The WM8510 is a mono CODEC with speaker driver optimised for telephony applications, featuring: - 16/20/24/32 bit audio at data rates between 8kHz and 48kHz - On-chip PLL - Dual microphone inputs

This driver was originally written by Liam Girdwood with updates from Brett Saunders, Geoffrey Wossum and myself.

Signed-off-by: Liam Girdwood lg@opensource.wolfsonmicro.com Signed-off-by: Brett Saunders breton.saunders@ntlworld.com Signed-off-by: Geoffrey Wossum geoffrey@pager.net Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/Kconfig | 3 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wm8510.c | 836 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm8510.h | 103 ++++++ 4 files changed, 944 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/wm8510.c create mode 100644 sound/soc/codecs/wm8510.h

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 7beefcc..ef400b3 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -5,6 +5,9 @@ config SND_SOC_AC97_CODEC config SND_SOC_UDA1380 tristate

+config SND_SOC_WM8510 + tristate + config SND_SOC_WM8731 tristate

diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index d5926a1..b92c665 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -1,5 +1,6 @@ snd-soc-ac97-objs := ac97.o snd-soc-uda1380-objs := uda1380.o +snd-soc-wm8510-objs := wm8510.o snd-soc-wm8731-objs := wm8731.o snd-soc-wm8750-objs := wm8750.o snd-soc-wm8753-objs := wm8753.o @@ -10,6 +11,7 @@ snd-soc-tlv320aic3x-objs := tlv320aic3x.o

obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o obj-$(CONFIG_SND_SOC_UDA1380) += snd-soc-uda1380.o +obj-$(CONFIG_SND_SOC_WM8510) += snd-soc-wm8510.o obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c new file mode 100644 index 0000000..6f54cb0 --- /dev/null +++ b/sound/soc/codecs/wm8510.c @@ -0,0 +1,836 @@ +/* + * wm8510.c -- WM8510 ALSA Soc Audio driver + * + * Copyright 2006 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood liam.girdwood@wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> + +#include "wm8510.h" + +#define AUDIO_NAME "wm8510" +#define WM8510_VERSION "0.6" + +/* + * Debug + */ + +#define WM8510_DEBUG 0 + +#ifdef WM8510_DEBUG +#define dbg(format, arg...) \ + printk(KERN_DEBUG AUDIO_NAME ": " format "\n" , ## arg) +#else +#define dbg(format, arg...) do {} while (0) +#endif +#define err(format, arg...) \ + printk(KERN_ERR AUDIO_NAME ": " format "\n" , ## arg) +#define info(format, arg...) \ + printk(KERN_INFO AUDIO_NAME ": " format "\n" , ## arg) +#define warn(format, arg...) \ + printk(KERN_WARNING AUDIO_NAME ": " format "\n" , ## arg) + +struct snd_soc_codec_device soc_codec_dev_wm8510; + +/* + * wm8510 register cache + * We can't read the WM8510 register space when we are + * using 2 wire for device control, so we cache them instead. + */ +static const u16 wm8510_reg[WM8510_CACHEREGNUM] = { + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0050, 0x0000, 0x0140, 0x0000, + 0x0000, 0x0000, 0x0000, 0x00ff, + 0x0000, 0x0000, 0x0100, 0x00ff, + 0x0000, 0x0000, 0x012c, 0x002c, + 0x002c, 0x002c, 0x002c, 0x0000, + 0x0032, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0038, 0x000b, 0x0032, 0x0000, + 0x0008, 0x000c, 0x0093, 0x00e9, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0003, 0x0010, 0x0000, 0x0000, + 0x0000, 0x0002, 0x0001, 0x0000, + 0x0000, 0x0000, 0x0039, 0x0000, + 0x0000, +}; + +/* + * read wm8510 register cache + */ +static inline unsigned int wm8510_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + if (reg == WM8510_RESET) + return 0; + if (reg >= WM8510_CACHEREGNUM) + return -1; + return cache[reg]; +} + +/* + * write wm8510 register cache + */ +static inline void wm8510_write_reg_cache(struct snd_soc_codec *codec, + u16 reg, unsigned int value) +{ + u16 *cache = codec->reg_cache; + if (reg >= WM8510_CACHEREGNUM) + return; + cache[reg] = value; +} + +/* + * write to the WM8510 register space + */ +static int wm8510_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 data[2]; + + /* data is + * D15..D9 WM8510 register offset + * D8...D0 register data + */ + data[0] = (reg << 1) | ((value >> 8) & 0x0001); + data[1] = value & 0x00ff; + + wm8510_write_reg_cache(codec, reg, value); + if (codec->hw_write(codec->control_data, data, 2) == 2) + return 0; + else + return -EIO; +} + +#define wm8510_reset(c) wm8510_write(c, WM8510_RESET, 0) + +static const char *wm8510_companding[] = { "Off", "NC", "u-law", "A-law" }; +static const char *wm8510_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" }; +static const char *wm8510_alc[] = { "ALC", "Limiter" }; + +static const struct soc_enum wm8510_enum[] = { + SOC_ENUM_SINGLE(WM8510_COMP, 1, 4, wm8510_companding), /* adc */ + SOC_ENUM_SINGLE(WM8510_COMP, 3, 4, wm8510_companding), /* dac */ + SOC_ENUM_SINGLE(WM8510_DAC, 4, 4, wm8510_deemp), + SOC_ENUM_SINGLE(WM8510_ALC3, 8, 2, wm8510_alc), +}; + +static const struct snd_kcontrol_new wm8510_snd_controls[] = { + +SOC_SINGLE("Digital Loopback Switch", WM8510_COMP, 0, 1, 0), + +SOC_ENUM("DAC Companding", wm8510_enum[1]), +SOC_ENUM("ADC Companding", wm8510_enum[0]), + +SOC_ENUM("Playback De-emphasis", wm8510_enum[2]), +SOC_SINGLE("DAC Inversion Switch", WM8510_DAC, 0, 1, 0), + +SOC_SINGLE("Master Playback Volume", WM8510_DACVOL, 0, 127, 0), + +SOC_SINGLE("High Pass Filter Switch", WM8510_ADC, 8, 1, 0), +SOC_SINGLE("High Pass Cut Off", WM8510_ADC, 4, 7, 0), +SOC_SINGLE("ADC Inversion Switch", WM8510_COMP, 0, 1, 0), + +SOC_SINGLE("Capture Volume", WM8510_ADCVOL, 0, 127, 0), + +SOC_SINGLE("DAC Playback Limiter Switch", WM8510_DACLIM1, 8, 1, 0), +SOC_SINGLE("DAC Playback Limiter Decay", WM8510_DACLIM1, 4, 15, 0), +SOC_SINGLE("DAC Playback Limiter Attack", WM8510_DACLIM1, 0, 15, 0), + +SOC_SINGLE("DAC Playback Limiter Threshold", WM8510_DACLIM2, 4, 7, 0), +SOC_SINGLE("DAC Playback Limiter Boost", WM8510_DACLIM2, 0, 15, 0), + +SOC_SINGLE("ALC Enable Switch", WM8510_ALC1, 8, 1, 0), +SOC_SINGLE("ALC Capture Max Gain", WM8510_ALC1, 3, 7, 0), +SOC_SINGLE("ALC Capture Min Gain", WM8510_ALC1, 0, 7, 0), + +SOC_SINGLE("ALC Capture ZC Switch", WM8510_ALC2, 8, 1, 0), +SOC_SINGLE("ALC Capture Hold", WM8510_ALC2, 4, 7, 0), +SOC_SINGLE("ALC Capture Target", WM8510_ALC2, 0, 15, 0), + +SOC_ENUM("ALC Capture Mode", wm8510_enum[3]), +SOC_SINGLE("ALC Capture Decay", WM8510_ALC3, 4, 15, 0), +SOC_SINGLE("ALC Capture Attack", WM8510_ALC3, 0, 15, 0), + +SOC_SINGLE("ALC Capture Noise Gate Switch", WM8510_NGATE, 3, 1, 0), +SOC_SINGLE("ALC Capture Noise Gate Threshold", WM8510_NGATE, 0, 7, 0), + +SOC_SINGLE("Capture PGA ZC Switch", WM8510_INPPGA, 7, 1, 0), +SOC_SINGLE("Capture PGA Volume", WM8510_INPPGA, 0, 63, 0), + +SOC_SINGLE("Speaker Playback ZC Switch", WM8510_SPKVOL, 7, 1, 0), +SOC_SINGLE("Speaker Playback Switch", WM8510_SPKVOL, 6, 1, 1), +SOC_SINGLE("Speaker Playback Volume", WM8510_SPKVOL, 0, 63, 0), +SOC_SINGLE("Speaker Boost", WM8510_OUTPUT, 2, 1, 0), + +SOC_SINGLE("Capture Boost(+20dB)", WM8510_ADCBOOST, 8, 1, 0), +SOC_SINGLE("Mono Playback Switch", WM8510_MONOMIX, 6, 1, 1), +}; + +/* add non dapm controls */ +static int wm8510_add_controls(struct snd_soc_codec *codec) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(wm8510_snd_controls); i++) { + err = snd_ctl_add(codec->card, + snd_soc_cnew(&wm8510_snd_controls[i], codec, + NULL)); + if (err < 0) + return err; + } + + return 0; +} + +/* Speaker Output Mixer */ +static const struct snd_kcontrol_new wm8510_speaker_mixer_controls[] = { +SOC_DAPM_SINGLE("Line Bypass Switch", WM8510_SPKMIX, 1, 1, 0), +SOC_DAPM_SINGLE("Aux Playback Switch", WM8510_SPKMIX, 5, 1, 0), +SOC_DAPM_SINGLE("PCM Playback Switch", WM8510_SPKMIX, 0, 1, 0), +}; + +/* Mono Output Mixer */ +static const struct snd_kcontrol_new wm8510_mono_mixer_controls[] = { +SOC_DAPM_SINGLE("Line Bypass Switch", WM8510_MONOMIX, 1, 1, 0), +SOC_DAPM_SINGLE("Aux Playback Switch", WM8510_MONOMIX, 2, 1, 0), +SOC_DAPM_SINGLE("PCM Playback Switch", WM8510_MONOMIX, 0, 1, 0), +}; + +static const struct snd_kcontrol_new wm8510_boost_controls[] = { +SOC_DAPM_SINGLE("Mic PGA Switch", WM8510_INPPGA, 6, 1, 0), +SOC_DAPM_SINGLE("Aux Volume", WM8510_ADCBOOST, 0, 7, 0), +SOC_DAPM_SINGLE("Mic Volume", WM8510_ADCBOOST, 4, 7, 0), +}; + +static const struct snd_kcontrol_new wm8510_micpga_controls[] = { +SOC_DAPM_SINGLE("MICP Switch", WM8510_INPUT, 0, 1, 0), +SOC_DAPM_SINGLE("MICN Switch", WM8510_INPUT, 1, 1, 0), +SOC_DAPM_SINGLE("AUX Switch", WM8510_INPUT, 2, 1, 0), +}; + +static const struct snd_soc_dapm_widget wm8510_dapm_widgets[] = { +SND_SOC_DAPM_MIXER("Speaker Mixer", WM8510_POWER3, 2, 0, + &wm8510_speaker_mixer_controls[0], + ARRAY_SIZE(wm8510_speaker_mixer_controls)), +SND_SOC_DAPM_MIXER("Mono Mixer", WM8510_POWER3, 3, 0, + &wm8510_mono_mixer_controls[0], + ARRAY_SIZE(wm8510_mono_mixer_controls)), +SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM8510_POWER3, 0, 0), +SND_SOC_DAPM_ADC("ADC", "HiFi Capture", WM8510_POWER2, 0, 0), +SND_SOC_DAPM_PGA("Aux Input", WM8510_POWER1, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA("SpkN Out", WM8510_POWER3, 5, 0, NULL, 0), +SND_SOC_DAPM_PGA("SpkP Out", WM8510_POWER3, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA("Mono Out", WM8510_POWER3, 7, 0, NULL, 0), + +SND_SOC_DAPM_PGA("Mic PGA", WM8510_POWER2, 2, 0, + &wm8510_micpga_controls[0], + ARRAY_SIZE(wm8510_micpga_controls)), +SND_SOC_DAPM_MIXER("Boost Mixer", WM8510_POWER2, 4, 0, + &wm8510_boost_controls[0], + ARRAY_SIZE(wm8510_boost_controls)), + +SND_SOC_DAPM_MICBIAS("Mic Bias", WM8510_POWER1, 4, 0), + +SND_SOC_DAPM_INPUT("MICN"), +SND_SOC_DAPM_INPUT("MICP"), +SND_SOC_DAPM_INPUT("AUX"), +SND_SOC_DAPM_OUTPUT("MONOOUT"), +SND_SOC_DAPM_OUTPUT("SPKOUTP"), +SND_SOC_DAPM_OUTPUT("SPKOUTN"), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + /* Mono output mixer */ + {"Mono Mixer", "PCM Playback Switch", "DAC"}, + {"Mono Mixer", "Aux Playback Switch", "Aux Input"}, + {"Mono Mixer", "Line Bypass Switch", "Boost Mixer"}, + + /* Speaker output mixer */ + {"Speaker Mixer", "PCM Playback Switch", "DAC"}, + {"Speaker Mixer", "Aux Playback Switch", "Aux Input"}, + {"Speaker Mixer", "Line Bypass Switch", "Boost Mixer"}, + + /* Outputs */ + {"Mono Out", NULL, "Mono Mixer"}, + {"MONOOUT", NULL, "Mono Out"}, + {"SpkN Out", NULL, "Speaker Mixer"}, + {"SpkP Out", NULL, "Speaker Mixer"}, + {"SPKOUTN", NULL, "SpkN Out"}, + {"SPKOUTP", NULL, "SpkP Out"}, + + /* Microphone PGA */ + {"Mic PGA", "MICN Switch", "MICN"}, + {"Mic PGA", "MICP Switch", "MICP"}, + { "Mic PGA", "AUX Switch", "Aux Input" }, + + /* Boost Mixer */ + {"Boost Mixer", "Mic PGA Switch", "Mic PGA"}, + {"Boost Mixer", "Mic Volume", "MICP"}, + {"Boost Mixer", "Aux Volume", "Aux Input"}, + + {"ADC", NULL, "Boost Mixer"}, +}; + +static int wm8510_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, wm8510_dapm_widgets, + ARRAY_SIZE(wm8510_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_new_widgets(codec); + return 0; +} + +struct pll_ { + unsigned int pre_div:4; /* prescale - 1 */ + unsigned int n:4; + unsigned int k; +}; + +static struct pll_ pll_div; + +/* The size in bits of the pll divide multiplied by 10 + * to allow rounding later */ +#define FIXED_PLL_SIZE ((1 << 24) * 10) + +static void pll_factors(unsigned int target, unsigned int source) +{ + unsigned long long Kpart; + unsigned int K, Ndiv, Nmod; + + Ndiv = target / source; + if (Ndiv < 6) { + source >>= 1; + pll_div.pre_div = 1; + Ndiv = target / source; + } else + pll_div.pre_div = 0; + + if ((Ndiv < 6) || (Ndiv > 12)) + printk(KERN_WARNING + "WM8510 N value %d outwith recommended range!d\n", + Ndiv); + + pll_div.n = Ndiv; + Nmod = target % source; + Kpart = FIXED_PLL_SIZE * (long long)Nmod; + + do_div(Kpart, source); + + K = Kpart & 0xFFFFFFFF; + + /* Check if we need to round */ + if ((K % 10) >= 5) + K += 5; + + /* Move down to proper range now rounding is done */ + K /= 10; + + pll_div.k = K; +} + +static int wm8510_set_dai_pll(struct snd_soc_codec_dai *codec_dai, + int pll_id, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 reg; + + if (freq_in == 0 || freq_out == 0) { + /* Clock CODEC directly from MCLK */ + reg = wm8510_read_reg_cache(codec, WM8510_CLOCK); + wm8510_write(codec, WM8510_CLOCK, reg & 0x0ff); + + /* Turn off PLL */ + reg = wm8510_read_reg_cache(codec, WM8510_POWER1); + wm8510_write(codec, WM8510_POWER1, reg & 0x1df); + return 0; + } + + pll_factors(freq_out*8, freq_in); + + wm8510_write(codec, WM8510_PLLN, (pll_div.pre_div << 4) | pll_div.n); + wm8510_write(codec, WM8510_PLLK1, pll_div.k >> 18); + wm8510_write(codec, WM8510_PLLK2, (pll_div.k >> 9) & 0x1ff); + wm8510_write(codec, WM8510_PLLK3, pll_div.k & 0x1ff); + reg = wm8510_read_reg_cache(codec, WM8510_POWER1); + wm8510_write(codec, WM8510_POWER1, reg | 0x020); + + /* Run CODEC from PLL instead of MCLK */ + reg = wm8510_read_reg_cache(codec, WM8510_CLOCK); + wm8510_write(codec, WM8510_CLOCK, reg | 0x100); + + return 0; +} + +/* + * Configure WM8510 clock dividers. + */ +static int wm8510_set_dai_clkdiv(struct snd_soc_codec_dai *codec_dai, + int div_id, int div) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 reg; + + switch (div_id) { + case WM8510_OPCLKDIV: + reg = wm8510_read_reg_cache(codec, WM8510_GPIO) & 0x1cf; + wm8510_write(codec, WM8510_GPIO, reg | div); + break; + case WM8510_MCLKDIV: + reg = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x1f; + wm8510_write(codec, WM8510_CLOCK, reg | div); + break; + case WM8510_ADCCLK: + reg = wm8510_read_reg_cache(codec, WM8510_ADC) & 0x1f7; + wm8510_write(codec, WM8510_ADC, reg | div); + break; + case WM8510_DACCLK: + reg = wm8510_read_reg_cache(codec, WM8510_DAC) & 0x1f7; + wm8510_write(codec, WM8510_DAC, reg | div); + break; + case WM8510_BCLKDIV: + reg = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x1e3; + wm8510_write(codec, WM8510_CLOCK, reg | div); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int wm8510_set_dai_fmt(struct snd_soc_codec_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 iface = 0; + u16 clk = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x1fe; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + clk |= 0x0001; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= 0x0010; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + iface |= 0x0008; + break; + case SND_SOC_DAIFMT_DSP_A: + iface |= 0x00018; + break; + default: + return -EINVAL; + } + + /* clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + iface |= 0x0180; + break; + case SND_SOC_DAIFMT_IB_NF: + iface |= 0x0100; + break; + case SND_SOC_DAIFMT_NB_IF: + iface |= 0x0080; + break; + default: + return -EINVAL; + } + + wm8510_write(codec, WM8510_IFACE, iface); + wm8510_write(codec, WM8510_CLOCK, clk); + return 0; +} + +static int wm8510_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + u16 iface = wm8510_read_reg_cache(codec, WM8510_IFACE) & 0x19f; + u16 adn = wm8510_read_reg_cache(codec, WM8510_ADD) & 0x1f1; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface |= 0x0020; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface |= 0x0040; + break; + case SNDRV_PCM_FORMAT_S32_LE: + iface |= 0x0060; + break; + } + + /* filter coefficient */ + switch (params_rate(params)) { + case SNDRV_PCM_RATE_8000: + adn |= 0x5 << 1; + break; + case SNDRV_PCM_RATE_11025: + adn |= 0x4 << 1; + break; + case SNDRV_PCM_RATE_16000: + adn |= 0x3 << 1; + break; + case SNDRV_PCM_RATE_22050: + adn |= 0x2 << 1; + break; + case SNDRV_PCM_RATE_32000: + adn |= 0x1 << 1; + break; + case SNDRV_PCM_RATE_44100: + case SNDRV_PCM_RATE_48000: + break; + } + + wm8510_write(codec, WM8510_IFACE, iface); + wm8510_write(codec, WM8510_ADD, adn); + return 0; +} + +static int wm8510_mute(struct snd_soc_codec_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + u16 mute_reg = wm8510_read_reg_cache(codec, WM8510_DAC) & 0xffbf; + + if (mute) + wm8510_write(codec, WM8510_DAC, mute_reg | 0x40); + else + wm8510_write(codec, WM8510_DAC, mute_reg); + return 0; +} + +/* liam need to make this lower power with dapm */ +static int wm8510_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + + switch (level) { + case SND_SOC_BIAS_ON: + wm8510_write(codec, WM8510_POWER1, 0x1ff); + wm8510_write(codec, WM8510_POWER2, 0x1ff); + wm8510_write(codec, WM8510_POWER3, 0x1ff); + break; + case SND_SOC_BIAS_PREPARE: + case SND_SOC_BIAS_STANDBY: + break; + case SND_SOC_BIAS_OFF: + /* everything off, dac mute, inactive */ + wm8510_write(codec, WM8510_POWER1, 0x0); + wm8510_write(codec, WM8510_POWER2, 0x0); + wm8510_write(codec, WM8510_POWER3, 0x0); + break; + } + codec->bias_level = level; + return 0; +} + +#define WM8510_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000) + +#define WM8510_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_codec_dai wm8510_dai = { + .name = "WM8510 HiFi", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = WM8510_RATES, + .formats = WM8510_FORMATS,}, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = WM8510_RATES, + .formats = WM8510_FORMATS,}, + .ops = { + .hw_params = wm8510_pcm_hw_params, + }, + .dai_ops = { + .digital_mute = wm8510_mute, + .set_fmt = wm8510_set_dai_fmt, + .set_clkdiv = wm8510_set_dai_clkdiv, + .set_pll = wm8510_set_dai_pll, + }, +}; +EXPORT_SYMBOL_GPL(wm8510_dai); + +static int wm8510_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + wm8510_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static int wm8510_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + int i; + u8 data[2]; + u16 *cache = codec->reg_cache; + + /* Sync reg_cache with the hardware */ + for (i = 0; i < ARRAY_SIZE(wm8510_reg); i++) { + data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001); + data[1] = cache[i] & 0x00ff; + codec->hw_write(codec->control_data, data, 2); + } + wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + wm8510_set_bias_level(codec, codec->suspend_bias_level); + return 0; +} + +/* + * initialise the WM8510 driver + * register the mixer and dsp interfaces with the kernel + */ +static int wm8510_init(struct snd_soc_device *socdev) +{ + struct snd_soc_codec *codec = socdev->codec; + int ret = 0; + + codec->name = "WM8510"; + codec->owner = THIS_MODULE; + codec->read = wm8510_read_reg_cache; + codec->write = wm8510_write; + codec->set_bias_level = wm8510_set_bias_level; + codec->dai = &wm8510_dai; + codec->num_dai = 1; + codec->reg_cache_size = ARRAY_SIZE(wm8510_reg); + codec->reg_cache = kmemdup(wm8510_reg, sizeof(wm8510_reg), GFP_KERNEL); + + if (codec->reg_cache == NULL) + return -ENOMEM; + + wm8510_reset(codec); + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + printk(KERN_ERR "wm8510: failed to create pcms\n"); + goto pcm_err; + } + + /* power on device */ + wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + wm8510_add_controls(codec); + wm8510_add_widgets(codec); + ret = snd_soc_register_card(socdev); + if (ret < 0) { + printk(KERN_ERR "wm8510: failed to register card\n"); + goto card_err; + } + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + kfree(codec->reg_cache); + return ret; +} + +static struct snd_soc_device *wm8510_socdev; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + +/* + * WM8510 2 wire address is 0x1a + */ +#define I2C_DRIVERID_WM8510 0xfefe /* liam - need a proper id */ + +static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; + +/* Magic definition of all other variables and things */ +I2C_CLIENT_INSMOD; + +static struct i2c_driver wm8510_i2c_driver; +static struct i2c_client client_template; + +/* If the i2c layer weren't so broken, we could pass this kind of data + around */ + +static int wm8510_codec_probe(struct i2c_adapter *adap, int addr, int kind) +{ + struct snd_soc_device *socdev = wm8510_socdev; + struct wm8510_setup_data *setup = socdev->codec_data; + struct snd_soc_codec *codec = socdev->codec; + struct i2c_client *i2c; + int ret; + + if (addr != setup->i2c_address) + return -ENODEV; + + client_template.adapter = adap; + client_template.addr = addr; + + i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); + if (i2c == NULL) { + kfree(codec); + return -ENOMEM; + } + i2c_set_clientdata(i2c, codec); + codec->control_data = i2c; + + ret = i2c_attach_client(i2c); + if (ret < 0) { + err("failed to attach codec at addr %x\n", addr); + goto err; + } + + ret = wm8510_init(socdev); + if (ret < 0) { + err("failed to initialise WM8510\n"); + goto err; + } + return ret; + +err: + kfree(codec); + kfree(i2c); + return ret; +} + +static int wm8510_i2c_detach(struct i2c_client *client) +{ + struct snd_soc_codec *codec = i2c_get_clientdata(client); + i2c_detach_client(client); + kfree(codec->reg_cache); + kfree(client); + return 0; +} + +static int wm8510_i2c_attach(struct i2c_adapter *adap) +{ + return i2c_probe(adap, &addr_data, wm8510_codec_probe); +} + +/* corgi i2c codec control layer */ +static struct i2c_driver wm8510_i2c_driver = { + .driver = { + .name = "WM8510 I2C Codec", + .owner = THIS_MODULE, + }, + .id = I2C_DRIVERID_WM8510, + .attach_adapter = wm8510_i2c_attach, + .detach_client = wm8510_i2c_detach, + .command = NULL, +}; + +static struct i2c_client client_template = { + .name = "WM8510", + .driver = &wm8510_i2c_driver, +}; +#endif + +static int wm8510_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct wm8510_setup_data *setup; + struct snd_soc_codec *codec; + int ret = 0; + + info("WM8510 Audio Codec %s", WM8510_VERSION); + + setup = socdev->codec_data; + codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (codec == NULL) + return -ENOMEM; + + socdev->codec = codec; + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + wm8510_socdev = socdev; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + if (setup->i2c_address) { + normal_i2c[0] = setup->i2c_address; + codec->hw_write = (hw_write_t)i2c_master_send; + ret = i2c_add_driver(&wm8510_i2c_driver); + if (ret != 0) + printk(KERN_ERR "can't add i2c driver"); + } +#else + /* Add other interfaces here */ +#endif + return ret; +} + +/* power down chip */ +static int wm8510_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + if (codec->control_data) + wm8510_set_bias_level(codec, SND_SOC_BIAS_OFF); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&wm8510_i2c_driver); +#endif + kfree(codec); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm8510 = { + .probe = wm8510_probe, + .remove = wm8510_remove, + .suspend = wm8510_suspend, + .resume = wm8510_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm8510); + +MODULE_DESCRIPTION("ASoC WM8510 driver"); +MODULE_AUTHOR("Liam Girdwood"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8510.h b/sound/soc/codecs/wm8510.h new file mode 100644 index 0000000..c862e7b --- /dev/null +++ b/sound/soc/codecs/wm8510.h @@ -0,0 +1,103 @@ +/* + * wm8510.h -- WM8510 Soc Audio driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _WM8510_H +#define _WM8510_H + +/* WM8510 register space */ + +#define WM8510_RESET 0x0 +#define WM8510_POWER1 0x1 +#define WM8510_POWER2 0x2 +#define WM8510_POWER3 0x3 +#define WM8510_IFACE 0x4 +#define WM8510_COMP 0x5 +#define WM8510_CLOCK 0x6 +#define WM8510_ADD 0x7 +#define WM8510_GPIO 0x8 +#define WM8510_DAC 0xa +#define WM8510_DACVOL 0xb +#define WM8510_ADC 0xe +#define WM8510_ADCVOL 0xf +#define WM8510_EQ1 0x12 +#define WM8510_EQ2 0x13 +#define WM8510_EQ3 0x14 +#define WM8510_EQ4 0x15 +#define WM8510_EQ5 0x16 +#define WM8510_DACLIM1 0x18 +#define WM8510_DACLIM2 0x19 +#define WM8510_NOTCH1 0x1b +#define WM8510_NOTCH2 0x1c +#define WM8510_NOTCH3 0x1d +#define WM8510_NOTCH4 0x1e +#define WM8510_ALC1 0x20 +#define WM8510_ALC2 0x21 +#define WM8510_ALC3 0x22 +#define WM8510_NGATE 0x23 +#define WM8510_PLLN 0x24 +#define WM8510_PLLK1 0x25 +#define WM8510_PLLK2 0x26 +#define WM8510_PLLK3 0x27 +#define WM8510_ATTEN 0x28 +#define WM8510_INPUT 0x2c +#define WM8510_INPPGA 0x2d +#define WM8510_ADCBOOST 0x2f +#define WM8510_OUTPUT 0x31 +#define WM8510_SPKMIX 0x32 +#define WM8510_SPKVOL 0x36 +#define WM8510_MONOMIX 0x38 + +#define WM8510_CACHEREGNUM 57 + +/* Clock divider Id's */ +#define WM8510_OPCLKDIV 0 +#define WM8510_MCLKDIV 1 +#define WM8510_ADCCLK 2 +#define WM8510_DACCLK 3 +#define WM8510_BCLKDIV 4 + +/* DAC clock dividers */ +#define WM8510_DACCLK_F2 (1 << 3) +#define WM8510_DACCLK_F4 (0 << 3) + +/* ADC clock dividers */ +#define WM8510_ADCCLK_F2 (1 << 3) +#define WM8510_ADCCLK_F4 (0 << 3) + +/* PLL Out dividers */ +#define WM8510_OPCLKDIV_1 (0 << 4) +#define WM8510_OPCLKDIV_2 (1 << 4) +#define WM8510_OPCLKDIV_3 (2 << 4) +#define WM8510_OPCLKDIV_4 (3 << 4) + +/* BCLK clock dividers */ +#define WM8510_BCLKDIV_1 (0 << 2) +#define WM8510_BCLKDIV_2 (1 << 2) +#define WM8510_BCLKDIV_4 (2 << 2) +#define WM8510_BCLKDIV_8 (3 << 2) +#define WM8510_BCLKDIV_16 (4 << 2) +#define WM8510_BCLKDIV_32 (5 << 2) + +/* MCLK clock dividers */ +#define WM8510_MCLKDIV_1 (0 << 5) +#define WM8510_MCLKDIV_1_5 (1 << 5) +#define WM8510_MCLKDIV_2 (2 << 5) +#define WM8510_MCLKDIV_3 (3 << 5) +#define WM8510_MCLKDIV_4 (4 << 5) +#define WM8510_MCLKDIV_6 (5 << 5) +#define WM8510_MCLKDIV_8 (6 << 5) +#define WM8510_MCLKDIV_12 (7 << 5) + +struct wm8510_setup_data { + unsigned short i2c_address; +}; + +extern struct snd_soc_codec_dai wm8510_dai; +extern struct snd_soc_codec_device soc_codec_dev_wm8510; + +#endif