Re: [alsa-devel] ICH9 Sound
Hello,
all mixer levels are ok. I have several times checked all settings. I deinstalled and reinstalled the drivers in yast2, too.
The phenomenon is that then a sound is playing, once an incredible noice is playing over the original sound. And this sound is stopping first about ten seconds after I closed the player. It's like an feedback loop.
Greetings Ronald
ICH9 sound should be supported. And, as you see, your card is detected. Perhaps the codec or that specific notebook isn't supported. Are you sure mixer levels are adjusted properly?
I'm using a HP Pavilion dv7-1045eg. The Problem is I have no sound, because there is no driver witch works. Here are some reports from my system: / lspci -nv/ 00:1b.0 0403: 8086:293e (rev 03) Subsystem: 103c:30f4 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at df300000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel
/ cat /proc/asound/cards/ 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xdf300000 irq 22
/head -n 1 /proc/asound/card0/codec*/ ==> /proc/asound/card0/codec#0 <== Codec: IDT 92HD71B7X ==> /proc/asound/card0/codec#2 <== Codec: Generic 10de ID 6
I'm using openSuse 11.0 with Kernel 2.6.25.16-0.1-pae. Maybe your project could develop some drivers.
participants (1)
-
Ronald Horn