[PATCH] ALSA: hda: intel-nhlt: verify config type
Multiple bug reports report issues with the SOF and SST drivers when dealing with single microphone cases.
We currently read the DMIC array information unconditionally but we don't check that the configuration type is actually a mic array.
When the DMIC link does not rely on a mic array configuration, the recommendation is to check the format information to infer the maximum number of channels, and map this to the number of microphones.
This leaves a potential for a mismatch between actual microphones available in hardware and what the ACPI table contains, but we have no other source of information.
Note that single microphone configurations can alternatively be handled with a 'mic array' configuration along with a 'vendor-defined' geometry.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201251 BugLink: https://github.com/thesofproject/linux/issues/2725 Fixes: 7a33ea70e1868 ('ALSA: hda: intel-nhlt: handle NHLT VENDOR_DEFINED DMIC geometry') Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Guennadi Liakhovetski guennadi.liakhovetski@intel.com Reviewed-by: Rander Wang rander.wang@intel.com Reviewed-by: Kai Vehmanen kai.vehmanen@linux.intel.com --- include/sound/intel-nhlt.h | 5 ++++ sound/hda/intel-nhlt.c | 54 +++++++++++++++++++++++++++++++------- 2 files changed, 50 insertions(+), 9 deletions(-)
diff --git a/include/sound/intel-nhlt.h b/include/sound/intel-nhlt.h index 743c2f442280..d0574805865f 100644 --- a/include/sound/intel-nhlt.h +++ b/include/sound/intel-nhlt.h @@ -112,6 +112,11 @@ struct nhlt_vendor_dmic_array_config { /* TODO add vendor mic config */ } __packed;
+enum { + NHLT_CONFIG_TYPE_GENERIC = 0, + NHLT_CONFIG_TYPE_MIC_ARRAY = 1 +}; + enum { NHLT_MIC_ARRAY_2CH_SMALL = 0xa, NHLT_MIC_ARRAY_2CH_BIG = 0xb, diff --git a/sound/hda/intel-nhlt.c b/sound/hda/intel-nhlt.c index 059aaf04f536..d053beccfaec 100644 --- a/sound/hda/intel-nhlt.c +++ b/sound/hda/intel-nhlt.c @@ -31,18 +31,44 @@ int intel_nhlt_get_dmic_geo(struct device *dev, struct nhlt_acpi_table *nhlt) struct nhlt_endpoint *epnt; struct nhlt_dmic_array_config *cfg; struct nhlt_vendor_dmic_array_config *cfg_vendor; + struct nhlt_fmt *fmt_configs; unsigned int dmic_geo = 0; - u8 j; + u16 max_ch = 0; + u8 i, j;
if (!nhlt) return 0;
- epnt = (struct nhlt_endpoint *)nhlt->desc; + for (j = 0, epnt = nhlt->desc; j < nhlt->endpoint_count; j++, + epnt = (struct nhlt_endpoint *)((u8 *)epnt + epnt->length)) {
- for (j = 0; j < nhlt->endpoint_count; j++) { - if (epnt->linktype == NHLT_LINK_DMIC) { - cfg = (struct nhlt_dmic_array_config *) - (epnt->config.caps); + if (epnt->linktype != NHLT_LINK_DMIC) + continue; + + cfg = (struct nhlt_dmic_array_config *)(epnt->config.caps); + fmt_configs = (struct nhlt_fmt *)(epnt->config.caps + epnt->config.size); + + /* find max number of channels based on format_configuration */ + if (fmt_configs->fmt_count) { + dev_dbg(dev, "%s: found %d format definitions\n", + __func__, fmt_configs->fmt_count); + + for (i = 0; i < fmt_configs->fmt_count; i++) { + struct wav_fmt_ext *fmt_ext; + + fmt_ext = &fmt_configs->fmt_config[i].fmt_ext; + + if (fmt_ext->fmt.channels > max_ch) + max_ch = fmt_ext->fmt.channels; + } + dev_dbg(dev, "%s: max channels found %d\n", __func__, max_ch); + } else { + dev_dbg(dev, "%s: No format information found\n", __func__); + } + + if (cfg->device_config.config_type != NHLT_CONFIG_TYPE_MIC_ARRAY) { + dmic_geo = max_ch; + } else { switch (cfg->array_type) { case NHLT_MIC_ARRAY_2CH_SMALL: case NHLT_MIC_ARRAY_2CH_BIG: @@ -59,13 +85,23 @@ int intel_nhlt_get_dmic_geo(struct device *dev, struct nhlt_acpi_table *nhlt) dmic_geo = cfg_vendor->nb_mics; break; default: - dev_warn(dev, "undefined DMIC array_type 0x%0x\n", - cfg->array_type); + dev_warn(dev, "%s: undefined DMIC array_type 0x%0x\n", + __func__, cfg->array_type); + } + + if (dmic_geo > 0) { + dev_dbg(dev, "%s: Array with %d dmics\n", __func__, dmic_geo); + } + if (max_ch > dmic_geo) { + dev_dbg(dev, "%s: max channels %d exceed dmic number %d\n", + __func__, max_ch, dmic_geo); } } - epnt = (struct nhlt_endpoint *)((u8 *)epnt + epnt->length); }
+ dev_dbg(dev, "%s: dmic number %d max_ch %d\n", + __func__, dmic_geo, max_ch); + return dmic_geo; } EXPORT_SYMBOL_GPL(intel_nhlt_get_dmic_geo);
On Tue, 02 Mar 2021 01:01:46 +0100, Pierre-Louis Bossart wrote:
Multiple bug reports report issues with the SOF and SST drivers when dealing with single microphone cases.
We currently read the DMIC array information unconditionally but we don't check that the configuration type is actually a mic array.
When the DMIC link does not rely on a mic array configuration, the recommendation is to check the format information to infer the maximum number of channels, and map this to the number of microphones.
This leaves a potential for a mismatch between actual microphones available in hardware and what the ACPI table contains, but we have no other source of information.
Note that single microphone configurations can alternatively be handled with a 'mic array' configuration along with a 'vendor-defined' geometry.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201251 BugLink: https://github.com/thesofproject/linux/issues/2725 Fixes: 7a33ea70e1868 ('ALSA: hda: intel-nhlt: handle NHLT VENDOR_DEFINED DMIC geometry') Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Guennadi Liakhovetski guennadi.liakhovetski@intel.com Reviewed-by: Rander Wang rander.wang@intel.com Reviewed-by: Kai Vehmanen kai.vehmanen@linux.intel.com
Thanks, applied.
Takashi
participants (2)
-
Pierre-Louis Bossart
-
Takashi Iwai