: Add graph bindings ASoC: dt-bindings: tegra: Add json-schema for Tegra audio graph card ASoC: tegra: Add audio graph based card driver arm64: defconfig: Enable Tegra audio graph card driver arm64: tegra: Audio graph header for Tegra210 arm64: tegra: Audio graph sound card for Jetson Nano and TX1
.../sound/nvidia,tegra-audio-graph-card.yaml | 187 +++++++++++++++ .../bindings/sound/nvidia,tegra186-dspk.yaml | 18 +- .../bindings/sound/nvidia,tegra210-admaif.yaml | 13 +- .../bindings/sound/nvidia,tegra210-ahub.yaml | 13 +- .../bindings/sound/nvidia,tegra210-dmic.yaml | 18 +- .../bindings/sound/nvidia,tegra210-i2s.yaml | 18 +- .../boot/dts/nvidia/tegra210-audio-graph.dtsi | 153 ++++++++++++ arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 262 +++++++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 146 ++++++++++++ arch/arm64/configs/defconfig | 1 + sound/soc/tegra/Kconfig | 9 + sound/soc/tegra/Makefile | 2 + sound/soc/tegra/tegra_audio_graph_card.c | 251 ++++++++++++++++++++ 13 files changed, 1085 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi create mode 100644 sound/soc/tegra/tegra_audio_graph_card.c
Add device tree binding properties of generic graph to ASoC component devices. This allows to define audio ports out of these components or DAIs and audio graph based sound card can be realised with this.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com --- .../bindings/sound/nvidia,tegra186-dspk.yaml | 18 +++++++++++++++++- .../bindings/sound/nvidia,tegra210-admaif.yaml | 13 ++++++++++++- .../bindings/sound/nvidia,tegra210-ahub.yaml | 13 +++++++++++-- .../bindings/sound/nvidia,tegra210-dmic.yaml | 18 +++++++++++++++++- .../devicetree/bindings/sound/nvidia,tegra210-i2s.yaml | 18 +++++++++++++++++- 5 files changed, 74 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml index ed2fb32..b8645d9 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml @@ -17,6 +17,9 @@ maintainers: - Jon Hunter jonathanh@nvidia.com - Sameer Pujar spujar@nvidia.com
+allOf: + - $ref: audio-graph-port.yaml# + properties: $nodename: pattern: "^dspk@[0-9a-f]*$" @@ -55,6 +58,19 @@ properties: The name can be "DSPK1" or "DSPKx", where x depends on the maximum available instances on a Tegra SoC.
+ ports: + type: object + properties: + port@0: + description: | + DSPK ACIF (Audio Client Interface) port connected to the + corresponding AHUB (Audio Hub) ACIF port. + + port@1: + description: | + DSPK DAP (Digital Audio Port) interface which can be connected + to external audio codec for playback. + required: - compatible - reg @@ -64,7 +80,7 @@ required: - assigned-clock-parents - sound-name-prefix
-additionalProperties: false +unevaluatedProperties: false
examples: - | diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml index c028b25..7cee772 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml @@ -17,6 +17,9 @@ maintainers: - Jon Hunter jonathanh@nvidia.com - Sameer Pujar spujar@nvidia.com
+allOf: + - $ref: audio-graph-port.yaml# + properties: $nodename: pattern: "^admaif@[0-9a-f]*$" @@ -37,6 +40,14 @@ properties:
dma-names: true
+ ports: + description: | + Contains list of ACIF (Audio CIF) port nodes for ADMAIF channels. + The number of port nodes depends on the number of ADMAIF channels + that SoC may have. These are interfaced with respective ACIF ports + in AHUB (Audio Hub). Each port is capable of data transfers in + both directions. + if: properties: compatible: @@ -81,7 +92,7 @@ required: - dmas - dma-names
-additionalProperties: false +unevaluatedProperties: false
examples: - | diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml index d772197..31f3e51 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml @@ -17,6 +17,9 @@ maintainers: - Jon Hunter jonathanh@nvidia.com - Sameer Pujar spujar@nvidia.com
+allOf: + - $ref: audio-graph-port.yaml# + properties: $nodename: pattern: "^ahub@[0-9a-f]*$" @@ -56,6 +59,13 @@ properties:
ranges: true
+ ports: + description: | + Contains list of ACIF (Audio CIF) port nodes for AHUB (Audio Hub). + These are connected to ACIF interfaces of AHUB clients. Thus the + number of port nodes depend on the number of clients that AHUB may + have depending on the SoC revision. + required: - compatible - reg @@ -67,8 +77,7 @@ required: - "#size-cells" - ranges
-additionalProperties: - type: object +unevaluatedProperties: false
examples: - | diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml index 2a3207b..89f4f47 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml @@ -16,6 +16,9 @@ maintainers: - Jon Hunter jonathanh@nvidia.com - Sameer Pujar spujar@nvidia.com
+allOf: + - $ref: audio-graph-port.yaml# + properties: $nodename: pattern: "^dmic@[0-9a-f]*$" @@ -56,6 +59,19 @@ properties: The name can be "DMIC1" or "DMIC2" ... "DMICx", where x depends on the maximum available instances on a Tegra SoC.
+ ports: + type: object + properties: + port@0: + description: | + DMIC ACIF (Audio Client Interface) port connected to the + corresponding AHUB (Audio Hub) ACIF port. + + port@1: + description: | + DMIC DAP (Digital Audio Port) interface which can be connected + to external audio codec for capture. + required: - compatible - reg @@ -64,7 +80,7 @@ required: - assigned-clocks - assigned-clock-parents
-additionalProperties: false +unevaluatedProperties: false
examples: - | diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml index dfc1bf7..5564603 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml @@ -16,6 +16,9 @@ maintainers: - Jon Hunter jonathanh@nvidia.com - Sameer Pujar spujar@nvidia.com
+allOf: + - $ref: audio-graph-port.yaml# + properties: $nodename: pattern: "^i2s@[0-9a-f]*$" @@ -74,6 +77,19 @@ properties: The name can be "I2S1" or "I2S2" ... "I2Sx", where x depends on the maximum available instances on a Tegra SoC.
+ ports: + type: object + properties: + port@0: + description: | + I2S ACIF (Audio Client Interface) port connected to the + corresponding AHUB (Audio Hub) ACIF port. + + port@1: + description: | + I2S DAP (Digital Audio Port) interface which can be connected + to external audio codec for playback or capture. + required: - compatible - reg @@ -82,7 +98,7 @@ required: - assigned-clocks - assigned-clock-parents
-additionalProperties: false +unevaluatedProperties: false
examples: - |
Add YAML schema for Tegra audio graph sound card DT bindings. It uses the same DT bindings provided by generic audio graph driver. Along with this few standard clock DT bindings are added which are specifically required for Tegra audio.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com --- .../sound/nvidia,tegra-audio-graph-card.yaml | 187 +++++++++++++++++++++ 1 file changed, 187 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml new file mode 100644 index 0000000..fc271f6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml @@ -0,0 +1,187 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-graph-card.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Audio Graph based Tegra sound card driver + +description: | + This is based on generic audio graph card driver along with additional + customizations for Tegra platforms. It uses the same bindings with + additional standard clock DT bindings required for Tegra. + +maintainers: + - Jon Hunter jonathanh@nvidia.com + - Sameer Pujar spujar@nvidia.com + +allOf: + - $ref: audio-graph.yaml# + +properties: + compatible: + enum: + - nvidia,tegra210-audio-graph-card + - nvidia,tegra186-audio-graph-card + + clocks: + minItems: 2 + + clock-names: + minItems: 2 + items: + - const: pll_a + - const: plla_out0 + + assigned-clocks: + minItems: 1 + maxItems: 3 + + assigned-clock-parents: + minItems: 1 + maxItems: 3 + + assigned-clock-rates: + minItems: 1 + maxItems: 3 + +required: + - clocks + - clock-names + - assigned-clocks + - assigned-clock-parents + +unevaluatedProperties: false + +examples: + - | + #include<dt-bindings/clock/tegra210-car.h> + + tegra_sound { + compatible = "nvidia,tegra210-audio-graph-card"; + + clocks = <&tegra_car TEGRA210_CLK_PLL_A>, + <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + clock-names = "pll_a", "plla_out0"; + + assigned-clocks = <&tegra_car TEGRA210_CLK_PLL_A>, + <&tegra_car TEGRA210_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA210_CLK_EXTERN1>; + assigned-clock-parents = <0>, <0>, <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <368640000>, <49152000>, <12288000>; + + dais = /* FE */ + <&admaif1_port>, + /* Router */ + <&xbar_i2s1_port>, + /* I/O DAP Ports */ + <&i2s1_port>; + + label = "jetson-tx1-ape"; + }; + + // The ports are defined for AHUB and its child devices. + ahub@702d0800 { + compatible = "nvidia,tegra210-ahub"; + reg = <0x702d0800 0x800>; + clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>; + clock-names = "ahub"; + assigned-clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x702d0000 0x702d0000 0x0000e400>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + + // ... + + xbar_i2s1_port: port@a { + reg = <0xa>; + xbar_i2s1_ep: endpoint { + remote-endpoint = <&i2s1_cif_ep>; + }; + }; + }; + + admaif@702d0000 { + compatible = "nvidia,tegra210-admaif"; + reg = <0x702d0000 0x800>; + dmas = <&adma 1>, <&adma 1>, + <&adma 2>, <&adma 2>, + <&adma 3>, <&adma 3>, + <&adma 4>, <&adma 4>, + <&adma 5>, <&adma 5>, + <&adma 6>, <&adma 6>, + <&adma 7>, <&adma 7>, + <&adma 8>, <&adma 8>, + <&adma 9>, <&adma 9>, + <&adma 10>, <&adma 10>; + dma-names = "rx1", "tx1", + "rx2", "tx2", + "rx3", "tx3", + "rx4", "tx4", + "rx5", "tx5", + "rx6", "tx6", + "rx7", "tx7", + "rx8", "tx8", + "rx9", "tx9", + "rx10", "tx10"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif1_port: port@0 { + reg = <0x0>; + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + // More ADMAIF ports to follow + }; + }; + + i2s@702d1000 { + compatible = "nvidia,tegra210-i2s"; + clocks = <&tegra_car TEGRA210_CLK_I2S0>; + clock-names = "i2s"; + assigned-clocks = <&tegra_car TEGRA210_CLK_I2S0>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <1536000>; + reg = <0x702d1000 0x100>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <0x1>; + + i2s1_dap: endpoint { + dai-format = "i2s"; + }; + }; + }; + }; + }; + +...
Add Tegra audio machine driver which is based on generic audio graph card driver. It re-uses most of the common stuff from audio graph driver and uses the same DT binding. Required Tegra specific customizations are done in the driver and additional DT bindings are required for clock handling.
Details on the customizations done:
- Update PLL rates at runtime: Tegra HW supports multiple sample rates (multiples of 8x and 11.025x) and both of these groups require different PLL rates. Hence there is a requirement to update this at runtime. This is achieved by providing a custom 'snd_soc_ops' and in hw_param() callback PLL rate is updated as per the sample rate.
- Internal structure 'tegra_audio_graph_data' is used to maintain clock handles of PLL.
- The 'force_dpcm' flag is set to use DPCM for all DAI links.
- The 'component_chaining' flag is set to use DPCM with component model.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com --- sound/soc/tegra/Kconfig | 9 ++ sound/soc/tegra/Makefile | 2 + sound/soc/tegra/tegra_audio_graph_card.c | 251 +++++++++++++++++++++++++++++++ 3 files changed, 262 insertions(+) create mode 100644 sound/soc/tegra/tegra_audio_graph_card.c
diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig index a62cc87..6dc83ad 100644 --- a/sound/soc/tegra/Kconfig +++ b/sound/soc/tegra/Kconfig @@ -117,6 +117,15 @@ config SND_SOC_TEGRA210_ADMAIF channel. Buffer size is configurable for each ADMAIIF channel. Say Y or M if you want to add support for Tegra210 ADMAIF module.
+config SND_SOC_TEGRA_AUDIO_GRAPH_CARD + tristate "Audio Graph Card based Tegra driver" + depends on SND_AUDIO_GRAPH_CARD + help + Config to enable Tegra audio machine driver based on generic + audio graph driver. It is a thin driver written to customize + few things for Tegra audio. Most of the code is re-used from + audio graph driver and the same DT bindings are used. + config SND_SOC_TEGRA_RT5640 tristate "SoC Audio support for Tegra boards using an RT5640 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB diff --git a/sound/soc/tegra/Makefile b/sound/soc/tegra/Makefile index 60040a0..b17dd6e 100644 --- a/sound/soc/tegra/Makefile +++ b/sound/soc/tegra/Makefile @@ -38,6 +38,7 @@ snd-soc-tegra-trimslice-objs := trimslice.o snd-soc-tegra-alc5632-objs := tegra_alc5632.o snd-soc-tegra-max98090-objs := tegra_max98090.o snd-soc-tegra-sgtl5000-objs := tegra_sgtl5000.o +snd-soc-tegra-audio-graph-card-objs := tegra_audio_graph_card.o
obj-$(CONFIG_SND_SOC_TEGRA_RT5640) += snd-soc-tegra-rt5640.o obj-$(CONFIG_SND_SOC_TEGRA_RT5677) += snd-soc-tegra-rt5677.o @@ -48,3 +49,4 @@ obj-$(CONFIG_SND_SOC_TEGRA_TRIMSLICE) += snd-soc-tegra-trimslice.o obj-$(CONFIG_SND_SOC_TEGRA_ALC5632) += snd-soc-tegra-alc5632.o obj-$(CONFIG_SND_SOC_TEGRA_MAX98090) += snd-soc-tegra-max98090.o obj-$(CONFIG_SND_SOC_TEGRA_SGTL5000) += snd-soc-tegra-sgtl5000.o +obj-$(CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD) += snd-soc-tegra-audio-graph-card.o diff --git a/sound/soc/tegra/tegra_audio_graph_card.c b/sound/soc/tegra/tegra_audio_graph_card.c new file mode 100644 index 0000000..9e43f16 --- /dev/null +++ b/sound/soc/tegra/tegra_audio_graph_card.c @@ -0,0 +1,251 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// tegra_audio_graph_card.c - Audio Graph based Tegra Machine Driver +// +// Copyright (c) 2020 NVIDIA CORPORATION. All rights reserved. + +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <sound/graph_card.h> +#include <sound/pcm_params.h> + +#define MAX_PLLA_OUT0_DIV 128 + +#define simple_to_tegra_priv(simple) \ + container_of(simple, struct tegra_audio_priv, simple) + +enum srate_type { + /* + * Sample rates multiple of 8000 Hz and below are supported: + * ( 8000, 16000, 32000, 48000, 96000, 192000 Hz ) + */ + x8_RATE, + + /* + * Sample rates multiple of 11025 Hz and below are supported: + * ( 11025, 22050, 44100, 88200, 176400 Hz ) + */ + x11_RATE, + + NUM_RATE_TYPE, +}; + +struct tegra_audio_priv { + struct asoc_simple_priv simple; + struct clk *clk_plla_out0; + struct clk *clk_plla; +}; + +/* Tegra audio chip data */ +struct tegra_audio_cdata { + unsigned int plla_rates[NUM_RATE_TYPE]; + unsigned int plla_out0_rates[NUM_RATE_TYPE]; +}; + +/* Setup PLL clock as per the given sample rate */ +static int tegra_audio_graph_update_pll(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct asoc_simple_priv *simple = snd_soc_card_get_drvdata(rtd->card); + struct tegra_audio_priv *priv = simple_to_tegra_priv(simple); + struct device *dev = rtd->card->dev; + const struct tegra_audio_cdata *data = of_device_get_match_data(dev); + unsigned int plla_rate, plla_out0_rate, bclk; + unsigned int srate = params_rate(params); + int err; + + switch (srate) { + case 11025: + case 22050: + case 44100: + case 88200: + case 176400: + plla_out0_rate = data->plla_out0_rates[x11_RATE]; + plla_rate = data->plla_rates[x11_RATE]; + break; + case 8000: + case 16000: + case 32000: + case 48000: + case 96000: + case 192000: + plla_out0_rate = data->plla_out0_rates[x8_RATE]; + plla_rate = data->plla_rates[x8_RATE]; + break; + default: + dev_err(rtd->card->dev, "Unsupported sample rate %u\n", + srate); + return -EINVAL; + } + + /* + * Below is the clock relation: + * + * PLLA + * | + * |--> PLLA_OUT0 + * | + * |---> I2S modules + * | + * |---> DMIC modules + * | + * |---> DSPK modules + * + * + * Default PLLA_OUT0 rate might be too high when I/O is running + * at minimum PCM configurations. This may result in incorrect + * clock rates and glitchy audio. The maximum divider is 128 + * and any thing higher than that won't work. Thus reduce PLLA_OUT0 + * to work for lower configurations. + * + * This problem is seen for I2S only, as DMIC and DSPK minimum + * clock requirements are under allowed divider limits. + */ + bclk = srate * params_channels(params) * params_width(params); + if (div_u64(plla_out0_rate, bclk) > MAX_PLLA_OUT0_DIV) + plla_out0_rate >>= 1; + + dev_dbg(rtd->card->dev, + "Update clock rates: PLLA(= %u Hz) and PLLA_OUT0(= %u Hz)\n", + plla_rate, plla_out0_rate); + + /* Set PLLA rate */ + err = clk_set_rate(priv->clk_plla, plla_rate); + if (err) { + dev_err(rtd->card->dev, + "Can't set plla rate for %u, err: %d\n", + plla_rate, err); + return err; + } + + /* Set PLLA_OUT0 rate */ + err = clk_set_rate(priv->clk_plla_out0, plla_out0_rate); + if (err) { + dev_err(rtd->card->dev, + "Can't set plla_out0 rate %u, err: %d\n", + plla_out0_rate, err); + return err; + } + + return err; +} + +static int tegra_audio_graph_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + int err; + + /* + * This gets called for each DAI link (FE or BE) when DPCM is used. + * We may not want to update PLLA rate for each call. So PLLA update + * must be restricted to external I/O links (I2S, DMIC or DSPK) since + * they actually depend on it. I/O modules update their clocks in + * hw_param() of their respective component driver and PLLA rate + * update here helps them to derive appropriate rates. + * + * TODO: When more HW accelerators get added (like sample rate + * converter, volume gain controller etc., which don't really + * depend on PLLA) we need a better way to filter here. + */ + if (cpu_dai->driver->ops && rtd->dai_link->no_pcm) { + err = tegra_audio_graph_update_pll(substream, params); + if (err) + return err; + } + + return asoc_simple_hw_params(substream, params); +} + +static const struct snd_soc_ops tegra_audio_graph_ops = { + .startup = asoc_simple_startup, + .shutdown = asoc_simple_shutdown, + .hw_params = tegra_audio_graph_hw_params, +}; + +static int tegra_audio_graph_card_probe(struct snd_soc_card *card) +{ + struct asoc_simple_priv *simple = snd_soc_card_get_drvdata(card); + struct tegra_audio_priv *priv = simple_to_tegra_priv(simple); + + priv->clk_plla = devm_clk_get(card->dev, "pll_a"); + if (IS_ERR(priv->clk_plla)) { + dev_err(card->dev, "Can't retrieve clk pll_a\n"); + return PTR_ERR(priv->clk_plla); + } + + priv->clk_plla_out0 = devm_clk_get(card->dev, "plla_out0"); + if (IS_ERR(priv->clk_plla_out0)) { + dev_err(card->dev, "Can't retrieve clk plla_out0\n"); + return PTR_ERR(priv->clk_plla_out0); + } + + return graph_card_probe(card); +} + +static int tegra_audio_graph_probe(struct platform_device *pdev) +{ + struct tegra_audio_priv *priv; + struct device *dev = &pdev->dev; + struct snd_soc_card *card; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + card = simple_priv_to_card(&priv->simple); + + card->probe = tegra_audio_graph_card_probe; + + /* graph_parse_of() depends on below */ + card->component_chaining = 1; + priv->simple.ops = &tegra_audio_graph_ops; + priv->simple.force_dpcm = 1; + + return graph_parse_of(&priv->simple, dev); +} + +static const struct tegra_audio_cdata tegra210_data = { + /* PLLA */ + .plla_rates[x8_RATE] = 368640000, + .plla_rates[x11_RATE] = 338688000, + /* PLLA_OUT0 */ + .plla_out0_rates[x8_RATE] = 49152000, + .plla_out0_rates[x11_RATE] = 45158400, +}; + +static const struct tegra_audio_cdata tegra186_data = { + /* PLLA */ + .plla_rates[x8_RATE] = 245760000, + .plla_rates[x11_RATE] = 270950400, + /* PLLA_OUT0 */ + .plla_out0_rates[x8_RATE] = 49152000, + .plla_out0_rates[x11_RATE] = 45158400, +}; + +static const struct of_device_id graph_of_tegra_match[] = { + { .compatible = "nvidia,tegra210-audio-graph-card", + .data = &tegra210_data }, + { .compatible = "nvidia,tegra186-audio-graph-card", + .data = &tegra186_data }, + {}, +}; +MODULE_DEVICE_TABLE(of, graph_of_tegra_match); + +static struct platform_driver tegra_audio_graph_card = { + .driver = { + .name = "tegra-audio-graph-card", + .pm = &snd_soc_pm_ops, + .of_match_table = graph_of_tegra_match, + }, + .probe = tegra_audio_graph_probe, +}; +module_platform_driver(tegra_audio_graph_card); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("ASoC Tegra Audio Graph Sound Card"); +MODULE_AUTHOR("Sameer Pujar spujar@nvidia.com");
This commit enables Tegra audio graph card driver which is based on the generic audio-graph card driver. This is intended to be used on platforms based on Tegra210 and later chips.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 1cd0106..62763fc 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -747,6 +747,7 @@ CONFIG_SND_SOC_TEGRA210_DMIC=m CONFIG_SND_SOC_TEGRA210_I2S=m CONFIG_SND_SOC_TEGRA186_DSPK=m CONFIG_SND_SOC_TEGRA210_ADMAIF=m +CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD=m CONFIG_SND_SOC_AK4613=m CONFIG_SND_SOC_ES7134=m CONFIG_SND_SOC_ES7241=m
On Tue, Jan 19, 2021 at 02:58:14PM +0530, Sameer Pujar wrote:
This commit enables Tegra audio graph card driver which is based on the generic audio-graph card driver. This is intended to be used on platforms based on Tegra210 and later chips.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com
arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
Applied, thanks.
Thierry
Expose a header which describes DT bindings required to use audio-graph based sound card. All Tegra210 based platforms can include this header and add platform specific information. Currently, from SoC point of view, all links are exposed for ADMAIF, AHUB, I2S and DMIC components.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com --- .../boot/dts/nvidia/tegra210-audio-graph.dtsi | 153 +++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi new file mode 100644 index 0000000..5c54358 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + tegra_sound { + status = "disabled"; + + clocks = <&tegra_car TEGRA210_CLK_PLL_A>, + <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + clock-names = "pll_a", "plla_out0"; + + assigned-clocks = <&tegra_car TEGRA210_CLK_PLL_A>, + <&tegra_car TEGRA210_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA210_CLK_EXTERN1>; + assigned-clock-parents = <0>, <0>, <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <368640000>, <49152000>, <12288000>; + }; +}; + +&tegra_admaif { + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif1_port: port@0 { + reg = <0>; + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + admaif2_port: port@1 { + reg = <1>; + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + admaif3_port: port@2 { + reg = <2>; + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + admaif4_port: port@3 { + reg = <3>; + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + admaif5_port: port@4 { + reg = <4>; + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + admaif6_port: port@5 { + reg = <5>; + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + admaif7_port: port@6 { + reg = <6>; + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + admaif8_port: port@7 { + reg = <7>; + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + admaif9_port: port@8 { + reg = <8>; + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + admaif10_port: port@9 { + reg = <9>; + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + }; +}; + +&tegra_ahub { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + port@1 { + reg = <0x1>; + xbar_admaif2_ep: endpoint { + remote-endpoint = <&admaif2_ep>; + }; + }; + port@2 { + reg = <0x2>; + xbar_admaif3_ep: endpoint { + remote-endpoint = <&admaif3_ep>; + }; + }; + port@3 { + reg = <0x3>; + xbar_admaif4_ep: endpoint { + remote-endpoint = <&admaif4_ep>; + }; + }; + port@4 { + reg = <0x4>; + xbar_admaif5_ep: endpoint { + remote-endpoint = <&admaif5_ep>; + }; + }; + port@5 { + reg = <0x5>; + xbar_admaif6_ep: endpoint { + remote-endpoint = <&admaif6_ep>; + }; + }; + port@6 { + reg = <0x6>; + xbar_admaif7_ep: endpoint { + remote-endpoint = <&admaif7_ep>; + }; + }; + port@7 { + reg = <0x7>; + xbar_admaif8_ep: endpoint { + remote-endpoint = <&admaif8_ep>; + }; + }; + port@8 { + reg = <0x8>; + xbar_admaif9_ep: endpoint { + remote-endpoint = <&admaif9_ep>; + }; + }; + port@9 { + reg = <0x9>; + xbar_admaif10_ep: endpoint { + remote-endpoint = <&admaif10_ep>; + }; + }; + }; +};
On Tue, Jan 19, 2021 at 02:58:15PM +0530, Sameer Pujar wrote:
Expose a header which describes DT bindings required to use audio-graph based sound card. All Tegra210 based platforms can include this header and add platform specific information. Currently, from SoC point of view, all links are exposed for ADMAIF, AHUB, I2S and DMIC components.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com
.../boot/dts/nvidia/tegra210-audio-graph.dtsi | 153 +++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi
I prefer keeping everything in tegra210.dtsi, but I can do that merge when I apply, after the DT bindings have been acked, so no need to resend just because of that.
Thierry
On 1/19/2021 10:45 PM, Thierry Reding wrote:
On Tue, Jan 19, 2021 at 02:58:15PM +0530, Sameer Pujar wrote:
Expose a header which describes DT bindings required to use audio-graph based sound card. All Tegra210 based platforms can include this header and add platform specific information. Currently, from SoC point of view, all links are exposed for ADMAIF, AHUB, I2S and DMIC components.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com
.../boot/dts/nvidia/tegra210-audio-graph.dtsi | 153 +++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi
I prefer keeping everything in tegra210.dtsi, but I can do that merge when I apply, after the DT bindings have been acked, so no need to resend just because of that.
I think this may be fine for Tegra210 based boards. But for Tegra186 and Tegra194, whenever we add support for it, can rely on a common audio-graph dtsi because there is no change w.r.t APE. This can help us to avoid duplication of the bindings. This most likely applies to future chips as well (where Tegra186 audio-graph bindings can be considered as base) when there is no significant change in APE.
On Tue, Jan 19, 2021 at 11:09:32PM +0530, Sameer Pujar wrote:
On 1/19/2021 10:45 PM, Thierry Reding wrote:
On Tue, Jan 19, 2021 at 02:58:15PM +0530, Sameer Pujar wrote:
Expose a header which describes DT bindings required to use audio-graph based sound card. All Tegra210 based platforms can include this header and add platform specific information. Currently, from SoC point of view, all links are exposed for ADMAIF, AHUB, I2S and DMIC components.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com
.../boot/dts/nvidia/tegra210-audio-graph.dtsi | 153 +++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi
I prefer keeping everything in tegra210.dtsi, but I can do that merge when I apply, after the DT bindings have been acked, so no need to resend just because of that.
I think this may be fine for Tegra210 based boards. But for Tegra186 and Tegra194, whenever we add support for it, can rely on a common audio-graph dtsi because there is no change w.r.t APE. This can help us to avoid duplication of the bindings. This most likely applies to future chips as well (where Tegra186 audio-graph bindings can be considered as base) when there is no significant change in APE.
Maybe. Although that argument is somewhat extreme because we already have some of that same duplication throughout the other .dtsi files. By the same argument we could save a bit of duplication by having something like tegra-gpio.dtsi and including that in all the SoC .dtsi files and only update the compatible string, because that's the only significant change.
Duplication isn't a big problem for DTS files because the data is meant to be stable anyway. So once it is in place and doesn't have to change, it really doesn't matter if it comes from an include or it's duplicated.
Thierry
On 1/19/2021 11:27 PM, Thierry Reding wrote:
On Tue, Jan 19, 2021 at 11:09:32PM +0530, Sameer Pujar wrote:
On 1/19/2021 10:45 PM, Thierry Reding wrote:
On Tue, Jan 19, 2021 at 02:58:15PM +0530, Sameer Pujar wrote:
Expose a header which describes DT bindings required to use audio-graph based sound card. All Tegra210 based platforms can include this header and add platform specific information. Currently, from SoC point of view, all links are exposed for ADMAIF, AHUB, I2S and DMIC components.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com
.../boot/dts/nvidia/tegra210-audio-graph.dtsi | 153 +++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi
I prefer keeping everything in tegra210.dtsi, but I can do that merge when I apply, after the DT bindings have been acked, so no need to resend just because of that.
I think this may be fine for Tegra210 based boards. But for Tegra186 and Tegra194, whenever we add support for it, can rely on a common audio-graph dtsi because there is no change w.r.t APE. This can help us to avoid duplication of the bindings. This most likely applies to future chips as well (where Tegra186 audio-graph bindings can be considered as base) when there is no significant change in APE.
Maybe. Although that argument is somewhat extreme because we already have some of that same duplication throughout the other .dtsi files. By the same argument we could save a bit of duplication by having something like tegra-gpio.dtsi and including that in all the SoC .dtsi files and only update the compatible string, because that's the only significant change.
Duplication isn't a big problem for DTS files because the data is meant to be stable anyway. So once it is in place and doesn't have to change, it really doesn't matter if it comes from an include or it's duplicated.
OK, if there is no issue with duplication then fine with me. Thanks.
On Tue, Jan 19, 2021 at 02:58:15PM +0530, Sameer Pujar wrote:
Expose a header which describes DT bindings required to use audio-graph based sound card. All Tegra210 based platforms can include this header and add platform specific information. Currently, from SoC point of view, all links are exposed for ADMAIF, AHUB, I2S and DMIC components.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com
.../boot/dts/nvidia/tegra210-audio-graph.dtsi | 153 +++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi
Applied, thanks.
Thierry
Enable support for audio-graph based sound card on Jetson-Nano and Jetson-TX1. Depending on the platform, required I/O interfaces are enabled.
* Jetson-Nano: Enable I2S3, I2S4, DMIC1 and DMIC2. * Jetson-TX1: Enable all I2S and DMIC interfaces.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com --- arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 262 +++++++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 146 ++++++++++++ 2 files changed, 408 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 69102dc..747ab93 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -3,6 +3,7 @@
#include "tegra210-p2180.dtsi" #include "tegra210-p2597.dtsi" +#include "tegra210-audio-graph.dtsi"
/ { model = "NVIDIA Jetson TX1 Developer Kit"; @@ -127,4 +128,265 @@ status = "okay"; }; }; + + tegra_sound { + status = "okay"; + + compatible = "nvidia,tegra210-audio-graph-card"; + + dais = /* FE */ + <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, + <&admaif7_port>, <&admaif8_port>, <&admaif9_port>, + <&admaif10_port>, + /* Router */ + <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s3_port>, + <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_dmic1_port>, + <&xbar_dmic2_port>, <&xbar_dmic3_port>, + /* I/O DAP Ports */ + <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, + <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>; + + label = "jetson-tx1-ape"; + }; +}; + +&tegra_admaif { + status = "okay"; +}; + +&tegra_ahub { + status = "okay"; + + ports { + xbar_i2s1_port: port@a { + reg = <0xa>; + xbar_i2s1_ep: endpoint { + remote-endpoint = <&i2s1_cif_ep>; + }; + }; + xbar_i2s2_port: port@b { + reg = <0xb>; + xbar_i2s2_ep: endpoint { + remote-endpoint = <&i2s2_cif_ep>; + }; + }; + xbar_i2s3_port: port@c { + reg = <0xc>; + xbar_i2s3_ep: endpoint { + remote-endpoint = <&i2s3_cif_ep>; + }; + }; + xbar_i2s4_port: port@d { + reg = <0xd>; + xbar_i2s4_ep: endpoint { + remote-endpoint = <&i2s4_cif_ep>; + }; + }; + xbar_i2s5_port: port@e { + reg = <0xe>; + xbar_i2s5_ep: endpoint { + remote-endpoint = <&i2s5_cif_ep>; + }; + }; + xbar_dmic1_port: port@f { + reg = <0xf>; + xbar_dmic1_ep: endpoint { + remote-endpoint = <&dmic1_cif_ep>; + }; + }; + xbar_dmic2_port: port@10 { + reg = <0x10>; + xbar_dmic2_ep: endpoint { + remote-endpoint = <&dmic2_cif_ep>; + }; + }; + xbar_dmic3_port: port@11 { + reg = <0x11>; + xbar_dmic3_ep: endpoint { + remote-endpoint = <&dmic3_cif_ep>; + }; + }; + }; +}; + +&tegra_i2s1 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + i2s1_port: port@1 { + reg = <1>; + i2s1_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; +}; + +&tegra_i2s2 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + i2s2_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s2_ep>; + }; + }; + i2s2_port: port@1 { + reg = <1>; + i2s2_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; +}; + +&tegra_i2s3 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + i2s3_port: port@1 { + reg = <1>; + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; +}; + +&tegra_i2s4 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + i2s4_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s4_ep>; + }; + }; + i2s4_port: port@1 { + reg = <1>; + i2s4_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; +}; + +&tegra_i2s5 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + i2s5_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s5_ep>; + }; + }; + i2s5_port: port@1 { + reg = <1>; + i2s5_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; +}; + +&tegra_dmic1 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + dmic1_port: port@1 { + reg = <1>; + dmic1_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; +}; + +&tegra_dmic2 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + dmic2_port: port@1 { + reg = <1>; + dmic2_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; +}; + +&tegra_dmic3 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dmic3_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic3_ep>; + }; + }; + dmic3_port: port@1 { + reg = <1>; + dmic3_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 6a877de..0c917a1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -6,6 +6,7 @@ #include <dt-bindings/mfd/max77620.h>
#include "tegra210.dtsi" +#include "tegra210-audio-graph.dtsi"
/ { model = "NVIDIA Jetson Nano Developer Kit"; @@ -870,4 +871,149 @@
vin-supply = <&vdd_5v0_sys>; }; + + tegra_sound { + status = "okay"; + + compatible = "nvidia,tegra210-audio-graph-card"; + + dais = /* FE */ + <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, + <&admaif7_port>, <&admaif8_port>, <&admaif9_port>, + <&admaif10_port>, + /* Router */ + <&xbar_i2s3_port>, <&xbar_i2s4_port>, + <&xbar_dmic1_port>, <&xbar_dmic2_port>, + /* I/O DAP Ports */ + <&i2s3_port>, <&i2s4_port>, + <&dmic1_port>, <&dmic2_port>; + + label = "jetson-nano-ape"; + }; +}; + +&tegra_admaif { + status = "okay"; +}; + +&tegra_ahub { + status = "okay"; + + ports { + xbar_i2s3_port: port@c { + reg = <0xc>; + xbar_i2s3_ep: endpoint { + remote-endpoint = <&i2s3_cif_ep>; + }; + }; + xbar_i2s4_port: port@d { + reg = <0xd>; + xbar_i2s4_ep: endpoint { + remote-endpoint = <&i2s4_cif_ep>; + }; + }; + xbar_dmic1_port: port@f { + reg = <0xf>; + xbar_dmic1_ep: endpoint { + remote-endpoint = <&dmic1_cif_ep>; + }; + }; + xbar_dmic2_port: port@10 { + reg = <0x10>; + xbar_dmic2_ep: endpoint { + remote-endpoint = <&dmic2_cif_ep>; + }; + }; + }; +}; + +&tegra_i2s3 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + i2s3_port: port@1 { + reg = <1>; + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; +}; + +&tegra_i2s4 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + i2s4_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s4_ep>; + }; + }; + i2s4_port: port@1 { + reg = <1>; + i2s4_dap_ep: endpoint@0 { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; +}; + +&tegra_dmic1 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dmic1_cif_ep: endpoint@0 { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + dmic1_port: port@1 { + reg = <1>; + dmic1_dap_ep: endpoint@0 { + /* Placeholder for external Codec */ + }; + }; + }; +}; + +&tegra_dmic2 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dmic2_cif_ep: endpoint@0 { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + dmic2_port: port@1 { + reg = <1>; + dmic2_dap_ep: endpoint@0 { + /* Placeholder for external Codec */ + }; + }; + }; };
On Tue, Jan 19, 2021 at 02:58:16PM +0530, Sameer Pujar wrote:
Enable support for audio-graph based sound card on Jetson-Nano and Jetson-TX1. Depending on the platform, required I/O interfaces are enabled.
- Jetson-Nano: Enable I2S3, I2S4, DMIC1 and DMIC2.
- Jetson-TX1: Enable all I2S and DMIC interfaces.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com
arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 262 +++++++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 146 ++++++++++++ 2 files changed, 408 insertions(+)
Similarly to patch 5, I'm likely going to make some changes to this when I apply to avoid those label references, since that's not something that we use elsewhere, so I want to keep things consistent.
Again, just mentioning that here, but no need to resend.
Thierry
On Tue, Jan 19, 2021 at 02:58:16PM +0530, Sameer Pujar wrote:
Enable support for audio-graph based sound card on Jetson-Nano and Jetson-TX1. Depending on the platform, required I/O interfaces are enabled.
- Jetson-Nano: Enable I2S3, I2S4, DMIC1 and DMIC2.
- Jetson-TX1: Enable all I2S and DMIC interfaces.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com
arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 262 +++++++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 146 ++++++++++++ 2 files changed, 408 insertions(+)
Applied, thanks.
Thierry
On Tue, 19 Jan 2021 14:58:10 +0530, Sameer Pujar wrote:
This series adds audio graph based sound card support for Tegra210 platforms like Jetson-TX1 an Jetson-Nano. The following preparatory audio graph enhancement series is already merged.
Following are the summary of changes:
- Add graph/audio-graph based schemas or schema updates for Tegra210 component and machine drivers.
- Add Tegra audio graph machine driver.
- Add required DT support for Jetson-TX1/Nano.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/6] ASoC: dt-bindings: tegra: Add graph bindings commit: 9e0f86fdcdab6a0e183ad4ec2410453985b4cf3c [2/6] ASoC: dt-bindings: tegra: Add json-schema for Tegra audio graph card commit: a9f22c03a8ac5d21ce7a9b9307d9654c963a1f9c [3/6] ASoC: tegra: Add audio graph based card driver commit: 202e2f7745437aa5b694de92cbd30bb43b23fbed
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (3)
-
Mark Brown
-
Sameer Pujar
-
Thierry Reding