From: Shengjiu Wang shengjiu.wang@nxp.com

[ Upstream commit c33fd110424dfcb544cf55a1b312f43fe1918235 ]

The bit 10 in TX_DPTH_CTRL register controls the TX clock rate. If this bit is set, TX datapath clock should be = 2* TX bit rate. If this bit is not set, TX datapath clock should be 10* TX bit rate.

As the spdif only case, we always use 2 * TX bit clock, so this bit need to be set.

Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com Link: https://lore.kernel.org/r/1700617373-6472-1-git-send-email-shengjiu.wang@nxp... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/fsl/fsl_xcvr.c | 10 ++++++++++ 1 file changed, 10 insertions(+)

diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index fa0a15263c66d..77f8e2394bf93 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -414,6 +414,16 @@ static int fsl_xcvr_prepare(struct snd_pcm_substream *substream,

switch (xcvr->mode) { case FSL_XCVR_MODE_SPDIF: + if (xcvr->soc_data->spdif_only && tx) { + ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_TX_DPTH_CTRL_SET, + FSL_XCVR_TX_DPTH_CTRL_BYPASS_FEM, + FSL_XCVR_TX_DPTH_CTRL_BYPASS_FEM); + if (ret < 0) { + dev_err(dai->dev, "Failed to set bypass fem: %d\n", ret); + return ret; + } + } + fallthrough; case FSL_XCVR_MODE_ARC: if (tx) { ret = fsl_xcvr_en_aud_pll(xcvr, fout);