Hi,

I have a HP BPC D7000 machine and run fedora6 + alsa-1.0.14 on it. I found that when I used the front mic,I needed to choose the "Input source " as "Line" to record. Then I read the source code of alsa-1.0.14 and alsa-hg-20080828. I found that the capture_source items is wrong. I tried to fix and test them. It works well on my machine.

When i read the source code, I found that the capture_source items of alc262_HP_capture_source[] are not suitable.In this patch,I fixed them, but i don't have the machine to test them.

--- a/alsa-driver-hg20070828/alsa-kernel/pci/hda/patch_realtek.c 2007-08-24 08:00:06.000000000 +0800 +++ b/alsa-driver-hg20070828/alsa-kernel/pci/hda/patch_realtek.c 2007-08-29 12:47:30.000000000 +0800 @@ -7706,13 +7706,23 @@ .num_items = 5, .items = { { "Mic", 0x0 }, - { "Front Mic", 0x3 }, + { "Front Mic", 0x1 }, { "Line", 0x2 }, { "CD", 0x4 }, { "AUX IN", 0x6 }, }, };

+static struct hda_input_mux alc262_HP_D7000_capture_source = { + .num_items = 4, + .items = { + { "Mic", 0x0 }, + { "Front Mic", 0x2 }, + { "Line", 0x1 }, + { "CD", 0x4 }, + }, +}; + /* mute/unmute internal speaker according to the hp jack and mute state */ static void alc262_fujitsu_automute(struct hda_codec *codec, int force) { @@ -8313,7 +8323,7 @@ .hp_nid = 0x03, .num_channel_mode = ARRAY_SIZE(alc262_modes), .channel_mode = alc262_modes, - .input_mux = &alc262_HP_capture_source, + .input_mux = &alc262_HP_D7000_capture_source, }, [ALC262_HP_BPC_D7000_WL] = { .mixers = { alc262_HP_BPC_WildWest_mixer, @@ -8324,7 +8334,7 @@ .hp_nid = 0x03, .num_channel_mode = ARRAY_SIZE(alc262_modes), .channel_mode = alc262_modes, - .input_mux = &alc262_HP_capture_source, + .input_mux = &alc262_HP_D7000_capture_source, }, [ALC262_BENQ_ED8] = { .mixers = { alc262_base_mixer },