HDMI on some platforms doesn't enable audio support because its Port Connectivity [31:30] is set to AC_JACK_PORT_NONE: Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x58560010: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 3 0x02 0x03* 0x04

For now, use a quirk to force connectivity based on SSID. If there are more platforms affected by the same issue, we can eye for a more generic solution.

Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com --- v3: - Move the flag into hdmi_spec. v2: - Use a quirk list instead.

sound/pci/hda/patch_hdmi.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index cd46247988e4..b62cd3abb827 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -160,6 +160,7 @@ struct hdmi_spec {

bool use_acomp_notifier; /* use eld_notify callback for hotplug */ bool acomp_registered; /* audio component registered in this driver */ + bool force_connect; /* force connectivity */ struct drm_audio_component_audio_ops drm_audio_ops; int (*port2pin)(struct hda_codec *, int); /* reverse port/pin mapping */

@@ -1701,7 +1702,8 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) * all device entries on the same pin */ config = snd_hda_codec_get_pincfg(codec, pin_nid); - if (get_defcfg_connect(config) == AC_JACK_PORT_NONE) + if (get_defcfg_connect(config) == AC_JACK_PORT_NONE && + !spec->force_connect) return 0;

/* @@ -1803,11 +1805,18 @@ static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t cvt_nid) return 0; }

+static const struct snd_pci_quirk force_connect_list[] = { + SND_PCI_QUIRK(0x103c, 0x871a, "HP", 1), + {} +}; + static int hdmi_parse_codec(struct hda_codec *codec) { + struct hdmi_spec *spec = codec->spec; hda_nid_t start_nid; unsigned int caps; int i, nodes; + const struct snd_pci_quirk *q;

nodes = snd_hda_get_sub_nodes(codec, codec->core.afg, &start_nid); if (!start_nid || nodes < 0) { @@ -1815,6 +1824,11 @@ static int hdmi_parse_codec(struct hda_codec *codec) return -EINVAL; }

+ q = snd_pci_quirk_lookup(codec->bus->pci, force_connect_list); + + if (q && q->value) + spec->force_connect = true; + /* * hdmi_add_pin() assumes total amount of converters to * be known, so first discover all converters